Used Processing in Switzerland

31184 ENGEL ERC 33/3-C handling robot
- Manufacturer: Engel
Handling robot ERC
St. Gallen, Switzerland
2014 wemo 8-5 Basic2
- Manufacturer: wemo
Handling device WEMO 8-5 Basic2 new/unused! The handling device was never in operation on an injection molding machine, it was procured for a broken project. This is easy to see on the cable tow straps, which ...
Horn, Switzerland
1993 ENGEL 100-600 HL CC90
- Manufacturer: Engel
ENGEL Handling
Horn, Switzerland
1995 ENGEL 200-700 CC100
- Manufacturer: Engel
ANGEL Handling device
Horn, Switzerland
1999 ENGEL 500-125 HLST EC100
- Manufacturer: Engel
ENGEL with few working hours
Horn, Switzerland
1989 ENGEL 275-1300 CC90
- Manufacturer: Engel
Angel 275t / 2750kN Handling device Quick clamping
Horn, Switzerland
1996 ENGEL 200-750 HL CC100
- Manufacturer: Engel
ANGEL Handling system
Horn, Switzerland
1996 ENGEL 70-330
- Manufacturer: Engel
ENGEL injection moulding machine
Horn, Switzerland
1998 ENGEL 150-750 HL
- Manufacturer: Engel
- Model: 150/750HL
ANGEL Holmlos Quick clamping system Interface controllers Handling device
Horn, Switzerland
MAIER JFB.B
- Manufacturer: Maier
- Model: JFB.B
Wavy edges (driver 40 mm high) length x width = 3000 x 250 mm discharge height 1750 mm (height adjustable) Chassis
Gossau, Switzerland
MAIER JFB.B
- Manufacturer: Maier
- Model: JFB.B
Flat - conveyor belt design The flat conveyor belt has an endless conveyor belt, which runs over the drive and deflection roller. The belt can be tensioned via a tensioning station. The upper run of the belts run...
Gossau, Switzerland
31132 ENGEL Plasticizing cylinder&Screw Dia 105
- Manufacturer: Engel
Injection unit consisting of cylinder, screw, cylinder head and back flow valve, fully equipped with heater bands and thermocouples. Ready to use. Cyl. No. 70541, Drawing No. 0401-300-02-01. Screw No.70922, D...
St. Gallen, Switzerland
1983 ENGEL 600-105 ES105/600 CC80
- Manufacturer: Engel
Engel 105t / 1050kN very well maintained, sold due to business. Low number of operating hours Extensive equipment: -Quick-clamping system with clamping pin -Temperature control device interface -Wear-resist...
Horn, Switzerland
ENGEL 80-330 80/330 CC90
- Manufacturer: Engel
- Model: 330/80
Engel 80t / 800kN very well maintained, sold due to business. Low number of operating hours Extensive equipment: -Quick-clamping system with clamping pin -Temperature control device interface -Wear-resistan...
Horn, Switzerland
1986 ENGEL 250-1300 HL 1300/250 CC90
- Manufacturer: Engel
- Model: 250/1300HL
ENGEL 250 tons / 2500kN injection molding machine very well maintained, sold due to business. Low number of operating hours Extensive equipment: -Quick-clamping system with clamping pin -Temperature control devic...
Horn, Switzerland