Processing » Homogenizers » Colloid Mills

Search By Manufacturer

Search By Country

Building Filters

205

Used Colloid Mills

  • Trusted Seller
    GREERCO INLINE COLLOID MILL -

    GREERCO INLINE COLLOID MILL - S/S - MODEL W500V

    • Manufacturer: Greerco

    1 - used GREERCO Model W750H In-Line Colloid Mill, high shear mixer. Has stainless steel adjustable rotor/stator. Nominally rated 30-120 gpm depending on gap settings. The rotor-stator gap can be adjusted on-the-...

    USA
  • Trusted Seller
    UNUSED IKA WORKS MK 2000/50

    UNUSED IKA WORKS MK 2000/50 COLLOID MILL – 150 HP (#9720)

    • Manufacturer: IKA
    • Model: MK 200050

    Unused- IKA Works Inline Colloid Mill, Model MK 2000/50. Nominal flow rate 350 gallons per minute, maximum flow rate 60,000 l/h, nominal tip speed 23 meters per second. Driven by a 150hp, 3/60/460 volt, 1785 rpm ...

    USA
  • Trusted Seller
    UNUSED IKA WORKS MK 2000/50

    UNUSED IKA WORKS MK 2000/50 COLLOID MILL – 150 HP (#9719)

    • Manufacturer: IKA
    • Model: MK 200050

    Unused- IKA Works Inline Colloid Mill, Model MK 2000/50. Nominal flow rate 350 gallons per minute, maximum flow rate 60,000 l/h, nominal tip speed 23 meters per second. Driven by a 150hp, 3/60/460 volt, 1785 rpm ...

    USA
  • Trusted Seller
    LEUMANN AND UHLMANN VERTICAL COLLOID

    LEUMANN AND UHLMANN VERTICAL COLLOID MILL MODEL D 112 MS

    • Manufacturer: Uhlmann

    LEUMANN AND UHLMANN VERTICAL TOOTHED COLLOID MILL - TYPE (MODEL) D 112 MS - FEATURES ALL 316 STAINLESS STEEL CONTACT SURFACES WITH THREE STAGE (COURSE, MEDIUM, FINE) TOOTHED ROTOR AND STATOR IN HARDENED CHROME S...

    USA
  • Trusted Seller
    GREERCO VERTICAL COLLOID MILL -

    GREERCO VERTICAL COLLOID MILL - MODEL W-250-V - ALL S/S

    • Manufacturer: Greerco

    USED GREERCO COLLOID MILL - SANITARY - Model W-250-V - Vertical Design - All Sanitary Stainless Steel Pharmaceutical Grade Wetted Parts - Central Feed Hopper 8" dia. x 6" straight side with cone bottom and 9.5" ...

    USA
  • Trusted Seller
    BEMATEK COLLOID MILL - S/S

    BEMATEK COLLOID MILL - S/S - 10 HP

    • Manufacturer: Bematek

    1 - used Bematek Colloid Mill, model CZ-260-PB-10. Stainless steel inline colloid mill/high shear mixer. 2" inlet/outlet. Driven by stainless washdown 10 HP, 208-230/460V, 3500 RPM with 230 volt AC inverter. Last...

    USA
  • Trusted Seller
    GREERCO INLINE COLLOID MILL -

    GREERCO INLINE COLLOID MILL - S/S - MODEL W750V

    • Manufacturer: Greerco

    1 - used GREERCO Model W750V In-Line Colloid Mill, high shear mixer. Has stainless steel adjustable rotor/stator. Nominally rated 30-120 gpm depending on gap settings. The rotor-stator gap can be adjusted on-the-...

    USA
  • Trusted Seller
    GREERCO NO MODEL STAINLESS STEEL

    GREERCO NO MODEL STAINLESS STEEL

    • Manufacturer: Greerco

    GREERCO NO MODEL VERTICAL COLLOID MILL, STAINLESS STEEL ROTOR 4" DIAMETER, 7.5 HP, 220-440 V, 3Ph, 2350 R.P.PM., MACHINE DIMENSIONS 16" DIAMETER X 28" HEIGHT

    Mexico
  • Trusted Seller
    Colomar colloidal vertical colloid mill

    Colomar colloidal vertical colloid mill

    • Manufacturer: Colomar

    Colomar colloidal vertical colloid mill -Stainless steel rotor 2" diameter -Missing adjusting and hopper -3 HP, 3 phases, 60 cycles, 220-440 volts motor.

    Mexico
  • Trusted Seller
    Fryma stainless steel colloid mill

    Fryma stainless steel colloid mill

    • Manufacturer: Fryma

    -3” diameter stainless steel rotor -Missing stainless steel hopper -Mounted on base with wheels -1 HP, 3 Phase, 60 cycles, 230 volt motor

    Mexico
  • Trusted Seller
    PREMIER JACKETED COLLOID MILL

    PREMIER JACKETED COLLOID MILL

    • Manufacturer: Premier

    PREMIER JACKETED COLLOID MILL , WITH STAINLESS STEEL IMPELLER AND HOPPER, 6" DIAMETER, GRINDING ADJUSTMENTS, 10 HP, 220-440 V, 3 Ph, 1750 R.P.M., COLLOID MILL DIMENSIONS, 25" LONG X 20" WIDTH X 70" HEIGHT

    Mexico
  • Trusted Seller
    Probst & Class model UV14

    Probst & Class model UV14 stainless steel colloid mill

    • Manufacturer: Probst

    Probst & Class model UV14 stainless steel colloid mill - 2” diameter stainless steel rotor - Stainless steel hopper - 3/4” discharge - Mounted on base with casters - 2 HP, 3 Phase, 60 Hz, 220 volt motor - Serial ...

    Mexico
  • Trusted Seller
    Mill, Colloid, Charlotte, Mdl SD20,

    Mill, Colloid, Charlotte, Mdl SD20, S/st, 25 HP, #C735720

    • Manufacturer: Goulds

    Charlotte stainless steel colloid mill, model SD20 is capable of rates from 300 to 600 gallons per hour. Depends on the viscosity. Mill is jacketed for heating or cooling. 2" diameter tri-clamp sanitary inlet/out...

    San Dimas, CA
  • Trusted Seller
    Mill, Colloid, Premier, Mdl 3UB7,

    Mill, Colloid, Premier, Mdl 3UB7, S/st #S739425

    • Manufacturer: Premier

    Premier stainless steel upright colloid mill, model 3UB7. Unit is rated for 30 gpm, manually operated stator/rotor gap adjustor, stator head is jacketed for cooling, 1" inlet and 1" outlet, driven by 5 hp, 208/22...

    San Dimas, CA
  • Trusted Seller
    Mill, Colloid, Type LA, S/st,

    Mill, Colloid, Type LA, S/st, Patterson, 5 HP, Pump #S742198

    • Manufacturer: Patterson

    Patterson Industries colloid mill, size 4TH, type LA, stainless steel. Jacketed bolt on front cover, approx. 6" diameter grooved rotor with stator, 1-1/2" diameter inlet/outlet. Driven by 5 hp, 3/60/208/220 volt,...

    San Dimas, CA
45678

Overview

Colloid mills are specialized machines used for the reduction of particle size and the homogenization of products in various industries, such as food, pharmaceuticals, and cosmetics. These mills use high-speed rotors to create shear forces that break down particles, resulting in a uniform and fine mixture. They are essential for applications requiring emulsification, dispersion, and grinding of materials.

FAQ

What should I consider when buying a used colloid mill?

Check the mill's overall condition, including the rotor and stator. Verify the machine's capacity and compatibility with your specific application. Review maintenance records and ensure all parts are functional.

How do I ensure the colloid mill is shipped safely to my location?

Use a reputable transport service that specializes in heavy machinery. Make sure the mill is properly secured and protected during transit to prevent any damage.

What is the maintenance schedule for a colloid mill?

Regular maintenance includes checking for wear on the rotor and stator, lubricating moving parts, and inspecting seals and gaskets. Consult the manufacturer’s manual for detailed maintenance intervals and procedures.