Used Cut To Length Lines

1983 HILGELAND CH7VA

• Manufacturer: Hilgeland

Diameter range: 27 mm | Shaft length under head: 50 mm | Max. cut-off length: 100 mm | Output pieces/min: 60

СTL line Spotti 1550x6x25t (flying shear, two levelers)

• Manufacturer: Spotti/LDM

СTL line Spotti 1550x6x25t is used for coil metal processing with 6mm maximum metal thickness. Line is equipped with two levelers and flying shear Line consist of uncoiler, two levelers, flying shear, stacker

*** Used Cut To Lenght Lines

• Manufacturer: Coil Sheet Metal Equipment

> See Section: Cut To Length Lines -

Spotti СTL line 1550x6x25t (flying shear, two levelers)

• Manufacturer: Spotti

СTL line Spotti 1550x6x25t (flying shear, two levelers) Make: Spotti/LDM Year: 2000 Maximum coil width: 1550mm Maximum metal thickness: 6mm Maximum coil weight: 25t Line consist of uncoiler, two levelers, f...

2007 LIAN SHYANG LS-C-NF-14B6LS PKO

• Manufacturer: LIAN SHYANG

Info: bushing cut-off | Diameter range: 16 mm | Number of dies: 6 | Number of stations (incl. cut off): 7 | Cutting length: 20 mm | Speed ppm: 120-140 | Pko length (max): 18 mm | Press power: 100 to

1997 CHUN ZU CBF-254L

• Manufacturer: Chun Zu

Info: bushing cut-off | Diameter range: 16-30 mm | Number of dies: 4 | Number of stations (incl. cut off): 5 | Cutting length: 320 mm | Shaft length under head: 280 mm | Output – pieces/min: 62 | Press power: 43...

1994 NATIONAL FORMAX FX44LF

• Manufacturer: Formax

Info: bushing cut-off | Diameter range: 14,8 mm | Number of dies: 4 | Number of stations: 7 | Cutting length: 12-158 mm | Shaft length under head: 20-125 mm | Max. thread length: 60 mm | Output – pieces/min: 200

1984 HILGELAND LIZENZ CH1LH

• Manufacturer: Hilgeland

Diameter range: 5-6 mm | Shaft length under head: 60 mm | Max. cut-off length: 80 mm | Output pieces/min: 280

F&P Metal coil cutting - automatic lines

• Manufacturer: Floreani & Partners

Floreani & Partners +39 393 577 2205 Alex/mob. alex.groupmarketing@gmail.com Design, construction, revamping, automation. Buy and sell used lines We operate all over the world -

Cut-to-Length

• Manufacturer: Cut-to-Length

Infeed parts cut-to-length complete line the system is equipped with an S5 controller, which is also used to control a stacker with an outlet section. Stacking at the including roller and chain tables, The compon...

F&P Flying Shear CTL Line (New) #3536.1

• Manufacturer: Floreani & Partners

New Flying Shear Cut To Length Line 1600mm x max. 4mm Aluminium CUSTOM DESIGNED -- 6m Dual Box Sheet Stacker Speed max. 45m / min -- Flying shears accelerate to line speed, make the cut and decelerate. Although ...

Cut-to length slitting machine SM-1250х8

• Manufacturer: Evolutioner

Cut-to-length slitting machine is used for longitudinal cutting of the metal sheets with maximum thickness 1mm, aluminum composite panels, paper, polycarbonate thanks to special cutting knives that are fixed on r...

Single blade cutting line product code: 27908

Hurry! This product has already been viewed 1,693 times! Don't miss out! Don't miss out on this deal Single-blade cutting line, 500mm wide with reel winder, capacity approximately 1.5-2 tons felt press Available ...

F&P Rotary Shear CTL Lines (New) #3535.1

• Manufacturer: Floreani & Partners

2000mm wide lines with precision 6-HI leveler Max. 6mm material thickness Typical line speed: up to 60m / minute Decoiler up to 30ton capacity -- Rotary Shear info & video: in Listing #3259 [Section: Shears for ...

F&P Cutting and surface finishing lines for stainless steel coils & plates

• Manufacturer: Floreani & Partners

New and Used of any capacity -