Used Materials Testing in Gauteng, South Africa

Assembly materials tester (MT 190)

• Manufacturer: Labequip

kit of a unit for basic experiments in materials testing Description: The MT 190unit is supplied as a kit and contains all mechanical parts, measuring units, hydraulic components with seals and pipe material with...

Automatic Tension & Compression Testing Machine (UTM-3000)

• Manufacturer: Labequip

Product Codes: GENERAL PROPERTIES: UTM-3000 automatic 500 kN tension and 1000 kN compression testing machine has been designed to meet the need for reliable and consistent tensile testing of steel rebars up to 22...

Hydraulic Universal Testing Machine (UTM-4000)

• Manufacturer: Labequip

Product Codes: Description: UTM 4000 Universal Hydraulic Tensile Test Machine is designed to test the ferrous materials for structural values such as yield strength and tensile strength. Apart from tensile tests,...

Plastic Limit Test Set (UTS-0250B.E)

• Manufacturer: UTEST

Soil Classification The plastic limit (PL) is defined as the lowest moisture content of a soil that will permit a sample to be rolled into threads of 3 mm diameter without the threads breaking. The Plastic Limit ...

Air Spring Testing System

Description: UTEST Air Spring Testing System is designed to verify EN 13913 Rail way applications (Rubber suspension components, Elastomer-based mechanical parts) and EN 14817 Railway applications (Suspension com...

Torsion test 200Nm, motor drive (WP 510)

measure the test moment by means of strain gauge Description: The torsion test is a destructive testing method that studies the plastic behaviour of materials. In practice, components that are twisted in their ap...

Wide Wheel Abrasion Testing Machine (UTA-0610)

Mechanical and Physical Properties · Narrow Wheel: 10545-6, 12808-2 Product Code: Description: UTA-0610 Abrasion Testing Machine is designed for determining the resistance to abrasion/wear of natural ston...

Concrete Creep Testing System (UTSP-0400)

• Manufacturer: UTEST

Description: UTEST Creep Testing System on Concrete specimen is designed to determine time – dependent deformation of concrete under sustained and constant load. Deformation is monitored periodically over time an...

Frame for load testing, 400kN (SE 100)

load tests on components from steelwork and civil engineering Description: The demands of modern, technically sophisticated designs require a solid understanding of the strength and deformation of components. Dif...

Manhole Tops Testing Machine (UTSP-0350)

• Manufacturer: UTEST

Description: Manhole Tops Testing Machine has been designed to make test according to EN 1917 standard on concrete manholes and inspection chambers, unreinforced, steel fibre and reinforced. Testing machine is co...

Semi-Automatic Flexural Testing Machine (UTC-5610.SLP)

• Manufacturer: UTEST

Compression and Flexural Testing Machines Product Codes: Description: The UTEST Semi-Automatic range of 200 kN capacity flexure testing machine was been designed for reliable and consistent testing of flexural te...

Automatic Uniaxial &Triaxial Testing Machine (UTR-0450.PVPR)

• Manufacturer: UTEST

Strength and Deformability Tests Product Codes: Description: The UTR-0450.PVPR Automatic Pressure Unit is used to apply lateral pressure in the Hoek Cell during the triaxial testing of rock specimens. The power p...

Accessories for Uniaxial Compression and Splitting Tensile Tests (UTR-0400)

• Manufacturer: Labequip

Strength and Deformability Tests Product Codes: Description: UTR-0400 is used for uniaxial compressive strength tests of rock core specimens with 47to 63,5 mm. Supplied with 2 pcs. 32mm and 1 pc. 20 mm distance p...

Servo Hydraulic Universal Testing Machine, Servo Valve (UTM-0600S)

• Manufacturer: Labequip

Servo Hydraulic Universal Testing Machines Product Codes: UTM-0600S Servo-Hydraulic Universal Testing Machine, 600 kN UTM-1000S Servo-Hydraulic Universal Testing Machine, 1000 kN UTM-2000S Se...

CBR Test Machine with Load Ring (UTS-0852)

• Manufacturer: UTEST

Compacted Road Base and Sub-base Soils Description: The UTS-0852 is designed for performing laboratory evaluation of the CBR value of highway sub bases and subgrade and for the determination of strength of cohesi...