Used Shrink Wrapping Machines

Arpac Shrink Tunnels XT18

• Manufacturer: Arpac

Arpac, Model XT18, Convection shrink tunnel with number of product per minute / hour – depending on material and application. Equipped with 12" in Height; 21" in Width total aperture with 73" Long shrink heat cha...

Arpac Shrink Tunnels XT18

• Manufacturer: Arpac

Arpac, Model XT18, Convection shrink tunnel with number of product per minute / hour – depending on material and application. Equipped with 12" in Height; 21" in Width total aperture with 73" Long shrink heat cha...

Arpac Shrink Tunnels XT18

• Manufacturer: Arpac

Arpac, Model XT18, Convection shrink tunnel with number of product per minute and hour – depending on materials and application. Equipped with 12" in Height; 21" in Width total aperture with 73" Long shrink heat ...

Axon Shrink Tunnels EZ48

• Manufacturer: Axon

Axon, Model EZ-48-14W11-13, dual zone, stainless steel, over the conveyor convection air sleeve shrink tunnel. Number of containers per minute – depending on materials, application and machine configuration. Tota...

Edl Shrink Bundler FBS24

• Manufacturer: Frain Industries

EDL Model FBS22, inline, continuous motion, bundler and integrated shrink tunnel. Rated up to 35 bundles per minute – depending on materials and application. Product size range: 10" to 24" in Length x 5" to 14" i...

Preferred Packaging PP180828 Heat Shrink Tunnel 220V 40A 60Hz 1PH Top Only

• Manufacturer: Preferred Packaging

Used, in Good Working Condition, Tested OK. This is the top unit only. No conveyor. Company this came from probably just mounted on their own conveyor system. This heats up to couple hundred degrees so not just a...

Samuel P-225 Automatic Strapping Machine – 091325847005A

Specifications: MOTORS: Single Phase 115 V., 1/3 Hp Chamber Feed/Strap Take-up Single Phase 115 V., 1/2 Hp Main Drive/Strap Feed

Eastey Heat Tunnel Model: ET1610-36

• Manufacturer: Eastey
• Model: ET1610-36

UNIT is USED. Some minor scratching/blemishes/left over tape/tape/sticker residue can be seen on the surfaces of the heat tunnel, but is not affecting the unit intended use. Unit was removed from a working enviro...

Preferred Packaging Shrink Wrapper

Preferred packaging Model PP 560 shrink wrapper 20 inch wide seal jaw by 24 inch long side seal jaw 15 1/2 inch wide belt can run Approx. 15”Wx 8 1/2 to 9” tall by 20”L package Machine Approximately 37 inch infee...

Arpac Shrink Bundler 45TW28

• Manufacturer: Arpac

Arpac, Model 45TW-28, inline, intermittent motion, bundler and integrated shrink tunnel.Equipped with 70" long x 24" wide in feed conveyor, 29" wide seal jaw with 12" vertical travel, side mounted film racks and ...

Rennco Shrink Semi Auto 301

• Manufacturer: Rennco

Rennco, model 301, semi-automatic, servo controlled, L-Bar sealer. Speed dependent on materials, application, machine configuration and operator dexterity. Package size range: 2" to 23½" in length, 2" to 13½" in ...

Skinetta Shrink Bundler FILM TEQ 3030

• Manufacturer: Kiener - Skinetta

Skinetta, Model Film Teq 3030, Automatic, inline, intermittent motion, single lane up end shrink bundler and tunnel. Rated from 10 to 32 cycles per minute with number of product – depending on materials and appl...

Arpac Shrink Bundler 45TW28

• Manufacturer: Arpac

Arpac, Model 45TW-28, inline, intermittent motion, bundler and integrated shrink tunnel – speed dependent on materials, application and machie configuration. Equipped with 70" long x 24" wide in feed conveyor, 29...

Arpac Shrink Bundler 45TW28

• Manufacturer: Arpac

Arpac, Model 45TW-28, inline, intermittent motion, bundler and integrated shrink tunnel.Equipped with 70" long x 24" wide in feed conveyor, 29" wide seal jaw with 12" vertical travel, side mounted film racks and ...

APV Anderson Shrink Tunnels 486-5

• Manufacturer: APV Anderson

APV Anderson, Model 486-5, stainless steel single zone shrink tunnel. Number of packages per minute – depending on materials, application and machine configuration. Equipped with a 33" Wide x 12" High aperture x...