Used working in USA

Shaft Mount Reducer 12.7:1 Ratio Gearbox 138 RPM Screw Conveyor Drive

In Good Used Condition. Removed from a Working Environment. -No tag on gearbox. If this item ships as Flat Rate Freight please see details in Shipping tab

Shaft Mount Reducer 25:1 Ratio Gearbox Screw Conveyor Drive Taper Bushed

• Manufacturer: GEA

Ratio: 25:1 In Good Used Condition. Removed from a Working Environment. -No tag on gearbox. 275 Lbs. If this item ships as Flat Rate Freight please see details in Shipping tab

Westfalia 410D | 96” Bag Flattener

• Manufacturer: GEA

Unit is USED - Some minor scratching/blemishes/streaking can be seen on the surfaces of the unit, but is not affecting the unit intended use. The unit was removed from a working environment and was functioning as...

Plate and Frame Heat Exchanger 6 m² (64.6 ft²) Stainless Steel 316 - IPP# 703724

• Manufacturer: GEA

Max working pressure (Side A) 6 bar @ 50 degrees C; (Side B) 6 bar @ 50 degrees C Capacity (Side A) 49.8 liter; (Side B) 46.0 liter). (2) carbon steel pressure plates.

GEA WESTFALIA CSA 160-47-076

• Manufacturer: GEA
• Model: CSA 160-47-076

Used GEA Westfalia CSA 160-47-076 separator centrifuge. Working speed of bowl up to 6800 rpm. Maximum temperature up to 100°C. Machine is driven by Atex rated electric motor 30 kW, 50 HZ. Also includes tools.

600 Liter GEA High Shear Mixer, Model PMA 600 Advanced

• Manufacturer: GEA

600 Liter GEA High Shear Mixer, Model PMA 600 Advanced Unused 600 liter GEA high shear mixer, model PMA 600 Advanced, 316L stainless steel product contact surfaces, 240-450 liter working capacity, 36 kw main impe...

Stainless Steel 316 GEA Pharmadule MP2/3-K2-F1/2 Dryer-Fluid Bed - IPP# 233966

• Manufacturer: GEA

Documentation shows Mills but we did not get some of them. With spare product containers. (read below) 60 kg Explosion shock resistant fluid bed dryer. Designed for cGMP production, it is a contained system, and ...

Stainless Steel 316L GEA MP 4 Dryer-Fluid Bed - IPP# 233968

• Manufacturer: GEA

Note: Drawings show Mills, we did not get some of them. Suitable for installation in Hazardous areas. Typical working volume is 30-225 liters based on the allowable product density of 1500 kg/m This fluid bed dry...

WESTFALIA HSA 200-06-777

• Manufacturer: GEA
• Model: HSA 200-06-777

Used Westfalia model HSA 200-06-777 stainless steel centrifuge. Intermittent solids discharge with basic design bowl clarifier design. Sanitary covers including sediment cover. Belt driven by 14/60 kW 400 volt 3/...

Centrifuge, Disc, Westfalia, Model OSB35-0136-066, Oil Separator, 20 HP #C744516

• Manufacturer: GEA

Westfalia Model OSB35-0136-066 oil separator/purifiers, previously used in bio-diesel operation. Bowl is rated for 6540 RPM with DES/40 permissible density of product to be treated, 1.0 kg/dm3 heavy liquid and 1....