Used Stamping Presses

Bruderer Stock Feed for Stamping Press Rebuilt

• Manufacturer: Bruderer

This is a Bruderer Stock Roll Feed for Stamping Press ....this unit was Rebuilt and in pristine condition! To feed metal flat stock to a high speed Bruderer Press. PTWS - 12012022-LR-9 R070925 Picture# 112920...

Cooper Weymouth 8" Stock Leveler / Straightener with dancer arm to stop and start automatically Feed Metal Strip to Stamping Press

• Manufacturer: CWP

This is a Cooper Weymouth 8" Stock Leveler / Straightener with dancer arm to stop and start automatically. It also has forward and reverse. Straighten Brass, Light Mild Steel, Copper, Gold & Silver... Can be used...

Multi Reel Motorized Coil Feed with Controller for Stamping Press Side Take up

We have 4 complete Reel Units. Palm Tree # LR-0000-110819LR-30 Pic# 101292019 R040521 Bid with Confidence on this item, check our feedback!!! * All information deemed accurate but may vary from model to mode...

88T Amada TPL 80SI #51544

• Manufacturer: Amada
• Model: TPL-80

Year Built – 2000 SPECIFICATIONS: EQUIPPED WITH: Link Drive Operator T-Stand w/Palm Buttons Air Counterbalance Wet Type Clutch & Brake Motorzied Shut Height Adjustment T-Slotted Bolster & Slide Leveling Pads *Pre...

PLC controlled linear movement for stock reel feed system stamping press side

This is a custom PLC controlled linear movement system Palm Tree # LR-0000-110819LR-26 Pic# 101282019 Bid with Confidence on this item, check our feedback!!! * All information deemed accurate but may vary fro...

Rapid Air Automatic Stock Feed B2 Stamping Press Flat or Wire Feeder

• Manufacturer: RapidAir

This is a Rapid Air Automatic Stock Feed - Model #B2 - Spec # 873 - Max Stock Width: 2-1/2" - Max Stroke Range: 2" - Stock Thickness: .002"- .040" - Speed Cycles Per Minute: 230 - Pulling Capacity: 20 Lbs - Esti...

Rapid Air Automatic Stock Feed Model A6 Stamping Press Flat or Wire Feeder

• Manufacturer: RapidAir

This is a Rapid Air Automatic Stock Feed - Model # A6 5050 - Max Stock Width: 1-1/2" - Max Stroke Range: 6" - Stock Thickness: .002"- .160" - Speed Cycles Per Minute: 230 - Pulling Capacity: 20 Lbs - Estimated S...

Rapid Air Automatic Stock Feed Model W20 Stamping Press Flat or Wire Feeder

• Manufacturer: RapidAir

This is a Rapid Air Automatic Stock Feed - Model W20 - Max. Material width is 2" - Max. Stroke is 20" - Stock Thickness is .003" to .050" - Speed cycle is 50 Cycles per minute - Pulling Capacity is 100 Lbs. PTW...

Rapid Air Automatic Stock Feed Model B6 Stamping Press Flat or Wire Feeder

• Manufacturer: RapidAir

This is a Rapid Air Automatic Stock Feed - Model # B6 D4 - Max. Material width is 1-1/2" - Max. Stroke is 6" - Stock Thickness is .002" to .040" - Speed cycle is 160 Cycles per minute - Pulling Capacity is 20 Lb...