Used srs

GETECHA SRS 100

• Manufacturer: Getecha
• Model: SRS 100

Used horizontal cutting mill by Getecha (Germany) type SRS 100 A1.10. Mill has two feeding inlets, each with diameter 40 mm. Milling chamber is designed in stainless steel and has internal diameter 100 mm x lengt...

GETECHA SRS 100 A2

• Manufacturer: Getecha

Used horizontal cutting mill by Getecha (Germany) type SRS 100 A2. Mill has feeding inlet with diameter 50 mm. Milling chamber is designed in stainless steel and has internal diameter 100 mm x length 100 mm. Roto...

Nelmore SR44 20HP

• Manufacturer: Nelmore

The Nelmore SR44 20HP Granulator is a reliable piece of recycling and trash equipment suitable for various granulating tasks. This used model is equipped with features that enhance its operational efficiency, inc...

1 HP FBE Bi-Cutter Screenless Granulator (2006)

• Manufacturer: SRS Corp.

Model: SR1013 | Horsepower: 1 HP | Cutter chamber: (4) "S" Shaped Cutters | Cutter: 6 x 6 mm | Hopper dimensions: 16.375" x 16.375" x 30" | Power: 230V, 3.2 Amp | Includes: Hopper Magnet, Low Speed, Beside-the-P...

6" x 11" Rapid Granulator, Model 611 SR, 3 HP

• Manufacturer: Rapid
• Model: 611SR

Used 6" x 11" Rapid Granulator, Model 611 SR, 3 HP 16 Fly Knives 2 Bed Knives Staggered Rotor Top Feed, 52" Feed Height 1/8" Screen Size Bin Discharge 2" Airveyor Output Mounted On Casters Approximate Machine Dim...

6" x 11" Rapid Granulator, Model 611 SR, 3 HP

• Manufacturer: Rapid
• Model: 611SR

Used 6" x 11" Rapid Granulator, Model 611 SR, 3 HP 16 Fly Knives 2 Bed Knives Staggered Rotor Top Feed, 52" Feed Height 1/8" Screen Size Bin Discharge 2" Airveyor Output Mounted On Casters Approximate Machine Dim...

Suction Tube for Screenless Granulator

• Manufacturer: SRS

Palm Tree # LR-0000-11082019LR-54 Pic# 11042019 Bid with Confidence on this item, check our feedback!!! * All information deemed accurate but may vary from model to model. Contact Larry for any questions you ...

RAPID 3 HP Grinder / Granulator 611-SR USED

• Manufacturer: Rapid
• Model: 611-SR

Throat Size: 7" x 11" Screen 3/16" Holes 3 HP w/ Siemens Motor 230/400 Volt 50 Hz 940 RPM Powered on, tested good Expedited shipping services are available This piece is located at Ideal Machinery, Inc. on our ...

RAPID 5 HP Grinder / Granulator 611-SR 5 HP Used

• Manufacturer: Rapid

7" x 10.5" Throat Size 5 HP 7/32" Screen Hole Size Year: 1995 with Baldor Motor 5 HP (3.7 kw) 1725 RPM D112M Frame 208-230/460 Volt 3 Phase 60 Hz 15-13.2/6.6 Amp Tested Good Expedited shipping services are ava...

Granulator/Disintegrator Pulverizer 110 kW (147.5 HP) Carbon Steel - IPP# 705577

• Manufacturer: Pallman

Type PS8-12/6 granulation system 800mm diameter x 1200mm long rotor with 6 removable blades, 6 removable stator knives. Rotor speed 315RPM. With (2) access doors 1280 mm x 650 mm Rotor speed 340 rpm. Feed 1300 mm...

1998 KURTZ SR 171

• Manufacturer: KURTZ

Insert approx. 230 x 500 mm mobile Plastic shredder, plastic garanulator, hammer mill, laboratory mill, side mill used. Drive motor 2.2 kW 400 V The granulators were used for plastic recycling. Subject to changes...

2020 Changshu Shouyu Copper Wire Granulator

All electric motors are US 480V & 60Hz 2020 Changshu Shouyu Copper Wire Granulator Copper Granulator consists of the following: PDL10050 40 in. x 16 ft feed conveyor w/1.5 kw motor SR750 single shaft primary shre...