Used Processing in Connecticut, USA

SLOT Furnace, 8'x10'x8'(H)

SLOT Furnace, 8'x10'x8'(H)

SLOT Furnace, 8'x10'x8'(H)

SLOT Furnace, 8'x10'x8'(H)

GRIEVE INERT ATMOSPHERE IB-550

• Manufacturer: Grieve
• Model: IB-550

SINGLE SIDE SWING DOOR WITH PRESSURE LATCHES AND STAINLESS STEEL INTERIOR. HEATING ELEMENTS AND CIRCULATING FAN ARE IN A PROTECTED CHAMBER BEHIND WORK AREA. HE...

18"W. x 10'L., Linova, Linova magnetic conveyor 18" wide x 10 ' long inclined

LINOVA MAGNETICS CONVEYOR Model No. B-20 Serial No. 61076 18 inch X 10 feet 50” High Inclined 45 Degrees Magnetic Gear-head motor 3 Phase Shown under power

MTA HEF 018

• Manufacturer: MTA

MTA PureTec Air Compressor Pre-Filters, HEF 018, P & M Series Tandem In-Line Filters, 232 Max. PSI, 117 SCFM Air Flow

BINKS BWH-10268-G

• Manufacturer: Binks

DOUBLE DOOR FRONT OPENING. HEAT, WHICH IS SUPPLIED BY A PACKAGE BURNER (800,000 BTU/HR MAX) FIRING INTO A ROOF MOUNTED CHAMBER, ENTERS WORK AREA VIA DUCT WORK O...

STEELMAN 666GTC-HT

• Manufacturer: Steelman

DOUBLE DOOR OPENING WITH PRESSURE LATCHES. HEAT IS SUPPLIED BY GAS BURNER (500,000 BTU/HR MAX) FIRING INTO REAR COMBUSTION CHAMBER. HEATED AIR ENTERS WORK AREA ...

GM ENTERPRISES GM HVF 201-M

• Manufacturer: GM ENTERPRISES

DOUBLE WALL HORIZONTAL LOAD WATER COOLED SHELL WITH LOCKING RING FRONT DOOR FOR 10 BAR OPERATION. INTERIOR HAS A MOLY HOT ZONE AND HEATING ELEMENTS. PUMPING SYSTEM INCLUDES MECHANICAL AND DIFFISION VACUUM PUMPS...

NOBLE INDUSTRIAL FURNACE

• Manufacturer: Noble

DIRECT GAS FIRED (2,400,000 BTU/HR MAX) CAR BOTTOM FURNACE WITH FRONT DOOR ATTACHED TO THE ROLL OUT CAR. INTERIOR IS LINED WITH LIGHT WEIGHT FIBER INSULATION. HEAT IS SUPPLIED BY (8) BURN...

CI HAYES VMHT/R-24-24-36

• Manufacturer: CI HAYES

HORIZONTAL WATER COOLED FRONT LOAD CHAMBER WITH SLIDING FRONT DOOR. INTERNAL HAS COIL TYPE HEATING ELEMENTS AND REAR MOUNTED FAN. FURNACE IS MISSING A STOKES 212 (150 CFM) VACUUM PUMPS.

LINDBERG HD-243618-CUA

• Manufacturer: Lindberg

ELECTRIC ATMOSPHERE BOX FURNACE WITH VERTICAL LIFT AIR OPERATED FRONT DOOR. HEATING ELEMENTS ARE ON BOTH SIDE WALLS, REAR WALL AND DOOR,. EQUIPPED WITH (3) GAS FLOSCOPES (ENDOTHERMIC, NATURAL GAS & AIR) AND ATMO...

SURFACE COMBUSTION

• Manufacturer: SURFACE COMBUSTION

Size i.d.: 30"W x 48"L x 30"H

THERMAL INNOVATIONS

• Manufacturer: THERMAL INNOVATIONS

DOUBLE DOOR OPENING AT FRONT AND REAR. SYSTEM WAS DESIGNED TO DRY 5" ALUMINUM WEB @ 1.5 TO 15 FPM USING IR ( THREE ZONES RATED 3 KW EACH) AND CONVECTION ( ONE ZONE RATED 18 KW) WITH 3 HP FAN THAT FEEDS NOZZLES ON...

DESPATCH V-31SD

• Manufacturer: Despatch

DOUBLE DOOR OPRNING WITH PRESSURE TYPE LATCHES. HEATING ELEMENTS AND CIRCULATING FAN ARE MOUNTED BELOW WORK AREA IN A PROTECTED CHAMBER. HEATED AIR IS CIRCULATED HORIZONTALLY.

JACKSON OVEN CO

• Manufacturer: JACKSON OVEN CO

DOUBLE DOOR OPENING WITH POSITIVE LATCHING AND PRESSURE RELIEF PANELS IN ROOF. INTERIOR WALLS ROOF AND DOORS ARE LINED WITH LIGHT WEIGHT FIBER REFRACTORY. FLOOR IS A POURED CASTABLE REFRACTORY WITH CART TRACKS. P...