Used Machine Tools in Lisbon, Portugal

NEORIL UE-916A

• Manufacturer: NEORIL

NEORIL horizontal band saw. Cutting capacity: 230X400mm | Angular cuts: 230X230mm | Tape dimensions: 27X3.035mm | Speeds: 25 40 50 70 meters/min | Wattage: 1,5 hp | Quantity in stock: 3 | Artículos en lote: 27X3....

Prestressing jack 27 wires

• Manufacturer: Paul

Pre-Exertion Jack PAUL. Obs: 27 Strings | State: For Sale | For sale: 27 Strings

MECANICA EXACTA CPE 120

• Manufacturer: MECANICA EXACTA

Scale 120T MECANICA EXACTA CPE120 FA39 FA40 Wire diameter range: 4-13 MM | No. of transformers: 1 | No. of welding controllers: 1 | Wattage: 150 kva at 50% duty cycle | Flexion arm length: 850 MM | State: For Sa...

2006 ABB FRONIUS TRANSPLUS SYNERGIC 4000

• Manufacturer: ABB

ABB FRONIUS TRANSPLUS SYNERGIC 4000 welding robot Width: 2,90m | Length: 4,30m | Height: 2,50m | Weight: 3980 | Wire diameter range: 4-13 MM | No. of transformers: 1 | No. of welding controllers: 1 | Wattage: 15...

2000 ADIRA modelo QHS-6325 CB

• Manufacturer: Adira
• Model: QHS-6325

"ADIRA" press brake 63 tons x 2500mm, model QHS-6325 CB

EURO drilling machine

EURO drilling machine – new Drilling capacity 32 mm Maximum spindle/table distance 820 mm Morse taper CM3

POWERED drilling machine

Drilling machine with 1/2 column belt transmission, 230 V/500W motor, drilling capacity 16 mm, bushing capacity 3-16 mm, 12 speeds from 300-2550 rpm.

OPTI B20 drilling machine

1/2 column drilling machine with belt transmission, 20 mm drilling capacity, 230V/0.55 Kw motor, MT2, 12 speeds 210-2220 rpm, quick-release chuck.

Powered Drilling Machine

PDP33016G drilling machine, High column, belt transmission, 16 mm drilling capacity, 230V/750W motor, 12 speeds of 280-2830 rpm, MT2, equipped with 3-16 mm chuck and clamping press.

POWERED PDP51032G Drilling Machine

New POWERED PDP51032G drilling machine tall column Belt transmission 230 volt motor Table with tilt for angled holes Table with manual movement to raise and lower the table Includes quick-release chuck and clampi...

OPTI DH40 CT drilling machine

Drilling machine with milling table, gear gearbox, high column, rotation direction inverter, 400V/1.1-1.5 Kw motor, drilling capacity 32 mm, MT4, 95-3200 rpm, head with tilt for angles.

KONDIA Tool Milling Machine

• Manufacturer: Kondia

KONDIA brand tool milling machine used in good general condition. Table measuring 1200

Hand Tool

Large stock of hand tools such as different models of wrenches, service wrenches, pneumatic pistols and ratchets, tool sets, trolleys with and without tools, etc.

OPTIMUM magnetic base device

• Manufacturer: Optimum

Electrical connection: 230V / 1Ph ~50Hz | Motor power: 1,89 kW | Max. ø – core drill: Ø 60 mm | Max drilling depth: 50 mm | Max. ø – spiral drill: Ø 23 mm | Max. ø - core bit: Ø 60 mm | Cone tree: CM 2 | Weldon ...

Articulated EFI drilling device

• Manufacturer: Portugal EFI

Drilling machine of national origin of the EFI brand used in excellent condition with lots of little use. Articulated head system Head moves up and down electrically Pneumatic column lock Speed variator system f...