Used test instrumente in Saxony, Germany

HOMMEL gauge block set

• Manufacturer: Hommel

Gauge block set, gauge blocks, reference standard HOMMEL WERKE Type IV 4 Gen. 2 46 parts in wooden box used, tested !

WGN precision reading device

• Manufacturer: Pagus

Precision reading device, illuminated measuring device for length displays WGN 103551 fixing pin: Ø 20 mm, length: 35 mm used, tested !

FEINMESS. SUHL thread measuring screw

Thread micrometer, thread micrometer FEINMESSZEUGFABRIK SUHL TGL15046/I 12 pairs of inserts M 1.25 - M 6 in wooden case used, tested !

HOLEX workbench with tool wall

Workbench with tool wall HOLEX edition without shelf without Shelf 1x shelf: 1850 x 300 mm, height above worktop: 320 mm used, tested !

CARL ZEISS thread measuring screw

• Manufacturer: Zeiss

Thread measuring screw, thread micrometer, thread screw gauge with fine gauge CARL ZEISS M 0.6 - M 10 Measuring tip M 0.4 - 0.6 missing ! with protective case used, tested !

SOMET tool presetter

• Manufacturer: Somet

Tool presetter SOMET SPS 200 U Measuring unit from OFD Feinmess Dresden x=144.525 setting values y= 248,7 Angle measuring system meopt. PMP 100 from 0-180 on base frame used, tested !

MASSI calipers

Calipers, workshop calipers MASSI 0 - 1000 mm DIN 862 mm - scale fixed beak can be extended by 150 mm for inside and outside measurement with fine adjustment used, tested !

BRUNNER digital position indicator

• Manufacturer: Brunner

Digital position indicator, 1 - axis BRUNNER ELECTRONICS RPU 80 308.2.121 5 digits 110 / 220 V 50 Hz approx. 1.7 m mains cable approx. 3.0 m measuring cable used, tested !

PAGUS alignment plate with base cabinet

• Manufacturer: Pagus

Straightening plate, straightening table, with base cabinet PAGUS 890 x 890 mm Base cabinet: width: 800 mm, depth: 600 mm, height: 630 mm 2 doors: Door opening: width: 300 mm, height: 550 mm 2 drawers: width: 270...

FEINMESS. SUHL thread measuring screw

Thread micrometer, thread micrometer FINE MEASURING TOOL FACTORY SUHL FR. KEILPART & CO. SUHL DIN 863/1 6 pairs of inserts M 0.4 - M 7.5 10 insert pairs Whitworth thread W 1 - W 10 one measuring insert W 6 is mis...

PAGUS final dimensions

• Manufacturer: Pagus

Gauge blocks, reference standard PAGUS 6.875 - 9.975 mm 101 parts 44 Additional parts: 1x 1.001 / 3x 1.005 / 1x 1.02 / 2x 1.05 / 2x 1.07 / 1x 1.1 mm 2x 1.15 / 4x 1.2 / 2x 1.25 / 5x 1.3 / 1x 3.0 / 1x 6.5 mm 11x 7....

ORION vice

Vice ORION 125 used, tested ! Back wide: 125 mm | Back height: 80 mm | Kijk op: 200 mm | Height above workbench: 160 mm | Dimensions: 440 x 220 ( 280 ) x 200 mm

ADAMEHL electronic micrometer

electronic micrometer, micrometer ADAMEHL - LHOMARGY MI.21 used, tested !

power

Alignment plate, with frame WMW With lamp ! used, tested !

PAGUS alignment plate

• Manufacturer: Pagus

Straightening plate, straightening table PAGUS used, tested !