Used h

Drum sieve ± 120 t/h

Mounted on steel construction, total height 7300mm With bunker, belt conveyor, filter Motor 15 kW, 400 V, 1460/22 rpm

CNC Milling Machine Fixture Table 22"x22"x29" Steel Cast Iron Plate Block

In Good Used Condition. 5/8-11 threaded holes. 22 x 22" Stands 29"H Overall dimensions. Top work surface is not tapped. Not all holes are tapped. Some shavings still inside. The lifting eyelet is not included in ...

CNC Milling Machine T-Slot Table 22"x28" Steel Cast Iron Slotted Fixture Plate

In Good Used Condition. 3-Slot table. Side is 12x33" 23"W x 34"L x 16"H Overall dimensions. Slotted work surface 22"W x 28"L. T-Slot width 1.25" If this item ships as Flat Rate Freight please see details in Shipp...

Screw mixer WÖHR 20-40t/h

• Manufacturer: Wöhr

Useful dimensions: Outlet: 2500mm; conveyor belt: 4000mm Control board SIEMENS S7 300, 400V 50Hz 2 pumps for acid/ hardener with flow measurement ENDRESS&HAUSER For furan sand 3 dosages for sand The 2 arms motori...

Aerothermic stove 40,3kW 4065m³ /h JOGA

700 rpm, 220 V mono Max temperature entry 130°C Pressure 11 bar Ventilator 5 speeds Pressure air 12 mbar, with mural clips

Sand plant DISA, 120 t/h

400 V, 50 Hz - Mixer DISA SAM16-160 - Sand hopper ± 150 m³ and continious sand circulation system - 3 additive hopper, dosing screws - Sand analyzer - Sand and additive weighing - Sand elevator - Polygon screen -...

Sand aerator rotating ± 10 t/h

• Manufacturer: T KETIN & R THIRIANT

Sand entry 300mm, Ø 240mm entry sand Transmission by wheel Ø 200mm (flat)

Sand reclamation SEGAB/ KLEIN, 20 t/h

• Manufacturer: Segab

Shake-out SEGAB, max. loading 20 t, dimensions 5 m x 3 m 3 x sand feeder SEGAB Reclaiming SEGAB: - Hot sand silo 150 t - 2 x attrition unit KLEIN - 1 x fluid bath cooler - 2 x sand feeder KLEIN - Electric control...

Mixing plant for core sand LÜBER 2,5t/h

• Manufacturer: Lüber

3×400V; 50A; 50Hz; 22kW Core sand mixer on rails With 1 sand hopper with weighing system and 2 additive hoppers With 2 dosing valves With platform, railing and stairs With transfer car on KBK rail system ±35m KBK...

Scrubber ARASIN GKOV 100 6.000 m³/h

Year of manufacture 1988 This unit consists of: Scrubber 6000 m³/h Air circulation pump New control box SIEMENS tia Protal Collecting tank around the scrubber Dust filter in the pipeline fresh acid pump New PH co...

Thermical reclamation plant, RICHARDS, ± 3 t/h

Gas-heated cold resin recovery, capacity 2-3 t/h Consisting of: - Combustion chamber - Loading chute and bunker ± 2 m² - Fluidised bed cooler, air and water cooling - 2 air blowers - Control cabinet, SIEMENS S7 c...

Furan sand mixer ±4-5t/h OMEGA

• Manufacturer: Omega

Mixing arm movable With 3 daily hoppers, 1m³ each With 1 dosing screw With 2 roller conveyors; length: 2950mm; length: 4100mm With Mitsubishi D700 control unit ±12KW, 380V; 32A With 2 pumps Without steel construc...

Furan sand mixer BORDEN, ± 2 t/h

Motor UNILEC, type T132, serial number 410416N00003; 4 kW; 220/380 V; 960 rpm 1 x input sand with bucket 20 mm x 50 mm, without bucket 80 mmx 80 mm 1 x additional sand input, Ø 50 mm Between axles enter and exit...

Reclaiming plant for furan sand, 5 t/h

• Manufacturer: G.U.T. /CYRUS

consisting of: - shake out, 2350 mm x 1850 mm, with cabinet - vibrating conveyor - magnet separator (overbelt) - bucket elevator - silo 50 t - attrition unit CYRUS, motor 5,5 kW, 400 V, 960 rpm - oscillating scre...