Used Processing in Ontario, Canada

Quadro Conical Sifter

• Manufacturer: Quadro

-Shipping dimensions: length 29" x width 32" x height 27" -Output: 2 1/2" -575 V -3 Phase -60 Hz -missing head

Rosedale stainless steel filter cavities 2"

• Manufacturer: Rosedale

-Shipping dimensions: 18”length x 14” width x 48” height -2” NPT inlet and outlets -Model number: NC08-30-2P-*-150-S-V-PB -Pressure rating: 150 PSIG -4 in stock

Clamp Down Bag Filter

-Shipping dimensions: length 42" x width 15" x height 13" -Inlet / outlet - 2.5"

Stainless-steel Shelf

-Dimensions: Length 60" x Width 21" x Height 14.5" -Stainless steal

Three Sink Stainless-steel Unit

-Sink(s) dimensions: Length 24" x Width 18" x Height 14" -Total dimensions: Length 102" x Width 27.5" x Height 50"

Stainless Cartridge Filter

-Shipping dimensions: length 12" x width 15" x height 41" -Input / output - 2" -Drain - 1"

Cartridge Filter Cavity

-New cartridges available -2 available -Total dimensions: -Height: 24" -Diameter: 8"

Twister T4 Trimmer

-Dimensions: 25" length x 15" width x 16.5" height -Brand new in box -115 V -2A current draw -Blade motor: 200W/0.25 HP -Tumbler Motor: 6w/1/125 HP -5 inch discharge -speed control

Small Mill w/ motor

• Manufacturer: Scott Equipment Co

-Scott Equipment Co Mill with Baldor Motor -Baldor Motor: 5 hp, 208/230-460 V, 1750 RPM, 3 phase, 60 Hz -Shipping dimensions: 40" L x 38" W x 30" H

Twister T2 Trimmer

• Manufacturer: Twister

Sterling motor -1 Hp -115/208-230 V -1 Phase -60 Hz -15.4/7.5-7.7 amp -20 Amp plug -Tested November 13/2024. Works good

Canway walk overs

• Manufacturer: Canway

-5 step up walk over -Maximum rated load is 400LBS or 1 person -Stationary -Canway -Railings

2" Fil-Trek Bag Filter

• Manufacturer: Fil-trek

-Fil-Trek SL series bag filter -Model: S6SL111-2P-CD-150 -Serial number: V11021-1 -316 Stainless-steel -Housing dimensions: -Diameter: 8.5" -Depth: 25" -Rated: 150/FV psi at 150 to 400 degrees F -New

2" Fil-Trek Bag Filter

• Manufacturer: Fil-trek

-Fil-Trek SL series bag filter -Model: S6SL111-2P-CD-150 -Serial number: V11021-1 -316 Stainless-steel -Diameter: 8.5" -Depth: 25" -Rated: 150/FV psi at 150 to 400 degrees F -New

Fume extractor

• Manufacturer: Nedermann

-Nederman Filter box -Shipping dimensions: 53" L x 37" W x 57" H -Lafert motor: 3 HP, 3495 RPM, 575 V, 60 hz, 3 ph

Step Ladder

-Tilt and roll step ladder -Top step height: 27" -Step width: 22"