NoiseCom UFX7110
used
- Manufacturer: Noise/COM
- Model: UFX7110
Programmable Noise Generator, 100Hz-1.5GHz 1: Type N(f) Output Connector | 11: Adds RS232, R422, & R423 interfaces in addition to IEEE-488 | 10: 230 vac 50 Hz Line Power | 14: Special Frequency Range (consult Fac...
$2,995 USDFarmingdale, NJ
Anritsu MP1763B
used
- Manufacturer: Anritsu
- Model: MP1763B
The MP1763B is used in combination with the MP1764A Error Detector. The amplitude of the clock and data signals can be varied from 0.25 to 2 V p-p while the offset can be adjusted to within ±2 V so that the ampli...
$787 USDFarmingdale, NJ
NoiseCom UFX7124
used
- Manufacturer: Noise/COM
- Model: UFX7124
Programmable Noise Generator, 2 to 4GHz Cal: Calibration Available | As-is: Unit Sold AS-IS
$3,413 USDFarmingdale, NJ
Tektronix AFG1062^
new
- Manufacturer: Tektronix
- Model: AFG1062
The AFG1062 Arbitrary Function Generator provides a waveform generation tool with the best price performance ratio. It includes dual channels, up to 60 MHz bandwidth and up to 10 Vp-p output amplitude. The four r...
$1,334 USDFarmingdale, NJ
Micronetics ANG5250
used
- Manufacturer: Micronetics
Noise Generator, 100 Hz - 1.5 GHz Frequency 100 Hz - 1.5 GHz Flatness dB p-p 5.0 dB RF output (dBm/Hz) -82 Power (dBm) + 10
$1,045 USDFarmingdale, NJ
Anritsu MP1601A
used
- Manufacturer: Anritsu
- Model: MP1601A
50 Hz to 5 GHz Pulse Pattern Generator Cal: Calibration Available | As-is: Unit Sold AS-IS
$4,235 USDFarmingdale, NJ
Tektronix 73A-270
used
- Manufacturer: Tektronix
- Model: 73A-270
The 73A-270 Arbitrary Pulse/Pattern Generator (APPG) Module is a printed circuit board assembly for use in a card cage conforming to the VXIbus specification, such as the 73A-021 used in the CDS 73A IAC System. T...
Farmingdale, NJ
NoiseCom NC346A
used
- Manufacturer: Noise/COM
- Model: NC346A
Noise Source .01 to 18 GHz As-is: Unit Sold AS-IS | Cal: Calibration Available
$1,523 USDFarmingdale, NJ
NoiseCom NC6110
used
- Manufacturer: Noise/COM
- Model: NC6110
Noise Generator, 100Hz to 1.5GHz 2: 110 dB attenuator in 1 dB steps (two attenuators | 4: Combiner for input signal | 6: 19 in. rack mountable unit, 17 in. wide by 3.5 in. high by 13 in. deep | 8: BNC female outp...
$2,993 USDFarmingdale, NJ
NoiseCom NC6107
used
- Manufacturer: Noise/COM
- Model: NC6107
Noise Generator, 100Hz to 100MHz 7: N (f) Output Connector | 9: 75 Ohm Output Impedance (-6dB loss) | 1: 100dB Attenuator in 10dB steps. | 3: 230VAC Input Power | 6: 19in Rack Moutable Unit | 8: BNC (f) Output Co...
$1,495 USDFarmingdale, NJ
NoiseCom UFX-BER 892-1850-3
used
- Manufacturer: Noise/COM
Options: 3- 50ohm input and output impedance 3: 50ohm input and output impedance | Cal: Calibration Available | As-is: Unit Sold AS-IS
$3,880 USDFarmingdale, NJ
$2,048 USDFarmingdale, NJ
Tektronix 8010-DTB-CT^
new
- Manufacturer: Tektronix
The Model 8010-DTB-CT Curve Tracer Test Board is used to allow the use of Tektronix curve tracer test modules with the Model 8010 High Power Device Test Fixture. For device connection and measurement consideratio...
$1,187 USDFarmingdale, NJ
Tektronix PPG1601^
new
- Manufacturer: Tektronix
- Model: PPG1601
The Tektronix PatternPro series programmable pattern generators provide up to four channels of stressed pattern generation for high-speed Datacom testing. The Tektronix PatternPro® line of high-performance patter...
Tektronix PPG3201^
new
- Manufacturer: Tektronix
- Model: PPG3201
The Tektronix PatternPro series programmable pattern generators provide up to four channels of stressed pattern generation for high-speed Datacom testing. The Tektronix PatternPro line of high-performance pattern...
Tip: Enter manufacturer, model or keyword