Used Materials Testing in Gauteng, South Africa

Buckling of bars (SE 110.57)

• Manufacturer: Labequip

demonstration of buckling in bars Description: Long and slim components such as bars, beams and columns are often subjected to compressive forces along their long axis owing to their function. Under the influence...

Automatic Asphalt Indentation Penetrometer (UTAS-2130)

Design and Testing of Bituminous Mixtures Product Codes: Description: UTAS-2130 Automatic Indentation Penetrometer determines the resistance of an asphalt cube and cylindrical specimens to indentation when force ...

MOT Straightedge (UTAS-2127)

Design and Testing of Bituminous Mixtures Product Codes: Description: The straightedge is used for measuring single irregularities attributable to quality defects in new surface course(s) of roads, airfields and ...

Travelling Beam Device (UTAS-2125)

• Manufacturer: Labequip

Design and Testing of Bituminous Mixtures Description: The UTAS-2125 Travelling Beam Device is used to check for any irregularities in both concrete and bituminous road surfaces. Deviation of the surface from a s...

Distance Pieces and Platens for Frames (UTCM-4630)

• Manufacturer: Labequip

Compression and Flexural Machines Product Code: Distance Pieces for Frame: Due to the modular design of the frames any sample with suitable size, load and pace rate can be test on both chambers by decreasing the ...

Torsion of bars (SE110.29)

• Manufacturer: Labequip

elastic torsion of a bar under a torque Description: Torsion occurs primarily on axles and drive shafts in motor vehicles and machines. The torsion occurring in the shaft cause cross-sections of the shaft to be p...

Investigation of simple stability problems (SE 110.19)

• Manufacturer: Labequip

representation of simple stability problems on a buckling bar Description: Buckling is a stability problem which occurs in practice when slim components are subjected to compressive loading. Following a “disturba...

FULLY-AUTOMATED RESILIENT MODULUS UNIT (LoadTrac II-RM)

• Manufacturer: Geocomp

Advanced Soil Systems Geocomp’s LoadTrac II Resilient Modulus unit fully automates resilient modulus tests on base/subbase/subgrade materials. The LoadTrac II meets or exceeds all specifications for Resilient Mod...

Melting Pot (UTC-1070)

• Manufacturer: Labequip

Hardened Concrete Testing Product Codes: Description: The Melting Pot is designed for melting capping compound, sulphur, wax and similar materials. The melted paraffin wax is used to seal soil samples and other m...

TRL DCP – DYNAMIC CONE PENETROMETER (LES-DCP)

The TRL Dynamic Cone Penetrometer (DCP) Supplied by Laboratory Equipment Supplies is an instrument designed for the rapid in-situ measurement of the structural properties of existing road pavements constructed of...

Displacement Transducers & Dial Gauges (UTGM-0060)

• Manufacturer: Labequip

Measuring Instruments Product Codes: Description: Linear Potentiometric Displacement Transducer (LPDT) provides an electric signal proportional to the linear shaft displacement. UTEST supplies high quality Linear...

Vebe Consistometer (UTC-0560E)

Fresh Concrete Testing Product Codes: Description: UTC-0560E model consistometer conforms to EN 12350-3 for determining the consistency of fresh concrete by means of the Vebe time. The unit consists of a vibratin...

FULLY-AUTOMATED SHEARTRAC III SYSTEM (ShearTrac III)

• Manufacturer: Labequip

Advanced Soil Systems ASTM D-5321 and D-6243 ASTM 3080/T236 BS 1377 The ShearTrac IIITM system is capable of performing the consolidation and shear- ing phases of a 305 mm x 305 mm (12 x 12 in. by 200mm(8.0 in) h...

RSI-ShearTrac-II (RSI-ShearTrac-II)

Classification Tests Product Code: RSI-ShearTrac-II / 13 kN (3,000 lbs.) frame capacity Description: The Rock Shear Interface (RSI) is a versatile system capable of performing the consolidation and shearing phase...

Lower and Upper Platens (UTC-4511)

• Manufacturer: Labequip

Compression Testing Frames Product Code: Descriptions: The platens enable the testing of a wide variety of cylinder, cube, blocks or similar specimens. Manufactured from high quality steel, which is then hardened...