Used Honing Machines

Trusted Seller
1990 SUNNEN MBC-1800 - G 1113-210007
- Manufacturer: Sunnen
Control type: conventional | Freight basis: FCA | Honing: mm | Hub: mm | Tip height: mm | Total power requirement: kW | Machine weight approx.: 1 t | Space requirement approx.: 2 x 2 x 2 m
Staufenberg, Germany
Trusted Seller
GEHRING P350-31P 1113-22432
- Manufacturer: Gehring
Control type: conventional | Freight basis: FCA | Honing: 4-31 mm | Hub: 350 mm | Discharge: 250 mm
Staufenberg, Germany
Trusted Seller
Honing machine
- Manufacturer: Barnesdril
including the table
Brno, Czech Republic
Trusted Seller
Longato KNIFE HONING
- Manufacturer: LONGATO GRINDING MACHINES
Honing stone to remove the burr from knife edge
Pesaro, Italy
Trusted Seller
2000 NAGEL SCD 200 1113-235072
- Manufacturer: Nagel
- Power requirement: 12 kilowatt
Until now, the machine has machined the parts in a line, i.e. without interruption. Piston rods are usually machined with a gap, for which it is necessary to place the finishing stone only when the part runs unde...
Staufenberg, Germany
Trusted Seller
Honing Machine GEHRING KSS 1200-190
- Manufacturer: Gehring
Vertical Honing Machine GEHRING KSS 1200-190, dia 20 x 1100, dia 190 x 1020, with equipment, available for immediate delivery Subject to Prior Sale
Italy
Trusted Seller
2013 SUPFINA 622/1 1113-215123
- Manufacturer: SUPFINA
Control type: CNC | Control name: Siemens 840D | Freight basis: FCA | Workpiece diameter: mm | Circumferential diameter: 80 mm | Workpiece length: 450 mm | Total power requirement: kvA | Machine weight approx.: ...
Staufenberg, Germany
Trusted Seller
Polishing Machine KEIN TYPENSCHILD
- Manufacturer: KEIN TYPENSCHILD
Disc right: Ø 150mm x W: 50mm; disc fitted with emery burrs Disk left: Ø 125mm x W: 50mm; disk equipped with emery burrs support on both sides Machine mounted on stand with base plate. Operation via on/off switch
Leipzig, Germany
Trusted Seller
1999 SUNNEN ML-3500 Ref No: 55991
- Manufacturer: Sunnen
including partial equipment Object: 55991 | Stroke max.: 170 mm | Stroke min.: 6 mm | Stroke rate (max.): 500 /min | Stroke rate (min.): 60 /min | Spindle speed from: 200 /min | .. to: 3000 /min | Mains ...
Niederhelfenschwil, Switzerland
Trusted Seller
1970 Polishing Machine KEIN TYPENSCHILD
- Manufacturer: KEIN TYPENSCHILD
- Power requirement: 2 kilowatt
Double Disc Grinding Machine - Its based on a molding machine body foundation as a whole. - application range: metal, wood, plastic - ginding disc surface diameter:680mm - grinding disc material: sand paper - suc...
Leipzig, Germany
1970 Nail HHM100/2.2-40
Voltage: 500V Capacity: 2.2-100 mm | Spindle speed: 400-3350 rpm | Expansion of the tool: 2,3 mm | Total expansion: 3,1 mm | Engine: 1,1 kW | Length: 1200 mm | Width: 800 mm | Height: 1200 mm | Weight: 500 kg
Värnamo, Sweden
Nail HHM 40
Work area: 2.5-70 mm | Spindle speed: 200-1600 rpm
Värnamo, Sweden
Peter Wolters 2U8
- Manufacturer: Peter Wolters
New timing relay, all bearings replaced. After that, the machine has only been test driven. Device for aut. supply of lip agent W45. Both the upper and lower disc as well as the height adjustment are motorized.
Värnamo, Sweden
Arboga EP308
- Manufacturer: Arboga
Wheel: 200x32x20 mm | Spindle speed: 2800 rpm | Length: 550 mm | Width: 600 mm | Height: 1170 mm | Weight: 130 kg
Värnamo, Sweden
Trusted Seller
2000 PEMAMO MDR 140 NC
- Manufacturer: PEMAMO
Used Machine tools for sale Spindle number: 1 | Honing range: Ø 1,5 - 50 [mm] | Honing stroke: 0 - 100 [mm] | Spindle speed: 150 - 2500 [Rpm] | Dimensions: 1550 x 800 x 1450 [mm]
Contamine-sur-Arve, France