Used Processing in Bremen, Germany

1850 liter heat-/coolable pressure tank, Ais304 with Stelzer propeller agitator

• Manufacturer: Apparatebau Nordhausen

max. allowable working temperature: 100 °C max. allowable working overpressure (dj): 6.0 bar max. allowable working temperature (dj): 100 °C Temperature control cylinder (dj): double jacket temperature control bo...

1500 liter heat-/ coolable pressure tank, Aisi304 with blade stirrer

• Manufacturer: ABAB Allgemeine Behälter- u. Apparate Bau

max. allowable working temperature: 145 °C max. allowable working overpressure (dj): 4.0 bar max. allowable working temperature (dj): 145 °C Temperature control cylinder (dj): double jacket

25000 Liter 22T6 ISO-tank container / heatable pressure tank, Stainless steel

max. allowable working temperature: 120 °C remarks: Includes modular heating system; can be cleaned from the inside for an additional charge

Stainless steel container 30 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on 4 feet, height-adjustable, with conical bottoms. Propeller agitator installed diagonally below the cylinder. Insulation around the cylinder and lower bottom, cover fully welded. C...

Stainless steel tank 147.5 cbm

• Manufacturer: Sielmann

Design: cylindrical standing on a concrete base with upper conical base and lower inwardly curved conical base. Propeller agitator in the cylinder at the bottom. Insulation around the cylinder, cover made of full...

Stainless steel tank 82.7 cbm

• Manufacturer: Sielmann

Design: cylindrical, upright with flat bottom and conical top. Agitator with stabilizing ring installed diagonally in the cylinder, 5.5 kW, 955 rpm. Connections: 1 manhole 340 x 440 mm in the cylinder, 1 x DN 80 ...

Stainless steel container 75 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on 8 feet, height-adjustable, with conical bottoms. Propeller agitator installed diagonally in the cylinder below, 8 kW, 960 rpm (supplied loose). Insulation around the cylinder and ...

Stainless steel container 50 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on a frame, with concrete support, with upper conical base and lower eccentric conical base. Insulation around the cylinder and upper base, welded stainless steel cover. Connections:...

Stainless steel container 50 cbm

• Manufacturer: Sielmann

Design: cylindrical, upright with lower inwardly curved conical base, concrete base and upper conical base. Propeller agitator installed diagonally in the cylinder below, 2.5 kW, 930 rpm. Insulation around the cy...

Stainless steel container 28 cbm

• Manufacturer: Sielmann

Design: cylindrical, upright with lower flat bottom, with 100 mm gradient to the outlet, concrete-supported, with upper conical bottom, propeller agitator installed diagonally in the cylinder, 2.5 kW, 930 rpm, in...

Stainless steel container 25 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on 4 feet, with bracing, with conical bottoms, paddle agitator from the top centered at 2.8/12.54 rpm, air insulation around the cylinder and lower base, welded stainless steel cover...

Agitator tank 12.8 cbm, insulated

• Manufacturer: Sielmann

Design: cylinder, standing on 4 feet, height-adjustable, with conical bottoms, propeller agitator installed diagonally in the cylinder, 0.55 kW, 950 rpm, with internal PE heating coils for heating with 3 bar hot ...

Agitator tank 12.5 cbm

• Manufacturer: Sielmann

Content: 12.5 cubic meters | Material: stainless steel | Material specification: V2A, 1.4301 weld seams ground inside | Diameter: 2400 mm | Cyl. height: 2500 mm | Height agitator: 400 mm | Upper floor: 400 mm | ...

Agitator tank 10.9 cbm, insulated

• Manufacturer: Sielmann

Version: cyl. Suspended on 3 brackets with a curved upper base and a 20° conical lower base. 4-way mixer with 2 blades each, without agitator lantern and drive. 125 mm thick insulation around the cylinder and low...

Stainless steel container 10 cbm

• Manufacturer: Sielmann

Design: cylindrical, lying on 6 feet, height-adjustable, with conical bottoms, propeller agitator on the upper crest line, approx. 1 kW, approx. 940 rpm. Connections: 1 Kiel manhole 600 x 800 mm on the upper cres...