Used process engineering

Gas burner LAMBORGHINI 24PMB-SVA 204.000 k.cal/h

• Manufacturer: Lamborghini

In good condition Motor: 220 mono V, 50 Hz | Pressure: 200 mm H2O | Gas: methanol | Weight: 40 kg

1992 Amine Gas Washer BGT, 20 000 m³/h

With collection tray With exhaust With coarse separator, 2m x 2m x 1,6m

Gas washing tower ARASIN 12.000 m³/h made of polyethylene

Type: GKH14, Com number: 39.152, CH6004783783S15 With pump, command automatic télémécanique, TSX4731 Complete, lots of accessories

Gas washing tower ARASIN, 12 000 m³/h, polythylene

Type GKH14, serial number: COM39.152, CH6004783783s15, 15 kw With pump With command With Ph measurement Complete with very much accessories

Chesterton P1620 Cast Iron Pump Volute Casing 1 X 1.5-8

• Manufacturer: Chesterton

“NEW WITHOUT BOX. IN GOOD CONDITION. SEE PICTURES ATTACHED” Chesterton P1620 Cast Iron Pump Volute Casing 1 X 1.5-8 Chesterton P1620 Cast Iron Pump Volute Casing 1 X 1.5-8 The Chesterton P1620 Cast Iron Pump Volu...

2004 Marconi TRF 200 da 2.000 kg

• Manufacturer: Marconi

Marconi gas holding oven Recently remade refractory Model TRF200 year 2004 Capacity 2,000 kg

1998 Gassing unit coldbox LÜBER LW-FDA-825i

• Manufacturer: Lüber
• Model: LW-FDA 825

Gas pressure is regulated by proportional valve Gas dosing is made by high speed counting All parameters are introduced in the machine panel -gassing pressure -main gassing pressure -pressure ramp -gassing time -...

Overband magnet 650 mm, 2,2 kW

• Manufacturer: EUGEN SEITZ

External dimensions: length 1700 mm, width 1050 mm, height 580 mm Engine: 2,2 kW, 220/380 V, type: drum engine With suspensions on wheels for an easier dismantling

2000 Gassing unit LÜBER LW FDA-825, 8kW

• Manufacturer: Lüber
• Model: LW-FDA 825

With heating 8 kW With contactor control and stainless-steel storage tank 30 litres Compressed air control via proportional valve With micropump, gas metering via rotameter Suitable for central amine gas supply (...

Drying chamber with hearth bogie, 5550 mm x 1350 mm x 2300mm

• Manufacturer: MOURATILLE

With 1 or 2 air circulation ventilators 11 kW, 240/440 V, 1450 rpm With 2 natural gas burners Pyronix typ 12 NMX and gas regulation equipment With hearth bogie, 5150 mm x 1 250 mm

2000 Gassing unit LÜBER LW FDA-825, 8kW

• Manufacturer: Lüber
• Model: LW-FDA 825

With heating 8 kW With contactor control and stainless-steel storage tank 30 litres Compressed air control via proportional valve With micropump, gas metering via rotameter Suitable for central amine gas supply (...

2000 Gassing unit LÜBER LW FDA-825, 8kW

• Manufacturer: Lüber
• Model: LW-FDA 825

With heating 8 kW With contactor control and stainless-steel storage tank 30 litres Compressed air control via proportional valve With micropump, gas metering via rotameter Suitable for central amine gas supply (...

2000 Gassing unit LÜBER LW FDA-825, 8kW

• Manufacturer: Lüber
• Model: LW-FDA 825

With heating 8 kW With contactor control and stainless-steel storage tank 30 litres Compressed air control via proportional valve With micropump, gas metering via rotameter Suitable for central amine gas supply (...

2000 Gassing unit LÜBER LW FDA-825, 8kW

• Manufacturer: Lüber
• Model: LW-FDA 825

With heating 8 kW With contactor control and stainless-steel storage tank 30 litres Compressed air control via proportional valve With micropump, gas metering via rotameter Suitable for central amine gas supply (...

1982 Semiautomatic shell moulding machine for cold and hot box, FMI

• Manufacturer: G&F + FMI

Construction year: 1982, weight: 500 kg Clamping dimension of the thermal jaws: 450 mm x 320 mm, one chucking side fixed, one chucking side mobile Heated with gas Gas heating with mobile gas plate With pneumatic ...