Used feed rolls

GRANULATOR FEED ROLLS 6929

Used granulator feed rolls. 41.5″ wide x 4.5″ knurled steel feed rolls powered by a 2HP 1,750 RPM 230V/460V motor into a 15:1 gearbox. Rolls are chain and sprocket driven.

UN RAPID 400-45 FEED ROLL 18806

Unused 2013 model year Rapid model 400-45 granulator. S/N RA-640.158469.10.1. 14″ x 18″ feed throat. 5 knife rotor with 3 bed knives which are in the 1st, 2nd, and 5th position. Tangential cutting chamber. 15 HP ...

CUMBERLAND 1456i GRANULATOR W/FEED ROLLS 18718

• Manufacturer: Cumberland

One (1) used Cumberland model 1456i granulator. S/N 8400-81004. 14″ x 56″ feed throat. Three (3) knife twin shear rotor with two (2) bed knifes. Rotor is belt driven by a 75 HP motor. 68″ wide in feed pull rolls ...

HERBOLD SMS45/160-H5-2 FEED ROLL GRANULATOR 16612

• Manufacturer: Herbold

Herbold model SMS45/160H5, two (2 granulators, S/N 3696 (x2). 23.5″ x 61″ feed throat, belt driven 5 knife open rotor, 2 bed knife, 100HP 230/460V motor. . there is a 11-3/4″ x 30″ parts chute granulator chamber ...

GRANUTEC TFG810-10 FEED ROLL GRANULATOR 17391

Granutec model TFG810-10 granulator, S/N 0109.4765, 8″ x 10″ feed throat, 3 knife rotor, 2 bed knife, 10 HP 460-volt motor, rear 10″ wide smooth steel feed roll in-feed powered by a 1/2 HP 90-volt D/C motor and v...

CUMBERLAND 484 GRANULATOR WITH FEED 18635

• Manufacturer: Cumberland

Cumberland model 484 granulator. S/N 421000-92513. 14″ x 16″ feed throat. 3 knife slant cut rotor, 2 bed knife. 15 HP 460-volt motor. Front feed roll in-feed only. Polynetics 15″ wide steel grooved feed rolls are...

CUMBERLAND 284 GRANULATOR WITH FEED 17151

• Manufacturer: Cumberland

Cumberland model 284 granulator. S/N 325525-7717. 10″ x 12″ feed throat 3 knife open slant cut rotor. Two (2) bed knives. 10HP 230/460V motor. Insulated tray feed hopper with rear mounted 8″ wide x 2.5″ OD knurle...

CUMBERLAND 484 GRANULATOR WITH FEED 17971

• Manufacturer: Cumberland

Cumberland model 484 granulator. S/N 521000-85003, 14″ x 16″ feed throat. 3 knife twin shear rotor. 2 bed knives. 15 HP 460v motor. 4″ OD left hand airveyor. Insulated front tray feed hopper with rear mounted 8″ ...

CUMBERLAND 284 GRANULATOR WITH FEED 17466

• Manufacturer: Cumberland

Cumberland model 284 granulator, S/N 525525-84012, 10″ x 12″ feed throat, 3 knife open slant cut rotor, 2 bed knife, 7.5 HP 460-volt motor, insulated tray feed hopper with rear facing 8″ wide knurled steel and in...

CUMBERLAND 284 GRANULATOR WITH FEED 12939

• Manufacturer: Cumberland

Cumberland model 284 granulator, S/N 325525-83061, 10″ x 12″ feed throat, 3 knife open rotor, 2 bed knife, approximate 2.75″ diameter x 8″ wide grooved knurled & interlocked steel feed rolls. Pneumatic pinched in...

Nelmor G1436MB Granulator with Feed Rolls

• Manufacturer: Nelmor

NELMOR – Model: G1436MB Nelmor G1436MB Granulator with Feed Rolls In-feed: 4″ Diameter x 35.5″ Wide Knurled Steel Feed Rolls / 30″ Wide In-feed Trumpet w/Dancer Bar – 1 HP D/C Motor & 8″ x 13″ Side Parts Feed Cut...