Used Heat Exchangers in New Jersey, USA

Plate and Frame Heat Exchanger 50.8 m² (546.8 ft²) Stainless Steel 316 - IPP# 222335

• Manufacturer: Schmidt API heat transfer

Type: Plate heat exchanger (pre-heater) Plate material: 316L stainless steel (1.4404) pressure on both sides -5/6 bar @ 120 degrees C (91 & 89 liter) carbon steel pressure plates and frame, 316L stainless steel (...

AMBASSADOR HEAT TRANSFER CO.

• Manufacturer: AMBASSADOR HEAT TRANSFER CO.

Used Approximately 274 Square Foot Stainless Steel Shell/Tube Heat Exchanger Manufacturer: Ambassador Heat Transfer Co.

Shell and Tube Heat Exchanger 187.3 m² (2,016 ft²) Stainless Steel - IPP# 222861

• Manufacturer: Ravagnan S.p.A.

Type: Duplex SS tube, Duplex shell, CS head vertical heat exchanger ASTM A789 Duplex, SAF 2507 tubes 6mm thick SAF 2507 duplex SS Overall length: 9499 OAL Weight: 4995 KG

Spiral Heat Exchanger 8 m² (86.1 ft²) Stainless Steel 316 - IPP# 706516

• Manufacturer: Rosenblad

vertical spiral heat exchanger side A with pressure rating 6.5 kg/cm2, side B 5 kg/cm2

Shell and Tube Heat Exchanger 187.3 m² (2,016 ft²) Stainless Steel - IPP# 222860

• Manufacturer: Ravagnan S.p.A.

Duples stainless steel tube, shell and carbon steel head vertical heat exchanger Design pressure (tube side): 4.9 bar & vacuum @ 177 degrees C (1865 liter) Design pressure (shell side): 5.87 bar @ 60 degrees C (1...

Shell and Tube Heat Exchanger 99.8 m² (1,074 ft²) Stainless Steel 316L - IPP# 245626

• Manufacturer: Bronswerk Heat Transfer B.V

Shell and Tube Heat Exchanger 116.3 m² (1,252 ft²) Stainless Steel 321 - IPP# 220767

• Manufacturer: Heat Transfer Systems

TEMA 35-120 BEM Tube side inlet and outlet are 4", Shell side inlet is 12", shell outlet is 8" & 4"

Shell and Tube Heat Exchanger 5 m² (53.8 ft²) Incoloy 929 - IPP# 246437

Stainless Steel 304 Camden Copper Works Shell and Tube Heat Exchanger - IPP# 205968

• Manufacturer: Camden Copper Works

Carbon Steel Johnson Hunt LTD BEU Shell and Tube Heat Exchanger - IPP# 105543

• Manufacturer: Johnson

Shell and Tube Heat Exchanger 9.3 m² (100 ft²) Carbon Steel - IPP# 246764

Shell and Tube Heat Exchanger 65 m² (700 ft²) Stainless Steel - IPP# 232769

Shell and Tube Heat Exchanger 1,044 m² (11,238 ft²) Carbon Steel - IPP# 230154

• Manufacturer: Delta Tee International Inc.

Thermal capacity- 13,935,591 Btu/hr. 42" Outside diameter x 537 & 7/16" overall length Surface finish SSPC-SP10, Exterior paint per TransCanada spec., TES-COAT-P1 Design specs: Shell: Crude oil at 1984 GPM, Tubes...

Shell and Tube Heat Exchanger 1,044 m² (11,238 ft²) Carbon Steel - IPP# 230442

• Manufacturer: Delta Tee International Inc.

Thermal capacity- 13,935,591 Btu/hr. Surface finish SSPC-SP10, Exterior paint per TransCanada spec., TES-COAT-P1. Design specs: Shell: Crude oil at 1984 GPM, Tubes: Ammonia at 106761 #/hr. 42" Outside diameter x ...

Shell and Tube Heat Exchanger 1,044 m² (11,238 ft²) Carbon Steel - IPP# 230444

• Manufacturer: Delta Tee International Inc.

Thermal capacity- 13,935,591 Btu/hr. Surface finish SSPC-SP10, Exterior paint per TransCanada spec., TES-COAT-P1. Design specs: Shell: Crude oil at 1984 GPM, Tubes: Ammonia at 106761 #/hr. 42" Outside diameter x ...