Used Machining Centers in Saxony, Germany

STANKO clamping table

• Manufacturer: Stanko

Clamping table, clamping plate, machine table STANKO Clamping table 1100 x 250 mm spare part for milling machine STANKO 6N81G ! used, tested !

COLLET & ENGELHARD angle head

• Manufacturer: COLLET & ENGELHARD

Angle head, milling head , drill head COLLET & ENGELHARD BFf 100/110 nu Tool holder: SK50 360 ° rotatable 6x bore: Ø 16.5 mm, with countersunk hole Ø 25 mm, depth: 15 mm used, tested !

PAGUS clamping table

• Manufacturer: Pagus

Clamping table, machine table PAGUS with clamping claws !

WMW clamping table

• Manufacturer: WMW

Clamping table, clamping plate, milling table, machine table WMW guide groove: width: 12 mm, depth: 5 mm ( on top and bottom side ) used, tested !

NSK linear guide carriage with rail

• Manufacturer: NSK

Linear guide carriage, 3 pieces , with linear guide rail NSK LGY45 ( 3 pieces ) Linear guide rail: length: 1935 mm, width: 45 mm, height: 37.5 mm Spare part e.g. for machining center MAZAK AJV25/405 ! used, tested !

WMW milling head

• Manufacturer: WMW

Milling head , with clamping drive and coupling device WMW, HECKERT FSS400 Tool holder: SK50 360 ° rotatable outer flange diameter ( inside / outside ): Ø 429 / 585 mm Clamping drive: ROTO RECORD EDU I80 HDR Coup...

Clamping angle 1,255 x 1,020 mm

Clamping angle WMW used, tested ! Clamping: 1,250 mm x 1,000 mm | Groove width: 35 / 60 mm | Total groove depth: about 60 mm | Groove depth with 60 mm width: approx. 28 mm | Groove distance: approx. 200 mm | Thic...

WMW clamping table

• Manufacturer: WMW

Clamping table, clamping plate, milling table, machine table, with chip tray WMW used, tested !

SCHNEEBERGER linear guide carriage with linear guide rail

• Manufacturer: Schneeberger

Linear Guide Carriages, 2 pieces , with linear guide rail SCHNEEBERGER NILES SIMMONS MRB 55 2000-W2-G1-V3-GP ( MRB552000-W2-G1-V3-GP) 1x Linear Guide Rail: Length: 2000 mm, Width: 53 mm, Height: 48 mm 31x Blind H...

LISEGA Federstütze

Federstütze LISEGA Typ 29 41 18 ( 29-41-18 ) Stange: Durchmesser ( Innen / Außen ): Ø 52 / 61 mm Geäusedurchmesser: Ø 155 mm, Höhe: 180 mm Fuß: Ø 190 x 190 mm, Dicke: 12 mm Neu !

SDK support roller

Support roller, 4 pieces SDK Kugellager GmbH Ø 60 x 40 mm Internal thread: M16 x 2.0, depth: 40 mm 2x ball bearing: SKF 6005-2RSH New !

PAGUS Frässpindel

• Manufacturer: Pagus

Frässpindel, Horizontalspindel PAGUS 550 mm Werkeugaufnahme: Ø 18,5 / 19 mm, Länge: 17 mm Lagersitz: Ø 36 mm, Länge: 45 mm Welle mit Nut: Ø 40 mm, Länge: 95 mm, Nut: Ø 12 x 59 mm Lagersitz: Ø 55 mm, Länge: 40 mm ...

PAGUS rail wheel

• Manufacturer: Pagus

Rail wheel, flanged wheel, heavy-duty wheel PAGUS Ø 250 x 50 Hollow shaft diameter: Ø 80 mm, length: 95 mm Other rail wheels available here: Search results for rail wheels New!

PAGUS rail wheel

• Manufacturer: Pagus

Rail wheel, flanged wheel, heavy-duty wheel PAGUS Ø 400 x 65 Hollow shaft diameter: Ø 80 mm, length: 240 mm More rail wheels available here: Search results rail wheels New !

STARRAG telescopic cover

• Manufacturer: Starrag

Teleskopabdeckung, rechte Seite STARRAG, STARRAG HECKERT CPTH316010 Artikel Nr. 152459 Ersatzteil u.a. für Bearbeitungszentrum HECKERT CWK400 D ! Siehe auch S1905, S1907 und S1908 ! gebraucht, geprüft !