Used Tanks & Kettles in Bremen, Germany

70300 liter pressure tank, Aisi 304

• Manufacturer: Gross Apparatebau

Technical documentation: drawing,German Technical Supervisory Association TÜV documents,various documents remarks: Exact dimensions may vary slightly, one tank is sold with an agitator for an additional charge

25000 liter storage tank, Aisi 316

• Manufacturer: Metkon AG

remarks: Stand frame, Aisi 304; wall thickness of lower cylinder half approx. 6 mm; Extensive documentation available; tank by now already dismantled and warehoused horizontally; one tank is insulated but the ins...

1000 liter pressure tank, Aisi 304

remarks: 1 hand hole approx. 190 x 240 mm in the front bottom (hand hole cover made of plastic); 2 loose foot frames, Aisi 304 (2 different versions of the foot frames, as the previous operator's tanks were store...

69000 liter pressure tank, Aisi 304

• Manufacturer: Gross Apparatebau

Technical documentation: drawing,German Technical Supervisory Association TÜV documents,various documents remarks: Exact dimensions may vary slightly, 3 legs of 2 tanks were shortened during dismantling (these ar...

50000 liter isolated tank, Aisi 304

remarks: exact dimensions may vary slightly; riveted insulation is damaged in some places (see pictures); The bottom of the tank is filled with concrete

900 liter oval tank, Aisi 316

remarks: Height-adjustable screws of the feet incomplete (this would have to be compensated accordingly on site for installation); Not every tank may have a spray ball

1000 liter oval tank, Aisi 316

remarks: Height-adjustable screws of the feet incomplete or no longer exists (this would have to be compensated accordingly on site for installation); not every tank may have a spray ball

2500 Liter tank, Aisi 304

remarks: 1 manhole approx. 310 x 410 mm in the cylinder; 1 screwed outlet fitting with butterfly valve enlarges the outlet to DN 50 DIN 11851; tanks were professionally cleaned and overhauled in 2024; brand new r...

1585 liter tank, Aisi 304

remarks: 2 loose concrete saddles; 1 manhole approx. 340 x 440 mm in the front bottom; Inner length: approx. 1,650 mm; Inner width: approx. 705 mm; Interior height: approx. 1,490 mm; the spout is slightly dented;...

1000 liter pressure tank, Aisi 304

remarks: Tanks screwed into frame, Aisi 304; 1 hand hole diameter approx. 350 mm in the front base (hand hole cover made of plastic)

400 liter conical tank, Aisi 316

remarks: Cone height appr. 400 mm; 3-legged frame, Aisi 304; 3 short pipes inside the tank

2500 liter rectangular tank, Aisi 304

remarks: Basic dimensions inside: approx. 1,100 x 1,100 mm; Internal wall height: approx. 2,150 mm; light protective paint on the outside (no longer completely complete); Manhole diameter approx. 490 mm; slight d...

3600 liter insulated tank, Aisi 304

remarks: 4 support brackets, stainless steel; Manhole diameter approx. 460 mm (on 1 tank the toggle screw on the manhole cover is broken)

100 liter tank, Aisi 304

• Manufacturer: ABAB Allgemeine Behälter- u. Apparate Bau

remarks: Hanging design on 2 supports, Aisi 304; Outlet fitting no longer available

12000 liter tank, Aisi 316

remarks: smaller dents in the cylinder; small rectangular sheets were welded in by the previous operator in several places of the cylinder