Used pump controllers

NEW gassing units LÜBER, type LW-FDA 1640

• Manufacturer: Lüber
• Model: LW-FDA 1640

Brand Lüber With heating 16 kW Max core weight 80 kg (± 55 l) With contactor control With stainless feeder tank 30 l Compressed air connector 1,5" (Ø 40 mm) With micro pump, gasdosing by rotameter Compressed air ...

NEW gassing units LÜBER, type LW-FDA 825i

• Manufacturer: Lüber
• Model: LW-FDA 825

Outside depth 625 mm With heating 8 kW Max core weight 35 kg (± 25 l) With contactor control With stainless feeder tank 30 l Compressed air connector 1" (Ø 25 mm) With micro pump, gasdosing by rotameter Compresse...

NEW gassing units LÜBER, type LW-FDA 825

• Manufacturer: Lüber
• Model: LW-FDA 825

Outside depth 625 mm With heating 8 kW Max core weight 35 kg (± 25 l) With contactor control With stainless feeder tank 30 l Compressed air connector 1" (Ø 25 mm) With micro pump, gasdosing by rotameter Compresse...

Automated core shooter RÖPER H5

• Manufacturer: Laempe / Röperwerk

Largest core box dimensions: width 460 mm, depth ± 500 mm, height 400 mm with vacuum pump and gas flushing plate With complete housing, core discharge plate, suction pipes, with hydraulic side clamping and hydra...

Furan sand mixer ±4-5t/h OMEGA

• Manufacturer: Omega

Mixing arm movable With 3 daily hoppers, 1m³ each With 1 dosing screw With 2 roller conveyors; length: 2950mm; length: 4100mm With Mitsubishi D700 control unit ±12KW, 380V; 32A With 2 pumps Without steel construc...

Core shooter LAEMPE 40 l

• Manufacturer: Laempe / Röperwerk

Air tank 100 l, clamp with vacuum plate Gassing carriage with vacuum clamping, gassing plate 1000 mm x 800 mm Electronic control PLC B&R (BERCHNECKER UND RAINER), Type NT33 Welded construction Motor for the hydra...

1996 Screw mixer WÖHR, 5 t, 1 swivelling arm

• Manufacturer: Wöhr

Engine: 12 kW, 400 V, 50 Hz, serial number: 345287 Continuous screw mixer WÖHR 3 pumps PTS-acid Beta-set Sand dosing slide With automatic sand dosing With 3 compartiment sand hopper on feet Control board SIEMENS ...

2004 Articulated arm screw mixer EUROTEK, 20 t/h

• Manufacturer: Eurotek

External dimensions: length 6000 mm, width 1250 mm, height 3630 mm With turbo mixing screw 15 kW First arm transport belt with motorized rotation and pneumatic brake Regulated sand inflow by 4 pneumatic slides co...

Furan sand screw mixer BORDEN, ± 2 t/h with silo

Type: Micro 86, Serial number: 164 The mixer is hanging under the bunker External dimensions when fully mounted: 5800 mm x 2240 mm, h. 5400 mm Mixer motor UNELEC, TtypeT132M16; 4 kW; 960 rpm; 220/380 V Bunker wit...

Furan sand molding carousel with mixer AXMANN, 20 t/h

• Manufacturer: Axmann

Type: TMVG 20, serial number: 4955 Year of construction: 1985, weight: ± 7500 kg Mixer with turbo screw, 860 mm, Ø 280 mm, motor 18,5 kW Height outlet: 2270 mm, filling height: 3350 mm, with premixing screw 1600 ...

2000 Mixing plant for core sand LÜBER 7,5t/h

• Manufacturer: Lüber

Complete installation with 2 core sand mixers Mixer capacity / filling volume: Both mixers are mobile With laterally movable weighing hopper With 1 sand silo 6m³ separated in 2 (for old and new sand) With 3 dosin...

Thermic sand reclamation plant IMF, 1 t/h

Comprising: Combustion chamber, cooler, fluid bed Sand silo 6 m³ Dust collector ± 18000 m³ /h, cleaning by air impulse Control automat Siemens 7 Without sand feeder, cooling tower and water pumps (available again...

Articulated furan sand mixer IMF, 20 t/h

Type: T36/20S, serial number: 071/98 Turbo screw with gear motor 15 kW First arm is a belt conveyor with gear motor 0.75 kW Motorized with a gear-brake motor 0.37 kW Two with 2 gear wheel pumps (1 in ertalon and...