Used Machine Tools in Nevada, USA

Baileigh Beveling Machine CM-6-1.0

• Manufacturer: Baileigh
• Model: CM-6-1.0

DESCRIPTION Looking to add a chamfered edge to sheet material without breaking the bank? Look no further than this plate beveler. 1.5 hp motor runs on 110-volt single-phase power. Puts up to 6mm chamfer on any ed...

Used Roto-Die Model 10 Hydraulic Press Brake Bender 10' x 16 GA MODEL: No. 10

• Manufacturer: Rotodie

Used Roto-Die Model 10 Hydraulic Press Brake Bender 10' x 16 GA MODEL: No. 10 SN: 82084 Capacity: 120" x 16 gauge GENERAL SPECIFICATIONS 10' x 16 Ga., ROTO-DIE, No. 10, Hydraulic, 10' O.A., 3" Stroke, 7-1/2" ...

Smith double vertical drive turning machine

Used Smith double vertical drive turning machine Works Great 7 Day return priv. Buyer pays all shipping

Lown G500 Roll Machine

• Manufacturer: Lown

Used Lown G500 Roll Machine 6" pinch plate roller Lowell brand 500 series 8ft long 208 volt power Weight approximately 3,095 LOWN G-500 Plate Bending and Slip Roll, used, in good working condition. Model G-500 by...

JET 350129 JMD-18PFN MILL/DRILL WITH NEWALL DP700 DRO AND X-AXIS TABLE POWERFEED

• Manufacturer: Newall

Details FEATURES: • For added safety, the JMD-18PFN follows strict guidelines and electrical requirements to be certified by CSA Group • One-piece cast iron column for added support • Belt cover with quick slide ...

Glass Master Duct Board Machine

Used Glass Master Duct Board Machine It does 1", 1.5" and 2" ductboard It can make the grooved liner for spiral pipe This machine has all the cutting knives for 1", 1.5" and 2" for the spiral duct liner. The kniv...

JET 350136 JMD-18PFN MILL/DRILL WITH NEWALL DP500 DRO AND X-AXIS TABLE POWERFEED

• Manufacturer: Newall

Details FEATURES: • For added safety, the JMD-18PFN follows strict guidelines and electrical requirements to be certified by CSA Group • One-piece cast iron column for added support • Belt cover with quick slide ...

METALpro MP4005 – 6 inch 3 in 1 Combination Shear

UL Listed & Approved for Sale in Canada The MP4005 is a 16 inch 3 in 1 combination shear. Capable of shearing flat bar, angle iron, rod, or square. The MP4005 is capable of shearing flat bar 3/8″ thick and materi...

METALpro MP5005 – 12 inch 3 in 1 Combination Shear

UL Listed & Approved for Sale in Canada The MP5005 is a 12 inch 3 in 1 combination shear. Capable of shearing flat bar, angle iron, rod, or square. The MP5005 is capable of shearing flat bar 3/8″ thick and materi...

RAMS-2013 S & Drive Machine

• Manufacturer: Rams

Capacity: 24 GA MAX on S Cleat - MILD STEEL22 GA MAX on Drive Cleat - MILD STEEL | Approx. speed: 30 FPM | Dimensions: 44" LONG x 18" WIDE x 34" HIGH | Approx. weight: 500 LBS

MITTLER BROS 48" ECONO RADIUS BRAKE

Our 48" Econo Radius Brake (#2800-4822RB) has many of the features you'd fine in a full size brake, but at a fraction of the cost! It mounts on an existing bench or table and has a material clamp to anchor your w...

Wilton SHR™ Strut & Threaded Rod Shear

• Manufacturer: Wilton

Experience the shear difference. The WILTON SHR™ is engineered to quickly cut strut, back-to-back strut, and threaded rod without the need for deburring or secondary operations. No mess and no spark mean increase...

Baileigh MPS-5 Throatless Shear

• Manufacturer: Baileigh
• Model: MPS-5

Do you need a large capacity from your throatless shear? If so then the MPS-5 from Baileigh Industrial is for you. This bench mounted shear has a mild steel capacity of 3/16". The throatless design of the MPS-5 s...

Baileigh Foot Shear SF-5216

• Manufacturer: Baileigh
• Model: SF-5216
• Shearing length: 1,320.8 millimeter

The SF-5216 stomp shear from Baileigh Industrial is unlike anything on the market. The fit and finish of the SF-5216 is unrivaled in the industry. This heavy duty manual shear is made in Taiwan and is capable of ...

Baileigh Radial Drill - RD-1000M

• Manufacturer: Baileigh
• Model: RD-1000M
• Column size: 238.76 millimeter

1.57" maximum drilling capacity Heavy duty construction Power down feed MT4 spindle 39.3" Reach 9.4" Column Box Shape Worktable

GMC GMM-1054 Milling Machine

• Manufacturer: GMC
• Model: GMM-1054

Good condition GMC GMM-1054 Milling Machines manufactured in 2013. Located in USA and other countries. Click request price for more information.