Used Extruders

Trusted Seller
Werner & Pfleiderer Extruder Twin Screw ZSK-57-W50P
- Manufacturer: WP
Werner & Pfleiderer, Co-rotating twin screw, 57mm carbon steel compounding extruder with optional high torque drive rated at up to 350 kg per hour – depending on materials and application. L to D ratio 34:1 Equip...
Carol Stream, IL
Trusted Seller
1999 PTI pelletizing line with model TS4500 4.5″ 30:1 L/D extruder
- Manufacturer: PTI
1999 PTI pelletizing line with model TS4500 4.5″ 30:1 L/D extruder having an electrically heated, water cooled (closed loop), and side vented barrel at a nominal 42″ center-line height. The gearbox is a Flender m...
Elk Grove Village, IL
Trusted Seller
1960 4000 Ton Soutwark Extrusion Press #2160714
- Manufacturer: Southwark
SPECIFICATIONS: 4000 Ton Soutwark Extrusion Press * 4000 ton * Max billet size 12" x 38" * Die stack is 20" x 23.5" * Modern die shuffle * Oilgear pumps PVV200 * 300HP Motors * Hydraulics upgraded in 2010 (cost $...
Toledo, OH
Trusted Seller
54" Welex 5 Layer Extrusion Sheet Line
- Manufacturer: Welex
54" Welex 5 Layer Extrusion Sheet Line Used 54" Welex 5 layer sheet line consisting of the following: Mcguire blender feeder (1) 3.5" Welex extruder, 36:1 l/d, vent with dc motor and screen changer. (2) 2.5" W...
Cleveland, OH
Trusted Seller
1.5" Killion Extrusion Line
- Manufacturer: Killion
1.5" Killion Extrusion Line Used 1.5" Killion extruder, model KN-150, 24:1 l/d, electrically heated, air cooled barrel, jacketed feed section, 15 hp, 1750 rpm dc motor, 11.2:1 gearbox ratio, Cross head coating di...
Cleveland, OH
Trusted Seller
6" Gloucester Water Ring Pelletizing Line
- Manufacturer: Gloucester
6" Gloucester Water Ring Pelletizing Line Used 6" Gloucester water ring pelletizing line, with 6" Gloucester extruder, model 266-001, 30:1 L/D, air cooled with Contracool and blower, jacketed feed section, feed h...
Cleveland, OH
Trusted Seller
40 MM Cissco Machinery Strand Extrusion Line
- Manufacturer: Cissco Machinery Co.
40 MM Cissco Machinery Strand Extrusion Line Used 40 MM Cissco Machinery Co strand extrusion with 40 MM Cissco Machinery single screw extruder, model ABS 40/28, 28:1 L/D, air cooled barrel, jacketed feed section,...
Cleveland, OH
Trusted Seller
Zumbach Surface Fault Detector, Model KW20
- Manufacturer: Zumbach
Zumbach Surface Fault Detector, Model KW20 Used Zumbach surface fault detector, model KW20, 2.5" wide aperture with 2" wide opening with idler rollers, serial# 3072.1559.
Cleveland, OH
Trusted Seller
RDN Die Cutter, Model GCT
- Manufacturer: RDN
RDN Die Cutter, Model GCT Used RDN die cutter/guillotine, model GCT, " blade, 115 volts, serial# 31115-1, built 1993.
Cleveland, OH
Trusted Seller
Tinius-Olsen Extrusion Plastometer
- Manufacturer: Tinius-Olsen
Tinius-Olsen Extrusion Plastometer Used Tinius-Olsen extrusion plastometer, benchtop design, with heater and controls, serial# 172911-1.
Cleveland, OH
Trusted Seller
Zumbach Surface Fault Detector, Model KW20
- Manufacturer: Zumbach
Zumbach Surface Fault Detector, Model KW20 Used Zumbach surface fault detector, model KW20, 2.5" wide aperture with 2" wide opening with idler rollers, serial# 7142.0002.
Cleveland, OH
Trusted Seller
Zumbach Surface Fault Detector, Model KW20
- Manufacturer: Zumbach
Zumbach Surface Fault Detector, Model KW20 Used Zumbach surface fault detector, model KW20, 2.5" wide aperture with 2" wide opening with idler rollers, serial# 2709.1262.
Cleveland, OH
Trusted Seller
Zumbach Surface Fault Detector, Model KW20
- Manufacturer: Zumbach
Zumbach Surface Fault Detector, Model KW20 Used Zumbach surface fault detector, model KW20, 2.5" wide aperture with 2" wide opening with idler rollers, serial# 2795.1353.
Cleveland, OH
Trusted Seller
Weir Style Float Sink Tank, C/S
- Manufacturer: Weir
Weir Style Float Sink Tank, C/S Used Weir style float sink tank, carbon steel construction, approximately 110" x 100" x 72" deep x 65" cone bottom chamber, on legs with approximately 15' overall height.
Cleveland, OH
Trusted Seller
Weir Style Float Sink Tank, C/S
- Manufacturer: Weir
Weir Style Float Sink Tank, C/S Used Weir style float sink tank, carbon steel construction, approximatelyt 110" x 100" x 72" deep x 65" cone bottom chamber, on legs with approximately 15' overall height.
Cleveland, OH
W&H Filmex Extruder
- Manufacturer: W&H
- Model: Filmex
Good condition W&H Filmex Extruders available between 1993 and 2008 years. Located in Italy and other countries. Click request price for more information.
Italy