Used Processing in Poland

BATTENFELD BA 600 CDC

• Manufacturer: Battenfeld
• Model: BA 600 CDC

The was built in Austria in 2002. It is equipped with control. It has a closing force of 600 kN forms. The screw diameter is 33 mm and the injection volume is 99 cm3. The machine has plates for mounting injection...

VICTOR MSZ 30

• Manufacturer: Victor

was produced in 2015. The machine is used to produce bottles with a maximum height of ≤190mm and a maximum diameter of ≤100mm. It has a screw with a diameter of 40 mm, running at a speed of 10 to 225 revolutions ...

ZWUT PSK-1

• Manufacturer: ZWUT

was manufactured in Poland. The furnace is used for various types of laboratory and industrial work. The heating chamber of the furnace is resistant to high temperatures, thanks to fireclay and thermal insulation...

GT85 GT 2000-3P ultrasonic cleaner

The was manufactured in 2008. The machine consists of three bathtubs – the first bath is used for washing and phosphating, the second bath is used for rinsing and the third bath dries the product. The washing bat...

MAYER & MAYER DXR R2020R L-P-PUB PDX20 40-100 P

• Manufacturer: Mayer

of German manufacture was manufactured in 2015. The device is a filling station for hand-held dispensers with two-component glue with low and medium viscosity. The glue is loaded from pails or drums with a capaci...

ATLAS COPCO FX 7

• Manufacturer: Atlas-Copco
• Model: FX 7

was built in 2014. This reliable, cost-effective and easy-to-use device effectively dries compressed air of oil, moisture and water vapour, eliminating the risk of the formation an oily deposit which is dangerous...

BATTENFELD TM 1300

• Manufacturer: Battenfeld

was built in 2004 in Austria by BATTENFELD GmbH. The machine is used for the economical mass production of plastic parts of various colours, shapes and sizes. The workpieces are produced using the injection mould...

ATMOS PDS PDP 35 towable air compressor

• Manufacturer: Atmos

was built by ATMOS Chrást s.r.o. in the Czech Republic in 2021. The machine is used wherever top-quality compressed air is required. Its components from renowned European brands ensure the highest possible energy...

KEPKA CT 900 ET tunnel kiln

• Manufacturer: KEPKA

was built in 2009 in Poland by the Kepka Group. The machine is designed for firing any type of decoration on glass and ceramics at a maximum temperature of 900°C. The working chamber is heated by a system of spir...

AIRPOL 15

• Manufacturer: Airpol
• Model: 15

The was produced in Poland in 2008. The 15 kW machine has a capacity of 5.8 m3/min at working pressure of 10 bar. The machine motor rotates at 3000 rpm. The total weight of the screw compressor is 340 kg.

PONAR ŻYWIEC SG-180FE-2B

• Manufacturer: PONAR ŻYWIEC

built in 2011, is designed for crushing of plastic waste. Made of high quality steel, the plastic mill with dust exhaust ensures high rigidity of construction, high efficiency and long service life. The main adva...

RUIAN KODA MACHINERY ENG-500

• Manufacturer: RUIAN KODA MACHINERY

, manufactured in China in 2020 is dedicated to the production of foil products i.e. breakfast bags or disposable gloves, using interchangeable sealing moulds. The robust steel body of the film glove production l...

MARK RMB 18 IVRD

• Manufacturer: Mark
• Noise level: 70 decibel

was built in 2020 in Italy. The machine, consisting of reliable components, a robust housing and an easy-to-use control panel, delivers the highest quality compressed air, free of water vapour that is harmful to ...

2021 RYCSYSTEM

• Manufacturer: RYCSYSTEM

The bottling line is used for automated dosing, then filling and labeling of liquid products. These can be food products such as juices and beverages, as well as other products (chemicals, cosmetics, pharmaceutic...

2020 WENZHOU FURI MACHINERY CO. LTD. FRTB-SD3-C

• Manufacturer: WENZHOU FURI MACHINERY CO. LTD.