2000 FRECH ZC80/180
- Manufacturer: Frech
Used furnace cabinet for die casting machine make Frech type DAW 80 - suitable for multi-chamber furnace make MELTEC - type 80/180 with individual controllers. Function tested by the manufacturer.
Schorndorf, Germany
1998 FRECH Weightcontrol 2000
- Manufacturer: Frech
Used scales for use on die casting machines up to a unit weight of 2000gr. The device was checked and repaired by the manufacturer. Weighing cell and control board replaced
Schorndorf, Germany
1994 FRECH MOS 5/20 U
- Manufacturer: Frech
Used furnace for use on DAW5 or DAW20 die casting machines without furnace cabinet
Schorndorf, Germany
2007 FRECH Spraymotion 411 E
- Manufacturer: Frech
Used Spraymotion 411 E electric sprayer for use on die casting machines. The device is checked for function by the manufacturer. Including spraying and blowing bar (SR system with regulating nozzles) and stand 24...
Schorndorf, Germany
2001 FRECH M200/120
- Manufacturer: Frech
Used machine furnace make Meltec type M 200/120 for use on hot chamber die casting machines make Oskar Frech with 200 tons for processing magnesium alloys. Melting capacity per hour 120kg/h 54 kW connected load. ...
Schorndorf, Germany
2018 FRECH Z20/120C
- Manufacturer: Frech
Mint and unused machine furnace for DAW20A or DAW20S. The Metec furnace type Z20/120C has a durable stainless steel crucible. Crucible capacity is 420kg, melting capacity per hour 120kg/h at 21.5kW connected load...
Schorndorf, Germany
2014 FRECH ZC200/250
- Manufacturer: Frech
Used machine furnace make Meltec type ZC 200/250 for use on hot chamber die casting machines make Oskar Frech DAW 200 for processing zinc alloys. Melting capacity per hour 250kg/h 36 kW connected load. Switch cab...
Schorndorf, Germany
2000 FRECH DAW 80S
- Manufacturer: Frech
Overhauled die casting machine DAW 80 GO on DataLogic control for the use of zinc alloys. Available on request.
Schorndorf, Germany
2003 Frech Espana DAW 125 PD SBC3
- Manufacturer: Frech
Used die casting machine DAW 125 with SBC3 control for the use of zinc alloys. Available as a basis for a general overhaul at the manufacturer's plant
Schorndorf, Germany
1995 FRECH DAW 200S
- Manufacturer: Frech
Used die casting machine DAW 200 S with Datavario control for the use of zinc alloys. Available by arrangement The manufacturer recommends a general overhaul in the overhaul plant. This can be carried out on requ...
Schorndorf, Germany
1994 FRECH DAW 50
- Manufacturer: Frech
Used machine DAW 50 as a basis for a general overhaul without control cabinet, without oven and oven cabinet A general overhaul can be carried out at the manufacturer's overhaul plant. The scope of the overhaul c...
Schorndorf, Germany
1999 FRECH DAM 315 S
- Manufacturer: Frech
Used die casting machine DAM 315 S with Datacontrol control for the use of magnesium alloys. Available from used machine stock. The machine is equipped with a Rauch type MMO 315E electric furnace. Without sprayin...
Schorndorf, Germany
1992 FRECH DAW 50
- Manufacturer: Frech
Used die casting machine DAW 50 with SBC2 control for the use of zinc alloys. Available from used machine stock. The machine is equipped with a Rauch MO50E electric furnace and a used Oskar Frech 401 pneumatic sp...
Schorndorf, Germany
2024 FRECH W200Zn-ST
- Manufacturer: Frech
Equipment of the machine 1.1.1 Motorized safety gate on the right in the casting direction 1.4.0 Machine bearings 1.5.4 Machine interior lighting 1.11.0 Equipment package - energy efficiency 2.0.1 Ejector assista...
Schorndorf, Germany
2024 FRECH W80Zn-RC
- Manufacturer: Frech
Equipment of the machine 1.0.2 Closing part cover on the base frame for scales / chute 1.1.0 Motorized safety door in casting direction left 1.4.0 Machine bearings 1.5.4 Machine interior lighting 1.11.0 Equipment...
Schorndorf, Germany
Tip: Enter manufacturer, model or keyword