Used Processing in Canada

Open top tank on wheels

176 IMP -on 4 wheels - open top - flat bottom -304 stainless steel

Gast index regenair blower R2103

• Manufacturer: Gast
• Model: R2103

-Model: R2103 -CFM Open 60/50 Hz: 42/33 -Max. in. H2O Pressure 60/50 Hz: 39/30 -Max. in. H2O Vacuum 60/50 Hz: 35/25 -Shipping dimensions: Height 10" x Width 9" x Length 13 1/2" -Mounting bracket 4" x 8 7/8" -Bolt...

Day Ribbon Blender

-Sew-eurodrive motor: 330/575 V, 7.50 HP, 1720 RPM, -5/16 jacket thickness -3/8 shell thickness -Walls have an extension that can be taken off -Shipping dimensions: 48” width x 120” length x 66” height with base

Clamp on Mixer with Weg Motor

• Manufacturer: WEG

-0.750" shaft diameter needed -Phase 3 -HP: 0.33 -Volts: 575 -RPM: 1730 -Amps: 0.44

1,900 Litres stainless steel tank with mixer

• Manufacturer: Alfa-Laval

-500 US Gallon -ALFA-LAVAL Jacketed Stainless Steel Mixing Vessel -With Overhead Prop Mixer -80 psi. -Max steam pressure, plate reads 100psi @300F Max W Pressure -20f @100psi Min Des. -Ser. 14972.1 -Made in Canad...

Fischer Porter Flowmeter

• Manufacturer: Fischer

-Manufacturer: Bailey Fischer Porter -Model: 10A3555S -SN: 443592 01 01 -CRN #: OF2766.5 -Max design pressure: 690 kPa. gauge -(100 psig) @ 38 degrees C (100 degrees F)

Ball transfer station

-24"x36" -30" high -On stationary legs that can adjust in height

Tank with mixer on the bottom

-Tank dimensions:23" heigh x 24" wide. -Over all height 44" -4 legs are 22" tall -Off spout side of bottom is 2.5" diameter -Open top with lid -Cone bottom -37 IMP gall

Lightnin Mixer

• Manufacturer: Lightnin

-Manufacturer: Lightnin -IDENT NO: 809018 PSP -Volts: 115 -Cycle: 50/60 -Phase 1

Spencer Blower

• Manufacturer: Spencer

-Shipping dimensions: 50" L x 36" W x 42" H -Inlet/outlet: 4 3/4" -Volt: 230/460 -RPM: 3500 -HP: 15 -375S CFM -Type UT TE

Mixer with Stainless Prop

• Manufacturer: Baldor - Reliance

-Shipping dimensions: 120" length x 42" wide x 27" height -Each blade is about 22" long -Baldor Motor -3 Hp -575 volt

Hibon rotary lobe blower

• Manufacturer: Hibon

CATEGORY: Blowers/ fans Model SNH822 Serial 16170200 125 hp, 460 volt belt drive 3000 cfm @ 13"

GAST Regenerative Blower

• Manufacturer: Gast

-Manufacturer: GAST MFG Corp. -Blower: Model, R1102 -CFM OPEN 60/50 Hz -SN: 0592 -At 60 Hz: -Max pressure: 28.5 in H2O -Max Vacuum: 26.5 in H2O -At 50 Hz: -Max Pressure: 21 in H2O -Max Vacuum: 20 in H2O -Inlet/ o...

Atlas-Copco ZR 3 Industrial Compressor

• Manufacturer: Atlas-Copco
• Model: ZR 3

Good condition Atlas-Copco ZR 3 Industrial Compressors manufactured in 1989. Located in Sweden and other countries. Click request price for more information.