Used Heat Exchangers in New Jersey, USA

XCHANGER INC C-100-2

• Manufacturer: XChanger

Xchanger Inc. heat exchanger used to heat and cool low pressure gas streams. Model C-100-2. Typical pressure 15 PSI (1 Bar). Air In 2", Air Out 2". Tube inlet 3/4", Outlet 1.5". Used to heat/cool/dehumidify by...

AO SMITH

• Manufacturer: A.O. Smith

892 Sq.ft. Shell and Tube heat exchanger.(316) 5/8" OD x 17'4" Tubes. U Tube. High pressure. Tube and shell both rated 2000 PSI @ 650 degF.

AERCO INTERNATIONAL INC SW1A03

• Manufacturer: International

Qty. (3) each: 15 Sq.Ft. HELITHERM steam to water heat exchanger. Steam is primary or tube side fluid and Water is secondary or shell side fluid. Shell is 10.5" dia x 34.75" L. Has 3 coils.

Block Heat Exchanger 1.6 m² (17.2 ft²) - IPP# 211534

• Manufacturer: Vicarb

SGL Carbon cubic block heat exchanger

Titanium APV SR25 Plate and Frame Heat Exchanger - IPP# 207660

• Manufacturer: APV

Titanium plate heat exchanger CS end plates. (2) 2.5" inlets; (2) 2.5" outlets Temperature in 95F hot side 194F cold side , temperature out 131F hot side 156F cold side .

Stainless Steel 316 Plate and Frame Heat Exchanger - IPP# 108356

• Manufacturer: Superchanger

plate heat exchanger Plate rack 47.40" minimum 49.77" maximum.

Stainless Steel Roestvrystaal Shell and Tube Heat Exchanger - IPP# 221536

• Manufacturer: Roestvrystaal

Type: Duplex heat exchanger (2) duplex s/steel ( .n22.5) bonnet heads

Shell and Tube Heat Exchanger 127.7 m² (1,375 ft²) Stainless Steel 316 - IPP# 83808

• Manufacturer: Heat Exchanger Service

Stainless Steel Graham heat process ltd AEL-762-4878 Shell and Tube Heat Exchanger - IPP# 221548

• Manufacturer: Graham

multi-pass tubeside (2) carbon steel channel heads

HUGHES-ANDERSON ENGINEERING CORP

• Manufacturer: Hughes

used 3,000 sqft Stainless Steel Shell and Tube Heat Exchanger. TUBES: 316 Stainless Steel, (796), 3/4" OD, Rated 135 PSI @ 150/-20 DegF, 12" in/out. SHELL: 304 Stainless Steel, 32" Diameter x 20' L, Rated 150...

ALFA LAVAL A15-BFG

• Manufacturer: Alfa-Laval
• Model: A15-BFG

3463 Sq.Ft. ALFA LAVAL model A15-BFG, Stainless Steel plate heat exchanger. 432 plates each approx. 2' W x 5' H. 6" inlet/outlet.

MANNING & LEWIS

• Manufacturer: Lewis

used 18 Sq.Ft. Shell and Tube heat exchanger. (5) U tubes 3/4 OD x 113 x 14 BWG. Type BEU

PAUL MUELLER AT161B-10

• Manufacturer: Paul Mueller

Approx. 150 Sq.Ft. Used Paul Mueller Plate Heat exchanger. model AT161B-10. (23) 18" w x 54" plates. Part No. 9814361

Ralph Coidan CEB-90A Block Heat Exchanger - IPP# 210003

• Manufacturer: Ralph Coidan

cartridge horizontal cylindrical heat exchanger CE 0040 design pressure service side 7 barg @ 0/+180 degrees C (45 liter), process side 5.2 barg @ 0/+180 degrees C (30 liter) service side passes (row/pass) 8 per ...

Block Heat Exchanger 10 m² (107.6 ft²) - IPP# 706426

• Manufacturer: Ralph Coidan

Hykarb carbon cubic block cross flow heat Exchanger design pressure process side 7.8 barg @ 0/160 degrees C service side 15 barg @ 0/160 degrees C operating pressure process side 5.2 barg + full vacuum @ -0.185 d...