Used Processing in Wallonia, Belgium

Exhauster SOLYVENT- VENTEC, 46.800 m³/h, 48,5 kW

Type: DS100, serial number: 3-5-0861 Exhauster in good condition Motor 48,5 kW at 13 m³/s & 320 mm wc With a new substructure and a second-hand motor V-belt drive

Dust filter DEVAUZE, 3 000 m³ /h, filter surface 30 m²

Filter with 1 motor of 2,2 kW and the other one 5,5 kW In good condition With exhauster at the bottom With control cabinet With 9 vertical cartridges, cleaning by compressed air With some pipes and elbow joints C...

Exhauster for cupola furnace, 13020 m³/h

WERRA VENTILATOREN Type: R217/1750, serial number: 3423 Year of construction: 1975, weight: 1500 kg In very good condition Isolated, 10 cm glass wool all around

Fine dust filter DCE, 2000 m³/h

Type: C16- 2K5, serial number: 254583 With 4 filter elements, surface 16 m² With P control (electronic), electric command panel and air impuls cleaning

2005 Cartridge filter DCE - DONALDSON exhaust wall

• Manufacturer: Donaldson / Torit / DCE

Type: ECB-FM, serial number: 55040979 6 cartridges, Ø 320mm, h. 660mm With 2 drawers for recovery of dust With 2 connectors to measure the vacuum For cabines, silos, ... Without exhaust

500 mm x 300 mm x 105 mm,12 kg

Moulding box, 1250 mm x 710 mm x 300 mm, 156 kg

With trunions Bushes Ø 30 mm In very good condition

Casting ladle, ± 3,5 t aluminium, Ø 1640 mm, h. 1450 mm

Overhauled Outside: Ø 1640 mm, h. 1450 mm | Weight: 3000 kg

Exhauster SOLYVENT VENTEC, 18,5 Kw

Inlet Ø 240mm, outlet 310 x 160mm Direct transmission For dust

Exhauster, 58 m³/min, 600 daPa, 11 kW

• Manufacturer: Dapa

Type: RVR/S 06/58-30, serial number: 49362 Year of construction: 1981, weight: ± 800kg Motor LEROY SOMER, 11 kW, 380/660 V, 3000 rpm Performance by 20°C + density P 1,2 kg/m³ Inlet ø 250mm, outlet ø 210mm Drive 4...

Cyclone with filterwall LDP 1500-2000m³/h

1,5 kW, 220/380 V, 2810 rpm, 50 Hz, direct drive Cyclone separates heavy dust 4 filter panels 450 x 450mm With hand cleaning and 4 dustbuckets

Exhauster KELLER, 4500 m³/h, 3,3 kW

• Manufacturer: Keller

Ø input: 295 mm, Ø output: 350 mm Weight: ± 80 kg | Outside dimensions: 800 mm x 600 mm, h. 1160 mm | Useful height: ± 750 mm | Motor: AEG, type AM117M12E, 3,3 kW, 2800 rpm

Ventilator for masonry Ø 800 mm

Turns well Ø 800mm Weight: ± 40 kg | Outside dimensions: 1500 x 1500mm, h. 450mm | Power: ± 30 kW, 380/660 V

Electric annealing furnace 1000 x 410 x 300mm SMIT

• Manufacturer: Smit

With pneumatic cylinder and new electronic regulation Mit elektronischer Regelung

Ground compactor, Ø 1050 mm

1 compacting vibrating plat for bottoms lining of furnaces and bigger ladles Vibrating motor BOSCH, type 04008, 2850 rpm, 800 W, 220/380 V