Used Material Handling in Saxony, Germany

1986 Werkzeugmaschinen Silistra TCA 435x3710

• Manufacturer: Silistra

Total conveying length approx. 4850 mm lower conveying length approx. 3700 mm Chip conveyor Silistra TCA 435x3710 used. incline conveying length approx. 950 mm upper conveying length approx. 700 mm discharge heig...

1976 Institut für Zuschlagstoffe und Natursteine Großräschen BAR650

• Manufacturer: Institut für Zuschlagstoffe und Natursteine Großräschen

Vibromotor Type MTW7/380/50 motor weight approx. 200 kg vibrating trough vibrating feeder vibrating trough used trough length approx. 1200 mm trough width approx. 650 mm dosing vibrating chute with vibro motor fo...

1976 Institut für Zuschlagstoffe und Natursteine Großräschen BAR 650

• Manufacturer: Institut für Zuschlagstoffe und Natursteine Großräschen

Vibromotor Type MTW7/380/50 motor weight approx. 200 kg Vibrating feeder vibrating feeder vibrating feeder used vibrating chute silo feeder for sand, gravel, granualte, powder and other products and wastes trough...

Pre-press screw Saxlund solid double trough screw bunker screw with gear motor drive #26313

• Manufacturer: Saxlund

Dopell snails with collecting tank Type: DDA:VP-375:A270 Dopell auger trough auger/discharge auger with offset bearing and stuffing box and at the end of the screw with compressor tank which used to press into a ...

Neuhäuser 2.224-2

• Manufacturer: Neuhäuser

Neuhäuser Conveyor width 300 mm Permanent magnetic chute/chip conveyor Neuhäuser 2,224-2 2700 x 300 mm used Permanent magnetic slide conveyor chip conveyor for transporting punching scrap, chips and finished part...

Double floor trough chain conveyor TKF Redler length individual 5m up to 30m up to 60 to/H #26301

Double bottom and single bottom TKF Redler trough chain conveyor used drive and return part total length up to approx. 50-60 meters feasible trough length drive- + deflection part: 5,80 m with scraper chain. Plea...

Trough chain conveyor TKF Redler 7 m up to 120 to/H #27661

1,5 kW, 18 rpm Trough chain conveyor TKF Redler up to 120 to/Hused Drive motor NORD 220/380 V, 1,5 kW, 1410/18 rpm by changing the motor power can be increased Other designations: TKF, reedler, chain conveyor

COOPER TOOLS Balancer

Balancer, weight equalizer, spring balancer COOPER TOOLS Type BM14B used, tested !

McBULL® Balancer

Balancer, weight equalizer, spring balancer McBULL® Type MCB9366 As good as new !

ZPRB lifting device

• Lifting capacity: 1,200 kilogram

Level lifter, lift table, pallet lifter ZPRB Pallet lifter Height extended approx. 1040 mm Spindle stroke 380 V mobile due to 4 castors, 2 steerable ! used, tested !

Screening machine 5 x 0.9 m #B17434

• Manufacturer: BOSKER en ZONEN B.V.

Screening machine, vibrating screen used Basin and sieves made of stainless steel Vibrating screen approx. 4000 x 800 mm 3 basins (approx. 1200 x 900 / 1700 x 900 / 1800 x 900 mm) Depth of the basins approx. 1000...

Double-shaft trough auger 3.10 m stainless steel #K17395

Trough length 3100 mm Trough width 320 mm SEW G-motor Stainless steel screw conveyor Helix pitch 130 mm Helix height 55 mm Helix thickness 3 mm Shaft Ø 60 mm Outlet 320x300 mm on motor side Overall dimensions L44...

Blow-through lock Ø 300 mm #B16780

Blow-through rotary valve, rotary valve Rotary valve Product valve Dust valve Dosing valve Used Inlet opening approx. mm Installation height approx. mm Approx. chambers Drive with gear motor Overall dimensions ap...

Trough auger 3.5 m #B16753

• Manufacturer: MÜLLNER & LUX

Trough screw conveyor, screw conveyor used Inlet approx. 920 x 44 mm Outlet approx. 360 x 340 and 240 x 300 mm Drive with one gear motor approx. 1.5 kW 83 rpm 220/380 V Dimensions approx. 4000 x 600 x 700 mm The ...

Trough auger 2.8 m #B16768

Trough screw conveyor, screw conveyor used blade thickness approx. 2 mm opening approx. 250 x 250 mm Drive with a variable gear motor approx. 1 kW 22-110 rpm 220/380 V Dimensions approx. 3000 x 300 x 550 mm The a...