- Trusted Seller
2014 Cincinnati Milacron MTs 125
used
- Manufacturer: Cincinnati
Core Pull, Air Blast *Spec Sheet Available* Machine type: Injection Molding Machines | Machine location: Idaho | Stock #: 522179 | Clamping capacity: 125 Ton | Shot size: 7.6 Oz | Controller: Endura Touch Control...
- Trusted Seller
2021 Haitian ZEIII 4500/2250
used
- Manufacturer: Haitian
Features: Core Pull Air Blast Robot Interface Machine type: Injection Molding Machines | Machine location: Upon Request | Stock #: 837993 | Capacity: 506 Ton | Shot size: 51.92 oz | Tie bar spacing: 35.83″ x 35.8...
- Trusted Seller
2012 Arburg 720S 3200-1300
used
- Manufacturer: Arburg
- Model: 720S 3200-1300
EQUIPPED WITH : Core Pull Robot Interface Hydraulic Knockout
- Trusted Seller
2007 Arburg 570C 2000-800
used
- Manufacturer: Arburg
- Model: 570C 2000-800
Features: Core Pull Robot Interface USB Interface Extra Screw and Barrel Included
- Trusted Seller
2016 Krauss Maffei 300-1000CX
used
- Manufacturer: Krauss-Maffei
- Model: 300-1000CX
Features: Air Core Pull on Fixed Platen Blue Power EURO67 Robot Interface EURO73 Robot Interface for Side Entry Pneumatic Hot Runner Control Low Hours
- Trusted Seller
2023 600 Ton LS Mtron LSG-600H-i35a Injection Molding machine
used
- Manufacturer: LS Mtron
Available: 2023 600 Ton LS Mtron LSG-600H-i35a: US Tonnage: 606 Shot size: 60 Oz. Screw Diameter: 75 mm. Tie bar spacing: 36.6" x 36.1" Platen Size: 53.1" x 50.4" Max. Open daylight: 65" Control: KEBA 18.5...
Illinois, USA - Trusted Seller
2012 123 US Ton Nissei FNX110-12A Hybrid Injection Molding machine
used
- Manufacturer: Nissei
- Model: FNX110-12A
2012 123 US Ton Nissei FNX110-12AHybrid Injection Molding machine: Shot size: 5.3 Oz Screw size: 40 mm Screw type: GP screw. Note: You can choose the 40 mm (GP) or a 28 mm (Made in CPM). Only one screw can be...
Vermont, USA - Trusted Seller
2002 Van Dorn 500SP2800
used
- Manufacturer: Van Dorn Demag
Equipment Overview This 2002 Van Dorn Demag 500SP2800 is capable of consistent, high-volume PET preform or industrial molding. Its 1,676 g shot capacity significantly exceeds your 960 g requirement, and the large...
- Trusted Seller
2022 Tederic E328-E500C
used
- Manufacturer: Tederic
FEATURES Clamping Unit – SPI platens – High rigidity clamping unit with contactless tie bars – Mechanical and Electrical Safety – Heavy duty ball screw – Hydraulic ejector – 1 x hydraulic core pull – Oversized ad...
- Trusted Seller
2022 Tederic NEO E478-E500c
used
- Manufacturer: Tederic
FEATURES Clamping Unit – SPI platens – High rigidity clamping unit with contactless tie bars – Mechanical and Electrical Safety – Heavy duty ball screw – Hydraulic ejector – 1 x hydraulic core pull – Oversized ad...
2004 Autojector EV-200 7.58
used
- Manufacturer: Autojector
Size: 200 | Shot size: 12.08 | Clamp style: Vertical | Daylight: Max 25" | Core pull: Yes | Controls: Camac | Clamp type: Rotary | Table size: 58" | Injection orient: Horizontal | Voltage: 460/3/60 | – screw dia...
Valley City, OH
2005 Arburg 420C 800-250VU
used
- Manufacturer: Arburg
- Model: 420 C
Euromap Platens 35 mm screw Min Mold Height – 250mm Clamp Stroke- 500mm New screw & barrel New Heater Bands
Valley City, OH
2002 Husky HL1000 RS155/135
used
- Manufacturer: Husky
- Model: HL1000 RS155135
Size: 1100 | Shot size: 296 oz. | Clamp style: Hydraulic | Platen size: 81" x 71" | Dbtb: 61" x 52" | Daylight: Max 90.4" | Hko: Yes | Core pull: Yes | Controls: Polaris | Clamp type: Single Station | Max mold s...
Valley City, OH- Trusted Seller
2003 Victor VS180
used
- Manufacturer: Victor
This Victor VS180 was manufactured in 2003. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Contact us for more information about this machine. Core pull: 2 Air circuit: 1
Portugal - Trusted Seller
2003 Victor VS80
used
- Manufacturer: Victor
This Victor VS80 hydraulic injection moulding machine was manufactured in 2003. It is a robust and reliable choice for your production needs. Contact us for more information. Max. Opening stroke: 320 mm Centering...
Portugal
Tip: Enter manufacturer, model or keyword
