Used Processing in Missouri, USA

SILVAN VERTICAL STANDING AIR RECEIVING TANK - Located At 315 Madison Street, Scott City, MO 63780

• Manufacturer: Silvan

SILVAN VERTICAL STANDING AIR RECEIVING TANK - Located At 315 Madison Street, Scott City, MO 63780

ALL S.S. HOPPER SYSTEM W/ 18" WIDE INTERNAL RUBBER BELT CONVEYOR, 58" X 58" X 117" HIGH - Located At

ALL S.S. HOPPER SYSTEM W/ 18" WIDE INTERNAL RUBBER BELT CONVEYOR, 58" X 58" X 117" HIGH - Located At 3100 Industrial Fuels Drive, Scott City, MO 63780

300 GALLON SYNDER INDUSTRIES LIQUID STORAGE TANKS - Located At 3100 Industrial Fuels Drive, Scott

300 GALLON SYNDER INDUSTRIES LIQUID STORAGE TANKS - Located At 3100 Industrial Fuels Drive, Scott City, MO 63780

48" WIDE X 3/4" THICK USED RUBBER CONVEYOR BELT, 4,200 LB. BELT WEIGHT - Located At 315 Madison

• Manufacturer: Correa

48" WIDE X 3/4" THICK USED RUBBER CONVEYOR BELT, 4,200 LB. BELT WEIGHT - Located At 315 Madison Street, Scott City, MO 63780

2023 Econoline 101701G-A 60"x48" Abrasive Blast Cabinet

• Manufacturer: Econoline

Air Regulator & Gauge Safety Switch Dust Collector Foot Pedal Nozzle Safety Gloves

Peerless 36 inch Twin Shaft Pugmill Plant

• Manufacturer: Peerless

Peerless 36" Twin Shaft Portable Pugmill Plant Detroit Diesel Engine Bituminous Pump For Making Cold Mix Asphalt Water Pump To Do Pug Mix (Have To Swap Out) Mounted On Single Axle Dual Tire Carriage W/Eye Hitch F...

SHOPBUILT 24″ X 80′ TRUSS CONVEYOR (24″ DEEP TRUSS) 162011

• Manufacturer: Shopbuilt

SHOPBUILT 24″ X 80′ TRUSS CONVEYOR (24″ DEEP TRUSS) Shopbuilt 24″x80′ truss conveyor (24″ deep truss) with 3x3x1/4 main cord & 2x2x1/4 lattice. 35 degree sealed idlers & 2 ply belt (good). Has gearbox, but no mot...

TAMROCK ZOOM TRACK HYDRAULIC DRILL 510118

• Manufacturer: Tamrock

Tamrock Zoom track model 600. Catt 3116 engine with approx 1000 hours. Unit has 8915 hours, drifter 7275 hours. Needs new seat and to be cleaned up. Drill runs and was working when parked.

Votator 6x72

• Manufacturer: Votator

Cherry Burrell Votator Scraped Surface Heat Exchanger 6x72 single barrel - Shown As Is but we can recondition if needed. S/N 3455353. Direct Driven by 20HP motor, 1755 rpm/230 rpm out. All wetted surfaces are ...

Filter Bag

Filter bags for polish filter, size #2. There are 6 boxes of 25 bags each. P2S Polyester Felt Filter Bag. Bags measure 2 ft 5 in long. Priced for the LOT.

1995 United Equipment Technologies XCEL 22

• Manufacturer: United Equipment Technologies

Gearbox and motor - inline. Was originally used for top entering agitator, United Equipment Technologies Model Xcel-22, S/N C1641-7B. Falk right angle gear box. Includes Motor 10HP, 1800 rpm. [Photos of sh...

Unknown 100 HP Blower

• Manufacturer: Unknown

This unit was blowing dust to a large baghouse in a large facility. There is also a 75 HP blower and baghouse available at the same location. Piping is available. Unit will be loaded on the truck.