Used Processing in North Carolina, USA

PowerVar Security Plus Series UPS Units

• Manufacturer: AMETEK Powervar

THIS SALE IS FOR POWERVAR SECURITY PLUS SERIES UPS UNITS This asset consists of two industrial uninterruptible power supply (UPS) units. Each unit measures approximately 33 in (H) × 19 in (W) × 30 in (D) and weig...

Barnstead Lab-Line Multi Wrist Shaker

• Manufacturer: Barnstead/Thermolyne

THIS SALE IS FOR A BARNSTEAD LAB-LINE MULTI WRIST SHAKER This asset is a laboratory wrist-action shaker used for sample agitation. Approximate dimensions are 11 in (W) × 15 in (D) × 10 in (H), with an estimated w...

Horizon Technology DRYVAP System Model 5000

• Manufacturer: Horizon

THIS SALE IS FOR A HORIZON TECHNOLOGY DRYVAP SYSTEM MODEL 5000 This asset is a laboratory DRYVAP concentrator system. Approximate dimensions are 28 in (W) × 19 in (D) × 18 in (H), and the unit weighs approximatel...

Two (2) High Thrust U.S. Electrical Motor – 25 HP

• Manufacturer: U.S. Motors

THIS SALE IS FOR TWO HIGH THRUST U.S. ELECTRICAL 25HP MOTORS This asset consists of two industrial high-thrust electric motors rated at 25 horsepower each. Approximate dimensions per motor are a height of ~48 inc...

1977 ROYAL TUT

• Manufacturer: Royal

You are bidding on a WELL LOVED, Workable Condition TURRENT TRAILER by Royal Mfg. Co. This is VINTAGE form 1977, but still holds its own. Unfortunately, I do not have much information to share on her, except that...

ITEM 2792: FULLER COMPANY SUTORBILT MODEL 8H-B

• Manufacturer: Fuller Company

ITEM 2792: FULLER COMPANY SUTORBILT MODEL 8H-B MODEL 8H-B SERIAL # 173316 JC CROSS CO. JOB # 0GM102416-2 1 ¾” DIAMETER DRIVE SHAFT CARBON STEEL

ITEM 2517-3: 30” STAINLESS SCREENER DECK WITH MATERIAL CENTERING RING

ITEM 2517-3: 30” STAINLESS SCREENER DECK WITH MATERIAL CENTERING RING 6” DIAMETER OUTLET STAINLESS CONSTRUCTION 6” TALL SIDEWALLS

50 HP BAUER BROTHERS NUT GRINDER MODEL 248, SIZE 18

ITEM 1571: 50 HP BAUER BROTHERS NUT GRINDER MODEL 248, SIZE 18. DEIGNED FOR 1800 RPM. 50 HP 220-440-3-60 VOLT, FRAME 385U, MOTOR. ORIGINALLY USED TO GRIND UP NUTS.

Martin Netter Vibration PKL 5000 Pneumatic "Thumper" Impacting Vibrator

• Manufacturer: Martin

ITEM 15988: Martin Netter Vibration PKL 5000 Pneumatic “Thumper” Impacting Vibrator Stainless steel cylinder housing 4.5″Ø X 13.75″ long with flange mounting and hardware. Unit weight: 43LBS

Falk Gear Reducer 4E2-06A, 11.12 ratio

• Manufacturer: Falk

ITEM 1180: Falk Gear Reducer 4E2-06A, 11.12 ratio. 1750 PRM INPUT; 157 RPM OUTPUT15, shafts are 2-1/2 inch/1-1/2 inch Unit is factory remanufactured and not used since remanufacturing..

ITEM 2981: 13” DIAMETER GRATE MAGNET NEODYMIUM EXCELLENT CONDITION

• Manufacturer: Cooper Industries

ITEM 2981: 13” DIAMETER GRATE MAGNET NEODYMIUM EXCELLENT CONDITION. VERY POWERFUL

ITEM 2948: 8 MESH, 3/32” OPENINGS STAINLESS 19” DIAMETER MANUAL DRUM SCREENER LUMP CATCHER SERIAL # N0129.002

• Manufacturer: Cooper Industries

ITEM 2948: 8 MESH, 3/32” OPENINGS STAINLESS 19” DIAMETER MANUAL DRUM SCREENER LUMP CATCHER SERIAL # N0129.002 8 MESH; 3/32” OPENINGS 19” DIAMETER W/ 21” O.D. LIP STAINLESS; USED SCREEN LABEL: N0129.002

ITEM 2799-6: 3” LORENZ KNIFE GATE DIVERTER STAINLESS MODEL DV2-300-11SS-Y-C USED

• Manufacturer: Lorenz

ITEM 2799-6: 3” LORENZ KNIFE GATE DIVERTER STAINLESS MODEL DV2-300-11SS-Y-C USED MODEL # DV2-300-11SS-Y-C ID # 20641-01-004 3” DIAM INLET/OUTLETS STAINLESS CONSTRUCTION USED

ITEM 2040: 4” DIAMETER INDUSTRIAL MAGNETICS INC., 4 ½” I.D. GRAVITY GRATE MAGNET STAINLESS I.D. # C106912

• Manufacturer: Industrial Magnetics Inc.

ITEM 2040: 4” DIAMETER INDUSTRIAL MAGNETICS INC., 4 ½” I.D. GRAVITY GRATE MAGNET STAINLESS I.D. # C106912 PART # IMH0606R3EZA643 I.D. # C106912 4 ½” I.D. INLET/OUTLET 9” O.D. FLANGES SELF CLEANING PULL

18” X 7 ½” BUNTING PLATE MAGNET

• Manufacturer: Bunting

ITEM 2146-2: 18” X 7 ½” BUNTING PLATE MAGNET STAINLESS CONSTRUCTION