Used Processing in North Brabant, Netherlands

(c) 2015 van Dijke processing equipment organic water

• Manufacturer: Van Dijk

Equipped with cisterns, 3-stage overflow system, bumped water system, centrifugal pump, stainless steel discharge separator, 1 residual waste elevator belt, 1 passage mesh conveyor, with weighing device and frequ...

(c) Final combination of the complete Biorefinery processing line. Lots 1 to 30

(c) Final combination of the complete Biorefinery processing line. Lots 1 to 30

(c) 2015 van Dijke Processing equipment TS-3 Tare separator

• Manufacturer: Van Dijk

Equipped with 2 hydraulic slide valves, 1 oil pump unit, 400 volts. This lot is part of the final combination 31 (1 t/m 30)

Aquamatic Automatic Liquid Sampler

Measuring volume: 100-500ml, sampling of process or wastewater.

(c) 2019 Visscher Cutting filter L3000 Mill macerator

with SDN cavity pump, type: DN-B-641, motor power! 5.5 KW, on chassis. including pneumatic valve and flexible hose up to the extractor. This lot is part of the final combination 31 (1 t/m 30)

(c) 2017 Visscher Twin separator installation

motor power: 22KW, equipped with REKO sieve bend, type: 1200-LB/0071/X (2013), including buffer tank, 2 RX pneumatic butterfly valves, cage ladder and steel frame construction. This lot is part of the final combi...

(c) Central control cabinet

for washer 1 and 2, separator and circulating pump, equipped with Siemens Simatic HMI operator panel. This lot is part of the final combination 31 (1 t/m 30)

2015 Watt drive mixer

0.75 kW electric motor with gearbox and 1200 mm long arm

(c) Flush coil installation

• Manufacturer: RAS

Consisting of 2 stainless steel tanks size approximately ø 1800 x h4400 mm, each with 1 Vischer slurry press, 2 mixers, 1 bottom valve, 2 OBPI cavity pumps, type: BPI 80DNL1, capacity: 39 m3/h, motor power: 5.5 K...

(c) Feed auger cutting machine

motor power: 11 KW, 400 volts, equipped with emergency stop protection, Lincoln central lubricator, 1 stainless steel motor-driven feed conveyor, dimensions: L4000 x W1600mm, including galvanized walkway. This lo...

(c) 2014 Toro FRC-20 Dissolved Air Flotation Unit

• Manufacturer: Toro

equipped with stainless steel chassis, walking platform, 1 vertical steel pressure tank, 2 transport pumps, 3 dosing pumps, 1 Endress + Hauser flow meter, valves and piping under the flotation unit. including 1 s...