Used Machine Tools in Fukui, Japan

Kanetec KENT-4080A

• Manufacturer: Kent

There are two

Kanetec KET-1530B-M

• Manufacturer: カネテック

JAM DF-30

• Manufacturer: JAM

Maximum grinding wheel width: 40mm, minimum dressing width: 0.2mm, Maximum dressing length: 40mm, scale: 0.02mm/DIV, weight: 5.2kg

Nitto Koki EMB-0307C

• Manufacturer: Nitto

Power supply: AC100V 50/60Hz, rated power consumption: 900W, rated current: 9A, No-load speed: 12700min-1, chamfering capability: stainless steel: maximum 3...

1989 Shizuoka VHR-SD

• Manufacturer: Shizuoka
• Model: VHR-SD

Working surface dimensions: 1100×280, rotation speed: 20~4500 rpm, tool end hole taper: NST40, vertical travel distance: 140, spindle: 2.5KW, weight: 2100Kg

1995 Yamage MY-160S

• Manufacturer: 山毛

Maximum ram stroke: 160 mm, ram vertical adjustment distance: 200 mm, Table diameter: φ320 mm, table forward/backward travel: 320 mm, table left/right travel: 300 mm, weigh...

Urates RT-150A

• Manufacturer: ウラテツ

Stroke maximum: 150mm, table working area: 300φ, main unit jaw spacing: 300mm, table Y-axis travel: 170mm, ram vertical travel: 150mm, weight: 750kg

1986 Heiwa Kogyo Co.

• Manufacturer: 平和工業

100V

2004 Iwashita 2VB

• Manufacturer: イワシタ

Table dimensions: 1100×280, X700×Y300×Z400, spindle speed: 30～1800rpm, Required floor area: 2500×1880, machine height: 1960, machine weight: 3000kg

2012 OKK RRM-2V

• Manufacturer: OKK
• Model: RRM-2V

XYZ:720×300×450, Table working surface: 1310×300, spindle rotation speed: 60–1800 rpm, Machine height: 2410, required floor area: 2520×1700, machine weight: 3000kg

2005 Okuma FMV-30

• Manufacturer: オークマ

Table working surface: 1350×310, workpiece admissible mass: 300, Table travel: left-right around 710, around 320, up-down 410, spindle rotation speed: 25~2500, Machine height: 2165, required floor area: 1860...

1992宝 TK-50

• Manufacturer: 宝

T:450×800, table travel (Ikel):240, maximum workpiece height:200, minimum inner diameter of workpiece:8, machine floor area:1100×550, weight:350kg

2006 Okamoto PFG-500DXA II

• Manufacturer: 岡本
• Model: PFG-500

Dust collection, water supply, separator

2000 Wasino SE-64

• Manufacturer: Amada - Wasino
• Model: SE-64

Table working surface: 600×400, maximum table travel left/right: 750, Wheel/disk: 50Hz / outer diameter 355 × width 38 × inner diameter 127, speed: 1500, 60Hz / outer diameter 305 × width 38 × inner diamet...

1991 Nikko NFG-515-AD

• Manufacturer: 日興

Table work surface: 450×180, maximum table travel (left-right) 520 (front-back) 180, Table size: 600×140, grinding wheel spindle speed: 50Hz/2800, 60Hz/3400, Machine ...