Used Material Handling in Saxony, Germany

Drum motor 1.5 kW 1.5-220 x 600 x 0.66 #B15322

Drum motor, belt drive, deflection drum used VEPA Elektroinstalationen GmbH diameter approx. 220 mm drum width approx. 600 mm 1,5 kW 220/380 V All items are checked for function before delivery, if technically po...

Drum motor 1.1 kW 1.1-220 x 600 x 0.33 #B15323

Drum motor, belt drive, deflection drum used VEPA Elektroinstalationen GmbH diameter approx. 220 mm drum width approx. 600 mm 1,1 kW 220/380 V All items are checked for function before delivery, if technically po...

2015 BARL Maschinenbau GmbH KT0803F17T50

• Manufacturer: BARL Maschinenbau GmbH

Cooling screw trough screw double-walled heated or coolable used total dimensions of the trough screw approx. 9,5 x 1,3 x 1,6 m trough length approx. 8000 mm trough width approx. 430 mm trough depth approx. 480 m...

Chip conveyor #24984

Overall dimensions Length approx. 3,00m, height approx. 1,70 m, width approx. 1,75 m Dimensions scraper belt conveyor width 0,85 m discharge height 1,10 m Original application in machining center Hüller Hille Typ...

1986 Werkzeugmaschinen Silistra TCA 435x3710

• Manufacturer: Silistra

Total conveying length approx. 4850 mm lower conveying length approx. 3700 mm Chip conveyor Silistra TCA 435x3710 used. incline conveying length approx. 950 mm upper conveying length approx. 700 mm discharge heig...

1976 Institut für Zuschlagstoffe und Natursteine Großräschen BAR650

• Manufacturer: Institut für Zuschlagstoffe und Natursteine Großräschen

Vibromotor Type MTW7/380/50 motor weight approx. 200 kg vibrating trough vibrating feeder vibrating trough used trough length approx. 1200 mm trough width approx. 650 mm dosing vibrating chute with vibro motor fo...

1976 Institut für Zuschlagstoffe und Natursteine Großräschen BAR 650

• Manufacturer: Institut für Zuschlagstoffe und Natursteine Großräschen

Vibromotor Type MTW7/380/50 motor weight approx. 200 kg Vibrating feeder vibrating feeder vibrating feeder used vibrating chute silo feeder for sand, gravel, granualte, powder and other products and wastes trough...

Pre-press screw Saxlund solid double trough screw bunker screw with gear motor drive #26313

• Manufacturer: Saxlund

Dopell snails with collecting tank Type: DDA:VP-375:A270 Dopell auger trough auger/discharge auger with offset bearing and stuffing box and at the end of the screw with compressor tank which used to press into a ...

Neuhäuser 2.224-2

• Manufacturer: Neuhäuser

Neuhäuser Conveyor width 300 mm Permanent magnetic chute/chip conveyor Neuhäuser 2,224-2 2700 x 300 mm used Permanent magnetic slide conveyor chip conveyor for transporting punching scrap, chips and finished part...

Double floor trough chain conveyor TKF Redler length individual 5m up to 30m up to 60 to/H #26301

Double bottom and single bottom TKF Redler trough chain conveyor used drive and return part total length up to approx. 50-60 meters feasible trough length drive- + deflection part: 5,80 m with scraper chain. Plea...

Trough chain conveyor TKF Redler 7 m up to 120 to/H #27661

1,5 kW, 18 rpm Trough chain conveyor TKF Redler up to 120 to/Hused Drive motor NORD 220/380 V, 1,5 kW, 1410/18 rpm by changing the motor power can be increased Other designations: TKF, reedler, chain conveyor

Trough auger 4.30 m made of stainless steel #K17391

Trough length 4400 mm Trough width 430 mm without motor Stainless steel screw conveyor Spiral pitch 340 mm Spiral height 130 mm Helix thickness 5 mm Shaft Ø 130 mm Outlet Ø 430 mm on both sides Overall dimensions...

Double-shaft trough auger 6 m stainless steel #K17396

Trough length 6000 mm trough width 520 mm without motor Stainless steel screw conveyor Helix pitch 20 mm Helix height 60 mm Helix thickness 4 mm Shaft Ø 150 mm Outlet 520x300 mm on both sides Overall dimensions L...

Stainless steel trough auger 5.7 m #K17398

Trough screw conveyor, screw conveyor used Diameter: Ø approx. 400 mm blade thickness approx. 4 mm Outlet approx. 430 x 430 mm stainless steel Dimensions approx. 6800 x 540 x 500 mm The steel screw helix installe...

Trough auger 3 m 1.5 kW #B17360

Trough screw conveyor, screw conveyor used blade thickness approx. 2 mm openings approx. 340 x 280 mm Drive with gear motor 1.5 kW 125 rpm 220/380 V Dimensions approx. 3500 x 400 x 700 mm The auger was installed ...