Used Material Handling

1989 Novatec NPH-HOPPER Used

• Manufacturer: Novatec
• Model: NPH-

600 lb Capacity Buyers are welcome to inspect equipment prior to purchase. Expedited shipping services are available upon request. This piece is located at Ideal Machinery, Inc. on our showroom floor. Located...

BUNTING Drawer Magnet Used

• Manufacturer: Bunting

Inlet: 4 1/4 Outlet: 2 3/4 Flange: 7 3/4 x 7 3/4 Holes center-to-center: 6 3/4 x 6 3/4 Buyers are welcome to inspect equipment prior to purchase. Expedited shipping services are available upon request. This...

Generic Drawer Magnet Used

• Manufacturer: Generic

Inlet ID: 2 Outlet ID: 2 Flange: 4 1/2 x 4 1/2 Holes center-to-center: 2 1/2 x 2 1/2 Buyers are welcome to inspect equipment prior to purchase. Expedited shipping services are available upon request. This p...

BUNTING Drawer Magnet Used

• Manufacturer: Bunting

Inlet ID: 4 1/4 Outlet ID: 2 1/2 Flange: 6 x 6 Holes center-to-center: 4 3/4 x 4 3/4 Buyers are welcome to inspect equipment prior to purchase. Expedited shipping services are available upon request. This p...

BUNTING Drawer Magnet Used

• Manufacturer: Bunting

Inlet ID: 4 1/2 Outlet ID: 3 Flange: 6 x 6 Holes center-to-center: 4 1/2 x 4 1/2 Buyers are welcome to inspect equipment prior to purchase. Expedited shipping services are available upon request. This piece...

PPE TAL-15UFX Loader Used

• Manufacturer: PPE

1.1 kW 115 Volt Single Phase 60 Hz 3" Cylinder Height 6.75" Cone Height 7.75" Outside Diameter 6.5" Inside Diameter Tested Good Expedited shipping services are available upon request. All taxes due are ...

Stainless Steel 55 Gallon Drums

55 gallon drums - stainless steel 304. Approx 11 drums with reinforcing bands, and 10 drums without reinforcing band. Drums have lids. Specify which kind - priced by the drum (minimum order 3 drums). Quantity (2...

Generic Drawer Magnet USED

• Manufacturer: Generic

Inlet ID: 5 1/2 Outlet ID: 2 3/4 Flange: 7 x 7 Holes center-to-center: 6 x 6 Removed from: 750 Ton Engel Injection Molding Machine Model: ES 4400/750 Serial: 0454-750 Buyers are welcome to inspect equipme...

BUNTING Drawer Magnet Used

• Manufacturer: Bunting

TOP FLANGE: 7 1/2" X 7 1/2" TOP INLET HOLE DIAMETER: 4 1/4" BOTTOM FLANGE: 7 1/2" X 7 1/2" BOTTOM FLANGE INLET HOLE: 4 1/4" BOLT HOLES, CENTER TO CENTER: 6" Expedited shipping services are available upon req...

BUNTING Drawer Magnet Used

• Manufacturer: Bunting

TOP FLANGE: 7 1/2 X 7 1/2 TOP HOLE 4 1/4 BOTTOM FLANGE: 7 1/2 X 7 1/2 BOTTOM HOLE: 4 1/4 CENTER TO CENTER HOLE BOTTOM 6 INCH Expedited shipping services are available upon request. All taxes due are the res...

BUNTING 9063268-1-01 Drawer Magnet Used

• Manufacturer: Bunting

10" x 10" Top Flange 8" x 8" Holes Center to Center 4.25" x 4.25" Bottom Flange 3.25" x 3.25" Holes Center to Center 3" x 2" Top Opening 69 mm Outlet Inside Diameter Buyers are welcome to inspect equipment ...

CONAIR DB8 DustBeater Vacuum Loader USED

• Manufacturer: Conair
• Model: DB8

Self-Contained 200 lbs/hr Recommended Throughput 8" Loader Diameter 0.14 Cu Ft Loader Volume 80 PSI Compressed Air Requirement 50' Max Conveying Distance 1,5", 1.75", 2" Material/Vacuum Line Size Available ...

BUNTING MAGNETICS Drawer Magnet USED

• Manufacturer: Bunting

7.5" x 7.5" Top Flange 4.25" Diameter Top Flange Inlet / Outlet Approx. 1.5" Cone Height 1.25" Cylinder 7.5" x 7.5" Bottom Flange 3 7/8" Diameter Bottom Inlet / Outlet Flange 6" x 6" Center to Center Holes ...

BUNTING Drawer Magnet Used

• Manufacturer: Bunting

Top flange:6 1/4x6 1/4 Top center to center:3 1/4x5 Inlet:2 3/4 Bottom flange:4 3/4x6 Bottom center to center:3 1/4x5 Outlet:2 3/4 Buyers are welcome to inspect equipment prior to purchase. Expedited shipp...

BUNTING MAGNETICS 62493-2 Drawer Magnet USED

• Manufacturer: Bunting

108.62 mm Diameter Inlet / Outlet Top Flange 6" x 6.5" Top Flange 5" x 5" Center to Center Holes Top Flange 7.75" x 7.75" Bottom Flange 6.75" x 6.75" Center to Center Holes Bottom Flange 1.5" Cone Height 1....