Used reactors

VESSELS/REACTORS 105727

• Manufacturer: FABWELL CORP

REGENERATOR RECEIVER; MFG. BY FABWELL CORP. IN 2007; DIAMETER: 4'0" TOP; 2'8" BOTTOM; LENGTH: 6'0" TOP; 24'6" BOTTOM; 39'0" O.A.H.;

VESSELS/REACTORS 103626

• Manufacturer: ALLOY FAB

PURGE EVAPORATOR FEED TANK; MFG. BY ALLOY FAB; SADDLE SUPPORTS; NOZZLES: SHELL (2)1", 3", (3)4", 20" MANWAY, (2)6"; HEAD 1", (2)2";

VESSELS/REACTORS 54252

• Manufacturer: SUPERIOR WELDING

MFG. BY SUPERIOR WELDING; 46" CS SKIRT; Qty: 1 | V/h: V | Alloy: S | Gallons: 1128 | Shell psi: 26 | Agitated y/n: N | Full vac. y/n: Y | Shell material: 304SS | Length (ft'in"): 12'0" | Shell temp deg. f: 260 | ...

VESSELS/REACTORS 93406

• Manufacturer: PIERSOL PINE

SODA ASH MIX TANK; MFG. BY PIERSOL PINE; LUG SUPPORTS; WITH PANEL COIL JACKET ON BOTTOM HEAD; WITH INTERNAL SIDE BAFFLES;

VESSELS/REACTORS 92342

ANGLE MOUNTED LIGHTNIN MIXER STRAIGHT THROUGH DESIGN WITH APPROXIMATELY 3/4 HP 3/60/230/460 VOLT MOTOR; PACKING GLAND ON SHAFT, 3 BLADE PITCHED PADDLE TURBINE; OPENINGS INCLUDE: TOP (1)18" WITH HINGED COVER, (1)3...

VESSELS/REACTORS 91828

• Manufacturer: WALKER STAINLESS

MFG. BY WALKER STAINLESS; WITH CHEMINEER AGITATOR; WITH CLAMP ON JACKET ON BOTTOM 2' OF SHELL OD;

VESSELS/REACTORS 91772

• Manufacturer: ACME

MFG. BY ACME; ON LEGS WITH CASTERS; Qty: 1 | Alloy: S | Gallons: 20 | Dia/width (ft'in"): 1'4" | Length (ft'in"): 1'6" | Shell psi: 80 | Full vac. y/n: N | Shell temp deg. f: 325 | V/h: V | Shell material: 316SS ...

VESSELS/REACTORS 103884

• Manufacturer: BENDEL

STEAM DRUM PHASE; MFG. BY BENDEL IN 2000; NOZZLES: TOP 1", 1.5", (2)3", 6"; SHELL 1.5", (2)2", (2)3", 6", 20" MANWAY; BOTTOM 6";

VESSELS/REACTORS 103134

• Manufacturer: FABRICON

MFG BY FABRICON IN 1988; FILTRATE SEPARATOR; NOZZLES: TOP 16"; SIDE 24", 16", 4"; BOTTOM 10"; ON 4 LEGS;

VESSELS/REACTORS 102272

• Manufacturer: JACOB APPLIED TECHNOLOGY

MFG. BY JACOB APPLIED TECHNOLOGY IN 1997; NOZZLES: TOP (2)3", (3)2", (2)1.5"; SIDE 10"; BOTTOM 1.5" CBO; (4) LUG SUPPORTS;

VESSELS/REACTORS 101777

• Manufacturer: CURTIS KELLY

PRIMARY PURGE COLUMN; MFG. BY CURTIS KELLY IN 1992; LUG SUPPORTS;

VESSELS/REACTORS 104312

• Manufacturer: ROBEN

ACID STRIPPER SUCTION DRUM; MFG. BY ROBEN IN 1995; LEG SUPPORTS; NOZZLES: TOP 12"; SHELL 6", 20" MANWAY; BOTTOM 8";

VESSELS/REACTORS 100953

• Manufacturer: PAUL MUELLER

MFG. BY PAUL MUELLER; LEG SUPPORTS; NOZZLES: TOP (3)2", 18"; BOTTOM 2";

VESSELS/REACTORS 100715

• Manufacturer: HEBLER

SOLVENT EVAPORATOR SEPARATOR; MFG. BY HEBLER IN 1988; LUG RING SUPPORTS;

VESSELS/REACTORS 95784

• Manufacturer: SEMCO

MFG. BY SEMCO; ON LEGS; Qty: 1 | Alloy: S | Gallons: 290 | Dia/width (ft'in"): 2'6" | Length (ft'in"): 6'0" | Shell psi: 136 | Full vac. y/n: Y | Shell temp deg. f: 400 | V/h: V | Shell material: 304SS | Wall: .1...