1996 Okuma LH35-N
- Manufacturer: Okuma
- Model: LH35N
OSP7000L,. Swing over bed: 610mm,. Distance between centers:1000mm, S:X405*Z1000mm, V6 turret, H4 turret H4 tool rest, 500mm 4-jaw chuck 500mm 4-jaw chuck (Kitagawa IA8-500), with With chip controller (right hand...
Toyohashi, Japan
2016 Murata Machinery MW80
- Manufacturer: Murata
MURATA-FANUC32iB, Maximum cutting speed: φ80*50mm, S:(X)320*(Z)200mm 6000rpm, Gang tool post x 2 *If there are any discrepancies between the product description and the actual product, the actual product will tak...
Toyohashi, Japan
2014 Takamatsu XW130
- Manufacturer: Takamatsu
FANUC 0i-TD,. Max. processing: 280*155mm dia. Swing: 250mm dia. Main spindle through-hole diameter: φ61mm, 4000rpm 4000rpm, S:X150*Z150mm S:X150*Z160mm, 8-inch chuck, 8 square turrets Each octagonal turret, with ...
Toyohashi, Japan
Nakane Seisakusho NST-13H
- Manufacturer: Nakane Manufacturing Co.
Swing: 360 mm,. Drilling capacity: 13mm, (steel)10(cast iron)12mm, (cast iron)12mm, (steel)10(cast iron)12mm Threading capacity: (steel)10(cast iron)12mm,, Spindle taper: .2½, .2½, .2½ Spindle taper: .2½, Table: ...
Toyohashi, Japan
Ashina ATD-410
- Manufacturer: Ashina
- Model: ATD-410
Swing: 410mm,. Threading capacity: (cast iron) 5 to 16 (steel) 5 to 13 mm,, Drilling capacity: 19 mm,, Drilling capacity: 19 mm, Drilling capacity: 19 mm, Drilling capacity: 19 mm, Drilling capacity: 19 mm Drilli...
Toyohashi, Japan
2001 Nakamura Tome WT250
- Manufacturer: Nakamura tome
- Model: WT-250
FANUC18i-T,. Swing over bed:250mm,, Max. Max. machining: ø250*555mm,. S:(X1)195*(Z1)600*(X2)195*(Z2)600*(Y)±41mm, Main spindle: 4500rpm(variable speed), Sub spindle: 4500rpm(variable speed) Sub spindle: 4500rpm(v...
Toyohashi, Japan
2004 Miyano BNE-34SY
- Manufacturer: Miyano
- Model: BNE34SY
FANUC18i-T,. Max. machining: Main/sub dia. 34*90mm, Upper turret 12 square, S:X150*Z380*Y±40mm S:X150*Z380*Y±40mm, Lower turret 10 square, S:X115*Z1212mm S:X115*Z125mm, Sub B-axis Sub B-axis, Main and sub Main an...
Toyohashi, Japan
Amada CSW-250
- Manufacturer: Amada
- Model: CSW-250
Sheet metal machine Current status: Available for immediate delivery
Nagoya, Japan
1998 Takizawa Ironworks TAC510×1000
- Manufacturer: Takizawa Iron Works
FANUC 20T,. Swing over bed:510mm,. Distance between centers:1000mm, S:X285*Z955mm, 15 to 1500rpm, 3-jaw 10-inch chuck (Kitagawa JN10T), with splash cover With splash cover If there is any discrepancy between the ...
Toyohashi, Japan
2002 Techno Washino C3
- Manufacturer: Washino
- Model: C3
FANUC-21i-T, Swing above bed: φ550mm, Center distance: 800mm, S: 340mm x 650mm, 23-1800 rpm (16 speeds), 3-jaw 9-inch chuck *If there are any discrepancies between the product description and the actual product, ...
Toyohashi, Japan
Takeda TC-22N-3
- Manufacturer: Takeda
- Model: TC-22N-3
Pressing capacity 10ton, corner notch 220 x 220, maximum plate thickness 3.2mm, machine No. 11727
Handa, Japan
Aichi, Japan
2006 Techno Washino G07-M
- Manufacturer: Washino
FANUC 21i-TB, Maximum swing: φ285, Standard workpiece size: φ100*100mm, Spindle speed: 6000 rpm, 6-inch 4-jaw chuck, Milling unit: 625-2500 (low speed) / 1250-5000 (high speed), S: (X)480*(Z)285mm *If there are a...
Toyohashi, Japan
Yoshida Iron Works YR5-130
- Manufacturer: Yoshida
- Model: YR5-130
Drilling capacity: 50mm(steel), M48(steel), M48(steel), M48(steel), M48(steel), M48(steel), M48(steel) Threading capacity: M48 (steel), Distance from column surface to spindle center: 290 to 1300 mm Distance from...
Toyohashi, Japan
1990 OKADA/TOMINAGA TRE-2000D
- Manufacturer: Okada
Drilling capacity: 75mm(steel), M60(steel), M60(steel), M60(steel), M60(steel), M60(steel), M60(steel) Threading capacity: M60 (steel), Distance from column to spindle center: 410 to 2020mm, Spindle end to base f...
Toyohashi, Japan
Tip: Enter manufacturer, model or keyword