- Trusted Seller
21 x 11 ft Hardinge SAG mill with 2,875 HP
- Manufacturer: Hardinge
21 x 11 ft Hardinge SAG mill with 2,875 HP - Mill is currently removed and in storage - Without liners or bolt package - Nuttall gear reducer - McLellan liner handler available separately - Spare motor available...
USA - Trusted Seller
22 x 7 ft (6.7 x 2.1 m) Hardinge SAG Mills
- Manufacturer: Hardinge
22 ft x 7 ft (7 x 2 m) Hardinge SAG Mills - Motor Quoted separately - Previously ran on two 800 HP motors - Dual Flender gearboxes - Shell reconditioned
USA - Trusted Seller
32 x 12 ft (9.8 x 3.6 m) Hardinge Koppers ( Metso) SAG Mill 6800 HP
- Manufacturer: Hardinge
32 x 12 ft (9.8 x 3.7 m) Hardinge Koppers SAG Mill 6800 HP (5100 kW) Two GE wound rotor induction motors: - 3400 HP - 710 RPM - 4000 V - Includes motor starter. - Includes lube system and temperature sensors. - F...
USA - Trusted Seller
24 x 8 ft (7.3 x 2.5 m) Hardinge SAG Mill with 3,000 HP
- Manufacturer: Hardinge
- 2 Flender gearboxes - Liners quoted separately - 3,000 HP GE synchronous motor - Mill is disassembled and in storage
USA - Trusted Seller
8 x 6 ft (2.5 x 1.8 m) Hardinge conical ball mill with 200 HP
- Manufacturer: Hardinge
- 8 x 6 ft Hardinge conical ball mill on a steel skid - Wet grinding, overflow discharge - Single piece shell with access hatch - Falk gear reducer: 5.86:1 reduction ratio, 1.5 SF - Liners installed - Double heli...
USA - Trusted Seller
Hardinge 6X9 Conical Ball Mill
- Manufacturer: Hardinge
6 X 9 Hardinge Conical Ball Mill Serial Number: N/A Date of Purchase: 11-5-18, Purchased Used Condition: Fair, Normal Wear and Tear Maintenance: Was maintained per usual industry practice, Mounted on a steel ...
- Trusted Seller
HARDINGE 6' x 9' (1.8m x 2.7m) Conical Ball Mill, 200 HP (149 kW)
- Manufacturer: Hardinge
HARDINGE 6' x 9' (1.8m x 2.7m) Conical Ball Mill, 200 HP (149 kW) Baldor-Reliance 200 HP (149 kW) Motor Mounted on Steel I-Beam Frame Steel Liners
North America - Trusted Seller
HARDINGE KOPPERS 12' X 5' (3.7m x 1.5m) Sag Mill with 250 HP motor
- Manufacturer: Hardinge
HARDINGE KOPPERS 12' X 5' (3.7m x 1.5m) Sag Mill with 250 HP (186 kW)motor Operating Skid Helical Gear 250 HP (186 kW) Motor, 60 Hz
North America - Trusted Seller
Hardinge 4.5ft x 24in Conical Ball Mill
- Manufacturer: Hardinge
Capacities: Size: 4.5ft x 24in | Discharge: Overflow | Ball charge: 2.25-2.85 Tons (Not Included) | Recommended drive: 20-25HP (Not Included) | 1.5in to 10 mesh: 3.5TPH | 0.75in to 48 mesh: 1.8 TPH | 0.5in to 100...
Western United States, USA - Trusted Seller
HARDINGE-KOPPERS 32' x 12' (9.8m X 3.7m) EGL SAG Mill, 6,800 HP dual drive (2 x 2,550 kw)
- Manufacturer: Hardinge
HARDINGE-KOPPERS 32' x 12' (9.8m X 3.7m) EGL SAG Mill, 6,800 HP dual drive (2 x 2,550 kw) (2) 3400 HP (2550 kW) Wound Rotor Induction Motors McLellan MLC 32/12S Liner Handler
North America - Trusted Seller
Hardinge 10ft Dia. x 5ft Long Conical Ball Mill
- Manufacturer: Hardinge
Trommel Discharge Size: 10ft Dia. x 5ft Long | Drive: No Motor Included | Gearbox: Falk Enclosed Gear Drive | Ratio: 7.211
Western United States, USA - Trusted Seller
Hardinge Conical 8ft. x 22in. Ball Mill
- Manufacturer: Hardinge
Pinion Gear 21 Teeth Bull Gear (Single Helical) 143 Teeth Allis Chalmers Motor 125 HP 230/460 Volt 1725 RPM
Western United States, USA - Trusted Seller
Mill, Ball, 11' x 14', Hardinge-Koppers, No motor #D740104
- Manufacturer: Hardinge
Hardinge-Koppers Ball Mill, 11' x 14', no motor. Includes mill shell, bull gear, feed and discharge heads with trunnion liners, shell liners, and gear covers. Trunnion journals measure 48" diameter x 15" wide.
California, USA - Trusted Seller
Mill, SAG, 32' x 12', Hardinge-Koppers, 6800 HP Dual Drive #D744636
- Manufacturer: Hardinge
32' x 12' SAG mill, manufactured by Hardinge-Koppers, driven by dual GE 3400 HP 4000 V, 60 Hz AC wound rotor induction motors, model 108770. Complete with trunnions, trunnion liners, girth gear, pinion assemblies...
Canada - Trusted Seller
Hardinge-Koppers 12 x 5 Sag Mill
- Manufacturer: Hardinge
Self-Aligning Bearings Bearing Sole Plates Single Helical Bull and Pinion Gear Louis Allis 250HP Electric Motor Control Panel Falk Parallel-Shaft Gear Reducer Air Clutch Internal Grate Discharge External Trommel ...
Savona, Canada
Tip: Enter manufacturer, model or keyword