Used Processing in Indiana, USA

Sonitek SU-10LB Thermal Press Heat Staking Machine Set 6 Zone PLC Control 3Ph

• Manufacturer: Sonitek

Used, in Good Working Condition. Selling as a set. Right and left. We were not able to fully test. Heating units all heat up as they should. Has PLC temp controls and sensors. Not sure on the voltage. Original ta...

Una-Dyn Solid Cone Hopper, #150, Insulated, Stainless W/Autoload OS-10 Feeder

• Manufacturer: Una-Dyn

In good used condition G55000020 TSC-150,2.5", NO HTR, std lid 150 lb. Solid Cone Hopper Autoload OS-10 Feeder, Movacolor, Volumetric Feeder,110 volt (Feeder does not have a controller) Overall height is 86" Una-...

Una-Dyn Solid Cone Hopper, #150, Insulated, Stainless W/Autoload OS-10 Feeder

• Manufacturer: Una-Dyn

CLICK HERE FOR MANUFACTURER'S SPECS In good used condition G55000028 TSC-150,2.5", NO HTR, std lid 150 lb. Solid Cone Hopper Autoload OS-10 Feeder, Movacolor, Volumetric Feeder,110 volt Overall height is 86" Una-...

Una-Dyn TSC-100 Solid Cone Hopper, Insulated, Stainless W/Autoload OS-10 Feeder

• Manufacturer: Una-Dyn

CLICK HERE FOR MANUFACTURER'S SPECS In good used condition Una-Dyn TCS-100,2.5" NO HTR STD LID SPCL (100 LB. hopper) MO ; 8015687 Autoload OS-10 Feeder, Movacolor, Volumetric Feeder,110 volt Overall height is 87...

Process Control XDGSYAULSEX01 XD Series Continuous Gravimetric Blender 3 Bin

• Manufacturer: Process Control

New Surplus, Acquired From Spare Parts Storeroom. This is new old stock. The one window is broken. Has some surface rust in a few areas. Still has shipping screws in place. Dual control panels. Looks like 120V po...

Triangle Package Selectacom SPD Food Process Bagger Vibratory Scale Weigh Filler

• Manufacturer: Triangle Package Machinery

Used Condition. Removed From a Working Environment. Vibratory Bagger and Sealer Machine. Model B22PD/A612F2RN. Might need serviced and a few minor things replaced. Was recently in use. Electrical panel appears...

IDD Process Packaging Stainless Bulk Dryer System 52x120x96" ID 20kw Blowers x3

• Manufacturer: IDD Process Packaging

Used, in Good Working Condition. This is a dryer system for beverage packaging industry. This would blow dry large volume of products. All stainless construction. Floor is a fiberglass type. Max Inside working is...

Indeeco Process Air Heater 57KW 480V 3Ph 600°F Open Coil Airpure Flanders Filte

• Manufacturer: Indeeco

Believed to be in Working Condition, Unable to Test. This is an inline heater for ductwork. Entry and exit is 12x12" ID. This is a 57 kw 480V heater. Has a Flanders Airpure air filter. If this item ships as Flat ...

(Consignment Lot- Located in Indianapolis, IN) EPAK 180 degree single file conveyor. 5 inch belt, 44

(Consignment Lot- Located in Indianapolis, IN) EPAK 180 degree single file conveyor. 5 inch belt, 44 inch deep, 66 inch across. Equipment not available for removal until January 1st. Equiment MUST be removed by J...

(Consignment Lot- Located in Indianapolis, IN) E-PAK single file product conveyor. 17 feet long by 6

(Consignment Lot- Located in Indianapolis, IN) E-PAK single file product conveyor. 17 feet long by 6 inch wide belt. Equipment not available for removal until January 1st. Equiment MUST be removed by January 10th...

(Consignment Lot- Located in Indianapolis, IN) E-PAK single file product conveyor. 8 feet long by

(Consignment Lot- Located in Indianapolis, IN) E-PAK single file product conveyor. 8 feet long by 6 inch wide belt. Equipment not available for removal until January 1st.Equiment MUST be removed by January 10th R...

(Consignment Lot- Located in Indianapolis, IN) Alpha product conveyor. 5 feet long by 8 inch wide

(Consignment Lot- Located in Indianapolis, IN) Alpha product conveyor. 5 feet long by 8 inch wide belt. Equipment not available for removal until January 1st. Equiment MUST be removed by January 10th RESERVE BID ...

Ro-Tap, Model RX-29

• Manufacturer: Ro-Tap

Ro-Tap, Model RX-29 Used Ro-Tap, model RX-29, .25 hp motor, 110 volt, serial# 23380, built 2004.

Fluid Air 007 Mill

• Manufacturer: Fluid Air

Fluid Air 007 Mill Used Fluid Air hammer mill, model Granumill 007, stainless steel construction, screw feed with motor drive, rotor with motor, xp motors, on stand.

Wor-Tex JC-10L Plastic Granulator Shredder Chipper 8 x 21" 15HP 230/460V

• Manufacturer: Wor-Tex

Used, in Good Working Condition, Tested. 21 blades. Offset stepped. 3" wide each. The bottom of the unit needs a hopper. 18x28x14" max. Motor is 15 hp wired for 480V. Max material size is 14" wide 5" thick for to...