Processing » Foundry & Casting

Building Filters

716

Used processing devices

  • 2022 BMD AM (S) 135.90

    2022 BMD AM (S) 135.90

    • Manufacturer: BMD

    Flask size: LxBxH: 1350 x 900 x 400 / 400 mm Mainly consists of: 1 Moulding machine 5 Cope & 5 Drag Flasks 1 set Filling frame (for each cope & drag) 1 set Pattern plate carrier (for each cope & drag) 1 Driven R...

    Iserlohn, Germany
  • Trusted Seller
    Core shooter RÖPER / GENTEN

    Core shooter RÖPER / GENTEN H2,5

    • Manufacturer: Laempe / Röperwerk

    Overhauled by GENTEN in 2014 Dimensions: Length: 1710mm; Width: 1290mm; Height: 2140mm Monobloc cabin Cabin with 3 doors secured by limit switches Pneumatic doors for core removal With discharge slide With origin...

    Amel, Belgium
  • Trusted Seller
    Semi-automatic moulding line HWS/HSP 1

    Semi-automatic moulding line HWS/HSP 1

      Serial number: 1190, com. number: 10469 Year of construction: 1995, weight: ± 25000 kg Height 2970 mm Plant equipt by several hydraulic units With rotating table, roller stripping Stroke 200 mm, press stroke 200...

      Amel, Belgium
    • Roeperwerk H80

      Roeperwerk H80

      • Manufacturer: Laempe / Röperwerk

      Mainly consists of: Core shooter H80 Roller conveyor for core box without housing Electrical control panel modernised with new Siemens S7 PLC controls and Visual display Lüber amine gasing device Typ LW- FDA 1640...

      Iserlohn, Germany
    • 2017 Foundry Service Auftr. 1175

      2017 Foundry Service Auftr. 1175

      • Manufacturer: Foundry Service

      Mainly consists of: Pour Ladle hanger Drum body (drum vessel) Further technical data, see our web With Ladle book, main inspection and approval 2024

      Iserlohn, Germany
    • 2017 Foundry Service Auftr. 11676

      2017 Foundry Service Auftr. 11676

      • Manufacturer: Foundry Service

      Mainly consists of: Pour Ladle hanger Drum body (drum vessel) Further technical data, see our web With Ladle book, main inspection and approval 2024

      Iserlohn, Germany
    • RÖPER H 2,5

      RÖPER H 2,5

      • Manufacturer: Laempe / Röperwerk

      Table-top machine, shooting volume 2.5 l, core box max. 280x 280/400 x 225 mm, manual adjustment of the upper part, clamping device, vibrating feed chute, housing, electric PLC control, two-hand control panel, Co...

      Meinerzhagen, Germany
    • 2001 RÖPERWERK H 2.5 V-K

      2001 RÖPERWERK H 2.5 V-K

      • Manufacturer: Laempe / Röperwerk

      Shooting volume 2.5 l, core box max. 280x 280/400 x 225 mm, manual adjustment of the upper part, vacuum clamping device, hopper, housing, PLC control, control panel, STEFFENS sand mixer SM-30, GTG gassing device ...

      Meinerzhagen, Germany
    • 1999 LAEMPE Core Drilling Auto

      1999 LAEMPE Core Drilling Auto LKFZ 40 (L-40)

      • Manufacturer: Laempe / Röperwerk
      • Model: LKFZ 40

      Shooting volume 40 l, vertical/horizontal core box division, core box max. 1000 x 650/1190 x 900 mm, vacuum clamping/separating device, sand hopper, cabin, gassing device, hydraulic unit, core sand mixer SM7_3t/h...

      Meinerzhagen, Germany
    • 1978 VOGEL & SCHEMMANN KSM

      1978 VOGEL & SCHEMMANN KSM 6.10.02

      • Manufacturer: Vogel

      Four-column machine, shooting volume 10 l, core box max. 510 x 450 x 450 mm / ___ kg, clamping/separating device, discharge carriage with lifting device, gas flushing plate, vibrating conveyor chute, control unit

      Meinerzhagen, Germany
    • RÖPER H 2,5

      RÖPER H 2,5

      • Manufacturer: Laempe / Röperwerk

      Table machine, shooting volume 2.5 l, core box max. 280x 280/400 x 225 mm, manual adjustment of the upper part, clamping device, vibrating feed chute, manual lever control

      Meinerzhagen, Germany
    • 1991 LAEMPE core-shosing machine L-10

      1991 LAEMPE core-shosing machine L-10 HB

      • Manufacturer: Laempe / Röperwerk

      Four-column machine, shooting volume 10 l, horizontal/vertical core box divider, clamping & separating device, electric heating plates, discharge carriage, gassing carriage, hydraulic unit, safety cabin, sand hop...

      Meinerzhagen, Germany
    • 1988 LAEMPE core shooting machine

      1988 LAEMPE core shooting machine L-5

      • Manufacturer: Laempe / Röperwerk

      Shooting volume 5 l, horizontal and/or vertical core box division, vacuum clamping and separating device, hydraulic unit, safety cabin, sand hopper, electric control B+R

      Meinerzhagen, Germany
    • RÖPER H 16

      RÖPER H 16

      • Manufacturer: Laempe / Röperwerk

      Four-column machine, shot volume 16 l, core box max. 620 x 300 x 475 mm/ 300 kg, clamping & separating device, sand hopper, housing, PLC control system

      Meinerzhagen, Germany
    • 1993 VOGEL & SCHEMMANN KSM

      1993 VOGEL & SCHEMMANN KSM 6.05.00 CO2/CB/VAC/hy. Prop./SPS-99/Unterdr.

      • Manufacturer: Vogel

      Four-column machine, 5 l shooting volume, horizontal/vertical core box division, hydraulic table height adjustment, vacuum clamping device, vibrating infeed chute, safety enclosure, electrical PLC control with tw...

      Meinerzhagen, Germany
    56789

    Overview

    Foundry and casting equipment encompasses the machinery and tools used in the process of metal casting. This includes furnaces to melt metal, molds to shape it, and various other machines to handle the molten material and finish the cast products. Foundries are essential in producing high-quality metal parts and components for a variety of industries, from automotive to aerospace.

    FAQ

    What should I consider when buying used foundry and casting equipment?

    Check the equipment's age, condition, and maintenance history. Ensure it meets your production needs and complies with safety standards. Verify the availability of spare parts and technical support.

    How do I ensure the safe shipping of foundry and casting equipment?

    Use a specialized transport service with experience in heavy and sensitive machinery. Secure the equipment properly to prevent damage during transit.

    What is the maintenance schedule for foundry and casting equipment?

    Regular maintenance includes inspecting and cleaning furnaces, checking for wear and tear on molds, and ensuring all moving parts are lubricated and functioning properly. Refer to the manufacturer’s guidelines for specific maintenance intervals and procedures.