Used test instrumente in Dublin, Ireland

Haefely ECOUPLER 4

• Manufacturer: Haefely

Details The Haefely Ecoupler-4 is a coupling/decoupling network engineered for surge and EFT/Burst testing. It ensures precise disturbance injection into equipment under test while safeguarding auxiliary devices....

Haefely ECOMPACT 4

• Manufacturer: Haefely

Details The Haefely Ecompact-4 is a compact EMC immunity test generator optimized for surge and EFT/Burst testing. It complies with IEC/EN 61000-4-4 and 61000-4-5 standards, ensuring accurate pre-compliance and c...

Marconi IFR Aeroflex 500A

• Manufacturer: Aeroflex

Details The Marconi IFR Aeroflex 500A Communications Service Monitor integrates FM and AM signal generators with a sensitive 2 mV receiver, enabling AM, FM, and SSB testing. It includes a 0.2 ppm TCXO for precisi...

Teseq LE4070

• Manufacturer: Teseq - Schaffner

Details The Teseq LE4070 RF Cable Set For NSG 4070 is designed for seamless compatibility with the NSG 4070 system, delivering reliable RF signal transmission with minimal loss. Built from high-quality materials,...

Solar 7399-3

Details The Solar 7399-3 Transient Generator delivers precise surge and transient waveforms for EMC compliance testing. Engineered to evaluate electronic equipment immunity against voltage spikes, it ensures cons...

Teseq (Schaffner) NSG 5500

• Manufacturer: Teseq - Schaffner

Details The Teseq Schaffner NSG-5500 is a modular pulse generator engineered for advanced automotive EMC testing. It supports a wide range of transient simulations including load dump pulses, with programmable am...

Schaffner NSG 223A

• Manufacturer: Teseq - Schaffner

Details The Schaffner NSG 223A module is designed to generate high-energy pulses typical of those caused by switching inductive and capacitive loads or lightning strikes. It delivers pulses up to 2 Joules, availa...

Schaffner NSG 223

• Manufacturer: Teseq - Schaffner

Details The Teseq Schaffner NSG223 Interference Generator Plug‑In delivers high‑energy pulses to simulate destructive transients such as switching inductive loads or lightning surges. It can superpose symmetrical...

Schloder SESD230

Details The Schloder SESD230 ESD Simulator delivers up to 30kV in both air and contact discharge modes, complying with IEC 61000-4-2 standards (150 pF / 330 Ohm network). It supports single or repeated pulse mode...

Schloder SESD200

Details The Schloder SESD200 ESD Simulator delivers precision electrostatic discharge testing with output voltages up to 16.5kV in air and 9kV in contact mode. It offers single pulse or repeated operation, a pre-...

Rohde & Schwarz ESW8

• Manufacturer: Rohde & Schwarz
• Model: ESW8

Details The Rohde and Schwarz ESW8 is an advanced EMI test receiver supporting frequencies from 2 Hz to 8 GHz, delivering exceptional RF characteristics and fast measurement speed. It complies with CISPR16-1-1, A...

Teseq (Schaffner) NSG437

• Manufacturer: Teseq - Schaffner

Details The Teseq Schaffner NSG437 ESD simulator delivers precise air and contact discharge testing up to 30 kV, ensuring compliance with IEC/EN 61000-4-2, ISO 10605, and other standards. Featuring a touch panel ...

Schaffner NSG3025

• Manufacturer: Teseq - Schaffner

Details The Schaffner NSG3025 Burst Generator offers a pulse amplitude range from 200V to 4.8kV ±10% (open circuit), with burst frequency adjustable between 0.1kHz and 1MHz ±2%. It supports 1 to 255 spikes per pa...

Schaffner NSG222A

• Manufacturer: Teseq - Schaffner

Details The Schaffner NSG222A Pulse Interference Simulator delivers precision testing with 5ns/100ns pulse forms, featuring a built-in coupling network for symmetrical and asymmetrical pulse injection on mains co...

Haefely PIM120

• Manufacturer: Haefely

Details The Haefely PIM120 is a precision impulse current generator designed for component and material testing. It delivers controlled, high-current pulses that ensure durability verification and compliance with...