Used Processing in British Columbia, Canada

36" Conveyor

- Truss type - Covered with catwalk - c/w two (2) sets of drives & belt - 40'-0" sections - 500" feet available

36" x 45' Troughing Roll Conveyor

- Channel frame construction - Approx. 45' long (two sections) - 25 HP drive assembly (no motor) c/w head pulley - Tail pulley - Belt

36" x 29' Troughing Roll Conveyor

- Channel frame construction - Approx. 29' long - 15 HP drive assembly c/w head pulley - Tail pulley (loose) - Belt

CHIP FEEDER ALLIED 42 X 42

• Manufacturer: Allied

- Allied 42" x 42" - rubber tipped feeder - 10 HP gearhead drive - located in Vancouver, BC

Optimil Double Length Infeed - Side Shift and Skew

• Manufacturer: Optimil

- Built in 1999 - 4" to 20" diameter (was set up for 14" diameter) - 8' to 20' length - Base feed speed 300 FPM @ 60 hz - Main frame supported on two (2) roundway slides c/w linear positioners - Twelve (12) holdd...

Comact DDM10 Line

• Manufacturer: Comact

- 10 years old - Approx. 120' V-flite conveyor including drive and attached control devices - Flying log turner - new HD upgrade 2011-12? (Quad roll) - DDM10 full profile machine, 480 volt - All drive units, moto...

16" x 39" Roots High Pressure Blower

• Manufacturer: Roots

- Top in, bottom out - Inlet volume 46005 - Driver and driven poly chain pulleys c/w belt - No motor - Silencer and piping not included

SUTORBILT 713V-4500 BLOWER

- rebuilt

50 HP Low Pressure Blower

- 44" fan - Decent shape - 460 volt - Good for up to 20,000 CFM

Holman Screw Air Compressor

• Manufacturer: Holman

- 150 HP motor, 440 volt, 1770 RPM

2000 400 bbl Fuel Tank

• Manufacturer: Argo

Used for Diesel Pasc condition rating: B | Skidded: Yes | Housed: No | Connection status: Connected | Capacity: 400 bbl | Capacity(unit of measure): bbl | Capacity(use selected unit of measure as display unit): f...

Lunden Stacker System - Right Hand

• Manufacturer: Lunden

- Package size 48" wide x 72" tall - Bar type unscrambler - Accumulation chains - Even ending chain fence - Lunden stacker (no stick placer) - Boxing forks to create a fixed package width - Take away chain transf...

LSI Stacker c/w Stick Placer

• Manufacturer: LSI

- Right hand - 8' to 20' - 54" wide x 48" high package - 1-1/2" wide x 3/4" thick x 54" long stickers - Five (5) chainways c/w electric drive - Six (6) forks c/w linear positioner actuator - Five (5) arm hoist c/...

20' Rollcase (Approx.)

• Manufacturer: Canadian Mill Equipment

- Seven (7) 8" diameter x 34" face bedrolls c/w double single chain drive mounted onto a channel frame - No drive unit

24' Rollcase

• Manufacturer: Canadian Mill Equipment

- Pop up c/w air bags - Rolls are approximately 48" wide - Approximately 24' long - No drive