Building Filters

Fluke 114General Basic Use Fluke 115Electronics/Field Service
- Manufacturer: Fluke
- 6000 count - Back Light - Bargraph - True RMS - 600V AC/DC - Ohms - Continuity - V-Check - LoZ - Display Hold - Max/Min/Avg - Ohms - 3yr Warrenty - 6000 count - Back Light - Bargraph - True RMS - 600v AC/DC - ...
Gauteng, South Africa
Interface / Data Acquisition Units (UTCU-0320)
- Manufacturer: Labequip
Measuring Instruments Product Codes: Description: Interface Units are a sophisticated data acquisition unit which provides the link between software and the transducers connected to the test equipment. UTCU -0320...
Alberton, South Africa
Fluke 113
- Manufacturer: Fluke
- VCHEK™ LoZ low impedance measurement function to simultaneously test for voltage and continuity - True-rms for accurate ac measurements on non-linear loads - A large backlit display allows for easy vis...
Gauteng, South Africa
Shape Index Calliper (UTA-0460)
- Manufacturer: Labequip
General and Geometric Properties Shape Index Calliper is used for the determination of the shape factor of aggregates. Measurement range is 200 mm and graduated with 0.05 mm increments. Due to the continuous deve...
Alberton, South Africa
Stress and strain analysis on a membrane (FL 120)
deflection and strain of a membrane under compressive load Description: In experimental stress and strain analysis, strain gauges are used to determine stresses and strains in components and structures. The maxim...
Alberton, South Africa
Fluke 53-II
- Manufacturer: Fluke
Fluke 54-II Dual Channel Digital Thermometer Thermocouple Types (J,K,T,E) Dual Input Relative Time Backlight Max Min/Avg Recording (T1 –T2) True Differential Data Logging 500 Points IR data port for interface t...
Gauteng, South Africa
Fluke 52-II
- Manufacturer: Fluke
Fluke 53-II Single Channel Digital Thermometer Thermocouple Types (J,K,T,E) Dual Input Relative Time Backlight Max Min/Avg Recording (T1 –T2) True Differential Data Logging 500 Points IR data port for interface t...
Gauteng, South Africa
PC Based Data Loggers (See Data Loggers)
- Manufacturer: ACR
ACR OWL Single Channel Data Loggers Temperature External Temperature Internal DC Voltage AC Current Pressure DC Current 4 to 20mA ACR Smart Reader Multi Channel Data Loggers Temperature DC Process Voltage...
Gauteng, South Africa
Fluke CO-210 Carbon Monoxide Probe
- Manufacturer: Fluke
CO-210 Carbon Monoxide Probe - As an accessory to a digital multimeter with dc mV inputs. The Fluke CO-210 displays CO levels from 0 to 1000 PPM. - As a stand-alone device, the LED indicator and beeper t...
Gauteng, South Africa
Photoelastic experiments with a transmission polariscope (FL 200)
generate stress patterns with linear or circular polarised light Description: Photoelasticity is a proven method of analysing and recording mechanical stresses and strains in components. It is used both for quant...
Alberton, South Africa
Stress and strain analysis on a thin-walled cylinder (FL 130)
strain on a vessel under internal pressure Description: Pipes, pressure vessels, steam boilers etc. are considered as thin-walled vessels during design. The principal stresses are key variables in calculating and...
Alberton, South Africa
Heat Stress WBGT Meter and Data Logger (LES-AZ87786)
The Wet Bulb Globe Temp. (WBGT) is a composite temperature used to estimate the effect of temperature, humidity, wind speed and solar radiation on humans. Radiant temperature with 75mmØ x 75mm high black ball Plu...
Alberton, South Africa
Strain gauge application set (FL 101)
complete equipment for application of strain gauges with wiring and connecting of strain gauges Description: Measurement using strain gauges is the most important method of measuring mechanical strain. In this me...
Alberton, South Africa
Photoelastic Demonstration (FL 210)
generate stress patterns with linear or circular polarised light in typical polycarbonate components Description: Photoelasticity can be used to demonstrate stress profiles and stress concentrations in component ...
Alberton, South Africa
Ferrous and Non-Ferrous – Separate Probe (LES-EC-770XE)
- Manufacturer: Labequip
Zero and multi-point calibration (up to 4 points) Range: 0 ~ 3000µm Best resolution: 0.1µm <100µm Separate F and NF probe on 1m cable Magnetic induction and eddy current Automatic substrate recognition Continuous...
Alberton, South Africa
