Used Haas Machine Tools

Trusted Seller
2010 HAAS DT-1
- Manufacturer: Haas
- Model: DT-1
2010 Haas DT-1 CNC Drilling and Tapping Machine. Machine is under power for inspection and can be viewed as needed. Machine comes with the Haas TR110 dual axis trunnion (4 +1). Haas TR110 4th and 5th Axis Rotary ...
Schaumburg, IL
Trusted Seller
2006 Haas TM-2
- Manufacturer: Haas
- Model: TM-2
Equipped With Cool Through Spindle Machine type: Vertical Machining Centers | Machine location: Nevada | Stock #: 836487 | X-axis travel: 40″ | Y-axis travel: 16″ | Z-axis travel: 16″ | Table size: 54″ x 10″ | Ma...
$19,900 USD
Get financing
Est. $391/mo
Chicago, IL
Trusted Seller
Haas 30 Amp Servo amplifier from a 2018 Haas TM-1P
- Manufacturer: Haas
- Model: TM-1P
#1428 a - Haas 30 Amp Servo amplifier from a 2018 Haas TM-1P Offered by Rockfishmachinery Machine is sold "as-is, where-is" with no warranty unless otherwise stated. Locations of machine vary, contact George wit...
$800 USD
Waynesboro, VA
Trusted Seller
2000 Haas VF-3
- Manufacturer: Haas
- Model: VF-3
- Spindle taper: CT 40
Machine type: Vertical Machining Centers | Machine location: Connecticut | Stock #: 716250 | Table size: 48″ x 18″ | Table load capacity: 3,500 lbs | Table top to spindle nose: 4″ – 29″ | X-axis travel: 40″ | Y-...
$9,900 USD
Get financing
Est. $194/mo
Chicago, IL
Trusted Seller
2007 HAAS VF-3
- Manufacturer: Haas
- Model: VF-3
- Spindle taper: CT 40
HAAS VF-3 CNC Vertical Machining Center, 2007, used. Specs: X/Y/Z: 40"/20"/25", Power: 30 hp, RPM: 10,000, ATC: 40, Taper: 40, Table: 18"W x 48"L, 4-axis. Equipped with Haas VOP-D, HRT 210 Rotary Table, 2 Speed G...
Barrington, IL
Trusted Seller
2010 HAAS VM-3
- Manufacturer: Haas
- Model: VM-3
Experience top-notch machining with this 2010 Haas VM-3 Vertical Machining Center. It's used but in good condition. Enjoy a 40" X-axis, 26" Y-axis and 25" Z-axis. The machine features a robust power of 30hp and 1...
Barrington, IL
Trusted Seller
2011 Haas Mini Mill
- Manufacturer: Haas
- Model: MINIMILL
Direct Belt Drive RS 232 Port Coolant Tank w/Pump Accepts Single or 3-Phase Power All Available Manuals
$24,500 USD
Get financing
Est. $461/mo
Michigan, USA
2006 Haas VF6D/40 Vertical Machining Center
- Manufacturer: Haas
- Model: VF-6D/40
64” x 28” Table 64” X-Axis Travel 32” Y-Axis Travel 30” Z-Axis Travel 20 HP Vector Drive 24 Side Mount ATC 40 Taper Spindle 15,000 RPM Spindle Thru Spindle Coolant Air Blast Programmable Coolant Chip Auger Alumin...
$69,500 USD
Get financing
Est. $1,308/mo
Troy, MI
Trusted Seller
2015 HAAS DM-1
- Manufacturer: Haas
- Model: DM-1
Haas DM-1 CNC Vertical Machining Center, used. Specifications: 20" X, 16" Y, 15.5" Z, 15 hp, 15,000 RPM, 18 ATC, 40 Taper. Features Wireless Intuitive Probing, High Speed Machining, Rigid Tapping, Chip Auger, Mis...
Barrington, IL
Trusted Seller
2007 HAAS VF-3
- Manufacturer: Haas
- Model: VF-3
- Spindle taper: CT 40
HAAS VF-3 CNC Vertical Machining Center, 2007, used. Specs: X/Y/Z: 40"/20"/25", Power: 30 hp, RPM: 10,000, ATC: 40, Taper: 40, Table: 18"W x 48"L, 4-axis. Equipped with Haas VOP-D, HRT 210 Rotary Table, 2 Speed G...
Barrington, IL
Trusted Seller
2018 HAAS VF-2
- Manufacturer: Haas
- Model: VF-2
- Spindle taper: BT 40
TRAVELS S.A.E METRIC X Axis 30.0 in 762 mm Y Axis 16.0 in 406 mm Z Axis 20.0 in 508 mm Spindle Nose to Table (~ max) 24.0 in 610 mm Spindle Nose to Table (~ min) 4.0 in 102 mm SPINDLE S.A.E METRIC Max Rating 30.0...
Prospect Heights, IL
2022 HAAS GR510
- Manufacturer: Haas
- Model: GR-510
- Spindle taper: CT 40
Max Weight on Table (evenly distributed): 6000 LBS Distance Between Columns: 62" Feedrates Axis Motors Tool Changer Tooling Taper (BT/CT) 8.1K-40T-15HP CHIP STRAINER LOW-VOLT 1GB ETHERNET HAAS CONNECT HAASDROP HS...
$119,500 USD
Get financing
Est. $2,249/mo
Kentucky, USA
HAAS VF-9/40 VERTICAL MACHINING CENTER, NEW 2007, LOW HOURS
- Manufacturer: Haas
- Model: VF-9/40
HAAS VF-9/40 VERTICAL MACHINING CENTER, NEW 2007, LOW HOURS CATALOG SPECIFICATIONS: Table size: 84" x 36" Table capacity: 4,000 pounds X-axis travel: 84" Y-axis travel: 40" Z-axis travel: 30" Rapid travers...
Commerce Township, MI
Trusted Seller
2023 HAAS VF-2
- Manufacturer: Haas
- Model: VF-2
- Spindle taper: BT 40
Chip Auger USB/Ethernet X: 30" | Y: 16" | Z: 20" | Power: 30 hp | Rpm: 8,100 RPM | # atc: 20 | Taper: CT 40 | Table-w: 14" | Table-l: 36" | # axis: 3 | Control: CNC (Haas (Next Gen))
Schaumburg, IL
Trusted Seller
2001 Haas VF-1
- Manufacturer: Haas
- Model: VF-1
- Spindle taper: CAT 40
Equipped With: P-Cool Chip Auger 4th Axis Ready (Brushless) Quick Code 2 speed Gear Box Rigid Tapping
$9,900 USD
Get financing
Est. $194/mo
Chicago, IL
Haas HS-1 Machining Center
- Manufacturer: Haas
- Model: HS-1
Good condition Haas HS-1 Machining Centers available between 1994 and 2002 years. Located in Poland and other countries. Click request price for more information.
Poland