Used l/c

DAVIS STANDARD 150IN 1.5″ 24:1 17708
- Manufacturer: Davis-Standard
Davis Standard model 150IN DS-20 1.5″ extruder, S/N J6173, 1984 model year, 24:1 L/D vented barrel at a 42″ centerline. Davis Standard 6.53:1 gearbox rated for 50 HP with a service factor of 1.25 for a 152 RPM sc...
Elk Grove Village, IL
A&G EXTRUSION 30MM 3 HP 18677
- Manufacturer: A&G Mercury
One (1) used A & G Extrusion Model CE-30 30mm pedestal extruder. S/N 1380. Having a 20:1 L/D ratio. Unit has an electrically heated and non-vented barrel. Single blower on last zone of the barrel. Benzlers gearbo...
Elk Grove Village, IL
WERNER & PFLEIDERER ZSK40 TWIN 17698
- Manufacturer: WP
Werner & Pfleiderer Model ZSK40 40mm co-rotating twin screw extruder, S/N 180399, 1990 model year, 46:1 L//D vented barrel with 11 barrel sections and a 41″ centerline. Driven by a 50 HP 500-volt 1750/2100 RPM D/...
Elk Grove Village, IL
BRABENDER 3/4″ LAB EXTRUDER 18623
- Manufacturer: Brabender
Used C.W. Brabender Independent Table Top Extruder. S/N 1067/4. Type IND/EXTR/16-04-000. 3/4″ diameter 25:1 L/D ratio barrel. Four (4) zone temperature control panel. Extruder driven by a 1 HP D/C motor with SCR ...
Elk Grove Village, IL
Trusted Seller
HERLAN P10
- Manufacturer: Herlan
- Model: P10
Used HERLAN P10 Impact Extrusion Press Manufacture - Herlan / 19?? / SN - - Model - P10 Nominal Power - 620 metric tons Stroke Length - 325 mm max Aluminum (99.5) - Max Diameter - 75mm - Max Wall Thickness - ...
Banner Elk, NC
Trusted Seller
1963 HERLAN P10
- Manufacturer: Herlan
- Model: P10
Used HERLAN P10 Impact Extrusion Press Manufacture - Herlan / 19?? / SN - - Model - P10 Nominal Power - 620 metric tons Stroke Length - 325 mm max Aluminum (99.5) - Max Diameter - 75mm - Max Wall Thickness - ...
Banner Elk, NC
Trusted Seller
1963 HERLAN P8
- Manufacturer: Herlan
Used HERLAN P8 Impact Extrusion Press Manufacture - Herlan / 1963 / SN - 837 - Model - P8 Nominal Power - 400 metric tons Stroke Length - 335 mm max Aluminum (99.5) - Max Diameter - 65mm - Max Wall Thickness ...
Banner Elk, NC
DAVIS STANDARD 165mm (6.5″) EXTRUDER 19033
- Manufacturer: Davis-Standard
One used (1) Davis Standard model 165MM60T 165mm (6.49″) extruder having a 34:1 L/D ratio with a nine (9) zone electrically heated, water cooled (closed loop), vented and plugged barrel at presently an 89″ center...
Elk Grove Village, IL
WERNER & PFLEIDERER ZSK20 TWIN 17702
- Manufacturer: WP
Werner & Pfleiderer Model ZSK20 20mm co-rotating twin screw extruder. S/N 02-3108-1000-010-1, Has 40:1 L/D barrel at a 43″ center line driven through a 3:1 gearbox with a 37 newton meter torque capacity per screw...
Elk Grove Village, IL
LEISTRITZ 27MM TWIN SCREW EXTRUDER 18970
- Manufacturer: Leistritz
Used Leistritz Twin Screw Extruder, Type MIC 27-GL-36D. (2) 1.05″ (27 mm) diameter screws. 36:1 L/D Ratio. Co-rotating. 8 barrel housing section electrically heated, water cooled. (1) Degassing port. Maximum scre...
Elk Grove Village, IL
CINCINNATI EXTRUSION 45MM EXTRUDER 18639
- Manufacturer: Cincinnati
Used Cincinnati Extrusion model Alpha 45-28G 45mm (1.77″) single screw extruder. S/N U2203. 28:1 L/D five (5) zone electrically heated, air cooled, and non-vented barrel at a 42″ centerline height. Hersteller Wat...
Elk Grove Village, IL
Trusted Seller
HERLAN BST - BST/S - BDZ
- Manufacturer: Herlan
Herlan Tube Trimmers: IEX-205 BDZ UNITS: - 1 trimmer available ------------------------------------------------------------------------- BST UNITS: - 7 trimmers available BST Specifications: - Automatic trimmi...
Banner Elk, NC
Trusted Seller
Extruder 99.8 mm (3.9 in) Carbon Steel - IPP# 706692
- Manufacturer: SMS Buss
single screw Ko-Kneader system, processing length 16 L/D, carbon steel heated screw, 15mm screw oscillating stroke, screw root diameter 65mm, Theo. pitch in kneading zone (2-spirals) 60mm, pitch in infeed zone (1...
Princeton Junction, NJ
Dr. Collin ZK25×24/42D Twin-Screw Extruder for Sale
- Manufacturer: Dr. CollinDr. Collin
54037001 Used Dr. Collin ZK25x24/42D Twin Screw Extruder. 25mm Diameter screws. 42:1 L/D. Maximum screw speed 521 RPM via a gearbox by a 30kW motor. 7 housing sections. Electrically heated, water cooled. Approxim...
Belvidere, IL
DAVIS STANDARD 3.5″ EXTRUDER W/DUAL 17744
- Manufacturer: Davis-Standard
Davis Standard straw/tubing co-extrusion extrusion package manufactured 10/2012Last used on three color straws extruding two lanes of straws at one time. Extruders and controls are unitized on a single base. 460/...
Elk Grove Village, IL