Used Centrifugal Pumps in USA

Centrifugal Pump 386.1 m3/h (1,700 GPM) Titanium - IPP# 232563

• Manufacturer: Goulds

wet end size 6 x 8-15 on the 316SS shaft The pump gear box is flood oil lubricated The suction flange is 8” ANSI 150#, and the discharge flange is 6” ANSI 150# Wet section only, no driver or base

Centrifugal Pump 386.1 m3/h (1,700 GPM) Titanium - IPP# 232564

• Manufacturer: Goulds

wet end size 6 x 8-15 With a mechanical seal on the 316SS shaft The pump gear box is flood oil lubricated The suction flange is 8” ANSI 150#, and the discharge flange is 6” ANSI 150# Wet section only no driver or...

Grundfos CRN16-30/2 A-P-G-AUUE Coolant Pump 18m³/h 3kw 480V 3PH 2" DN50

• Manufacturer: Grundfos
• Model: CRN16-30

In Good Used Condition, Removed from a Working Environment. If this item ships as Flat Rate Freight please see details in Shipping tab

Vertical Centrifugal Pump

Vertical centrifugal pump. Specs unknown - last used as Scrubber pump.

Centrifugal Pump 318 m3/h (1,400 GPM) Tantalum - IPP# 28789

• Manufacturer: Fansteel

Mfd by Fansteel 63 Vert split, end suction, top discharge. No motor.

Centrifugal Pump 22.7 m3/h (100 GPM) Teflon - IPP# 220956

• Manufacturer: Durco

Size 3 x 1.5 T 64 50 With Dura Seal AC motor 230/460 volts

Stainless Steel 316L Fristam FP 1732 Centrifugal Pump - IPP# 230707

• Manufacturer: Fristam
• Model: FP1732

25 Ra electropolished internal finish with a silicon carbide double mechanical seal. Viton is the elastomer material

Stainless Steel 316L Fristam FP 1732 Centrifugal Pump - IPP# 230710

• Manufacturer: Fristam
• Model: FP1732

25 Ra electropolished internal finish with a silicon carbide double mechanical seal. Viton is the elastomer material.

Centrifugal Pump 60 m3/h (264.2 GPM) Graphite - IPP# 229043

• Manufacturer: Klauss Union (Germany)

Order number: 1.36700 Housing material: Carbon steel- Bucket wheel material: Stainless steel (material number 1.0619) Openings: (1) DN80, (1) DN50 Motor: None

Centrifugal Pump 10 m3/h (43.9 GPM) Plastic - IPP# 220551

• Manufacturer: Wernert-Pumpen GmbH

IPP 55 openings (1) DN50, (1) DN 65 type d3A100L20,

Centrifugal Pump 8 m3/h (35.2 GPM) Plastic - IPP# 220550

• Manufacturer: Wernert-Pumpen GmbH

IP 55 openings (1) 50mm, (1) 32 mm type d3A 132 S1C-2

Centrifugal Pump 25 m3/h (110.1 GPM) Glasslined - IPP# 204190

• Manufacturer: Pfaudler

-10/160 degrees C no motor

Centrifugal Pump 200 m3/h (880.6 GPM) Graphite - IPP# 220425

• Manufacturer: Klauss Union (Germany)

40m conveying height with carbon steel housing and stainless steel bucket wheel openings: (1) DN125, (1) DN150 no motor

Centrifugal Pump 726.8 m3/h (3,200 GPM) Tantalum - IPP# 28786

• Manufacturer: Barrett Haentjens

8" x 6" impellor. Vert split, end suction, top discharge. No motor. takes 900 HP, 3600 rpm motor. 4000 Volts.