Used Piling Rigs

MOBILE B33 #2487T

Mounted on 2 axle trailer, Ford Industrial 4 cyl deck engine, front to back slide, winch, cathead, rig is gearbox and kelly driven, timing is off but rig starts and runs Price: $19,500

2017 AMS 9410-D POWERPROBE #1079Ta

Manufactured 2017, 440 hp Tier 4 diesel engine (approx. 740 hours on rig), 2400 psi @ 24 gpm hydraulic pump, 72” mast, 8” left to right, 10” in and out, oscillating mast 15” each side, hydraulic direct push hamme...

SIMCO 2800 AUGER DRILL #10321Ta

• Manufacturer: Simco

Manufactured late 1980’s-early 1990’s, mounted on 2006 Ford F-550 4WD with Ford 6.0 diesel engine, PTO, 54,000 miles, water tank, no Moyno pump, rig and truck runs but has been sitting since 2018, needs new tires...

1991 MOBILE B61HDX #5637T

Built 1991, Cummins 4BT deck engine, slide base, wiggle tail, wireline winch, plumbed for 3 more winches, no Moyno pump (but plumbed for one), water tank, (2) swing out auger racks, 3 leveling jacks, no auto hamm...

GEOTECHNICAL, ENVIRONMENTAL AND MINERAL EXPLORATION COMPANY FOR SALE #9774T

CME 45B AUGER DRILL Mounted on Bombardier Muskeg CME 45C AUGER Mounted on trailer CME 55 AUGER DRILL Mounted on truck Sonic Rig Full compliment of augers, flush joint casing, N size and H size tooling, 1000’s of ...

MOBILE B61HD #15007T

Manufactured 1980’s, trailer mounted, Ford 6 cyl gas engine, cathead, in/out slide base, 2 winches, Acker chuck head, 3 leveling jacks Price: $44,000 CDN MOBILE B61HD DRILL RIG

1998 MOBILE BK51 HDT #6015T

Drill manufactured 1998, Deutz air cooled 230 C.I.D. diesel engine, 4 speed transmission, 5,000 ft/lbs spindle torque, 5,000 lb hydraulic hoist with speed of 65 ft/min, 1300 lb hydraulic wireline hoist 350 ft/min...

2002 FAILING F9 #14445T

• Manufacturer: Failing

Manufactured 2002, Deutz deck engine, mounted on Interantional truck with diesel engine, Cummins deck engine, angle capable, in/out and side to side slide base, water tank, Moyno pump, no auto hammer, cathead, no...

1981 SIMCO 2400 #12174T

• Manufacturer: Simco

Built 1981, handles augers from 4 – 8 inches diameter, 50-100’. Percussive hammer can penetrate street surfaces, auger drill head can be used to bore to depths over 30’, unmounted Price: $28,500 SIMCO 2400 TRACK ...

1967 CME 55 #1090T

Manufactured 1967, older rig but runs, no angle capability, Ford 300 gas deck engine, in/out slide base, cathead, no autohammer, 2 winches, Moyno pump, auger racks, mounted on 1978 Chevy C65 truck with gas engine...

1985 CME 55 #12363T

Manufactured 1985, Ford Gas Industrial 300 engine, auto hammer, 3 winches, cathead, 3L8 Myno pump, siggle tail, breakout wrench, rod holder, mounted on 1998 Ford F800 diesel engine, 17,000 miles Price: $87,500 CM...

2017 CME 75 AUGER DRILL #10551Ta

Manufactured 2017, angle capabilities, Cummins 6BT diesel deck engine, Moyno 3L8 pump, mounted on 2017 International Workstar tandem axle truck with Cummins diesel engine, 5100 hours Price: $345,000 USD CME 75 AU...

1988 MOBILE B61 #12732T

Manufactured 1988, Moyno pump, Bean 35 pump, hydraulically driven rig, hydrostatic drive, 3 winches, 30' mast, new hydrauliuc pump, mounted on 1983 Ford 8000 6 x 6 truck, 3 leveling jacks, ready to work Price: $5...

1984 CME 55HT #9854T

Manufactured 1984, gas deck engine, in/out and side to side slide base, Moyno 3L6 pump, auto hammer, cathead, breakout wrench, 3 winches, water tank, auger racks, 2 toolboxes, driller’s platform, mounted on 1999 ...

1995 DIEDRICH D50 AUGER DRILL #4133T

• Manufacturer: Diedrich

Manufactured 1995, 19’ mast, 5,000 and 2000 lb winches, auto hammer, breakout wrench, water tank, 4 cylinder John Deere diesel deck engine, mounted on 2006 Peterbilt 335 truck with Cummins engine, Eaton 10 speed ...

Soilmec R-825 Piling Rig

• Manufacturer: Soilmec
• Model: R-825

Good condition Soilmec R-825 Piling Rigs manufactured in 2000. Located in USA and other countries. Click request price for more information.